Abstract:In-cylinder air motion is one of the most important factors that control the degree of mixture preparation and thus is fundamental to improvements in the combustion process and overall engine performance. The major aim of this paper is to elucidate, through a predictive study, the main features of in-cylinder flow fields in a motored homogeneous charge compression ignition (HCCI) engine cylinder with variable negative valve overlapping (NVO). A commercial finite-volume computational fluid dynamics (CFD) package was used in the programme of simulation. The computational model was validated through a qualitative comparison between CFD results and the available experimental data. Thus one of the main developments presented in this study is the investigation of the intake process of the HCCI engine with various valve strategies, and it is perhaps the first time (to the current authors' best knowledge) that a direct comparison has been made of the results obtained in the same HCCI NVO motored engine using modelling and experimental approaches. The comparison illustrated a fair agreement between both sets of results, with some differences. A parametric predictive study of the effects of variable valve timings on the in-cylinder air motion has then been carried out. Three different sets of valve timings have been applied to the intake and exhaust valves to generate NVO of 70, 90, and 110 degrees of crank angle (°CA). The NVO was controlled by adjusting the times of exhaust valves closing (EVC) and intake valves opening (IVO) while keeping the times of exhaust valves opening (EVO) and intake valves closing (IVC) unchanged. The predicted results show a noticeable modification of the strength and the global direction of the in-cylinder charge motion as a result of increasing the magnitude of NVO. Modifications of in-cylinder swirl and tumble motions obtained by applying higher degrees of NVO are expected to have a considerable effect on the air-fuel mixture preparation process as well as the actual in-cylinder conditions at the end of the compression stroke.

Analysis of In-cylinder Flow Field Anisotropy in IC Engine using Large Eddy Simulation

Computational Fluid Dynamics of Four Stroke In-Cylinder Charge Behaviour at Distinct Valve Lift Opening Clearance in Spark Ignition Reciprocating Internal Combustion Renault Engine

In-Cylinder Flow Field of a Diesel Engine

Research on In-cylinder Cold Flow of a Two Stoke Engine with A Large Eddy Simulation

Analysis of In-cylinder Flow in a Small-Bore Spark-Ignition Engine Using Computational Fluid Dynamics Simulations and Zero-Dimensional-Based Modeling

Large eddy simulation analysis of the turbulent flow in an optically accessible internal combustion engine using the overset mesh technique

A critical review of flow field analysis methods involving proper orthogonal decomposition and quadruple proper orthogonal decomposition for internal combustion engines

3D Proper Orthogonal Decomposition Analysis of Engine In-Cylinder Velocity Fields

Statistical analysis of flow field variations via independent component analysis

Study of Time-Resolved Vortex Structure of In-Cylinder Engine Flow Fields Using Proper Orthogonal Decomposition Technique

Dynamic Mode Decomposition for Extracting Cycle-to-Cycle Variation of SIDI Engine In-Cylinder Flow Under Motoring Condition

Flow-pattern switching in a Motored Spark Ignition Engine

Evaluation of a Near-Wall-Modeled Large Eddy Lattice Boltzmann Method for the Analysis of Complex Flows Relevant to IC Engines

Computation and Validation of In-Cylinder Flow Field, Swirl and Flow Coefficients for a Naturally Aspirated Single Cylinder Diesel Engine

Computational Fluid Dynamics Simulation of In-Cylinder Flows in a Motored Homogeneous Charge Compression Ignition Engine Cylinder with Variable Negative Valve Overlapping

An experimental study of the detailed flame transport in a SI engine using simultaneous dual-plane OH-LIF and stereoscopic PIV

Analysis of combustion acoustic phenomena in compression–ignition engines using large eddy simulation

Flow Simulation in Port and Cylinder of a Small Motorcycle Engine with Inclined Valve

Multi-plane Time-Resolved Particle Image Velocimetry (PIV) Flow Field Measurements in an Optical Spark-Ignition Direct-Injection (SIDI) Engine for Large-Eddy Simulation (LES) Model Validations

Cyclic Analysis of In-Cylinder Vortex Interactions Based on Data-Driven Detection and Characterization Framework

Comparison of Experimental and Computational Results in A Cyclic Flow