Abstract:An optimum drying routine for producing non-sulphited mango slices has been developed. The interaction of essential drying parameters (air temperature, air velocity, dew point, slice thickness and drying time) on water activity (aW) and browning was determined. Microbiological stability of the dried product was achieved at a moisture content of 17% wet base (w.b.) corresponding to aW=0.6. Browning was monitored by the red colour shade of the product (CIE-Lab chromaticity coordinate a*). Drying air temperature and drying time were shown to be the primary factors influencing product colour and aW. In contrast to common practice, drying for about 6 h at elevated air temperature (80 °C), instead of 50 or 60 °C for a longer time, was optimal, since significant colour changes of the mango slices were not observed even without the use of any chemical or thermal pre-treatment. Moreover, at increased temperature, drying time was considerably shortened from about 9 h to 6 h, resulting in significant extension of the drying capacity.Industrial RelevanceThe suggested process concept for dried mango slices based on high-temperature drying is of utmost significance for the international marketing of dried fruit products. Chemical pre-treatments such as sulphitation often used to minimise quality deficiencies could be avoided. Sulphitation has been recently under critical consideration with respect to allergen labelling of foodstuffs implemented by EU-Member States in November 2004 (Directive 2003/89/EC) [Directive 2003/89/EC. Official Journal of the European Union, 25.11.2003, pp. L308/15–18 (http://europa.eu.int/eur-lex/pri/en/oj/dat/2003/l_308/l_30820031125en00150018.pdf)]. Export quality was improved and the drying process simplified, improving the utilisation of drying capacities. Particularly referring to an application of the technology in small- and medium-sized enterprises with limited investment possibilities, the suggested novel drying procedure in mango processing aimed at the optimisation of well-established simple drying methods instead of choosing technically more sophisticated technologies.

Performance of different process additives on the properties of mango powder obtained by drum drying

Evaluation of water sorption isotherm, glass transistion temperature, vitamin C and color stability of mango peel powder during storage

Maltodextrin as a Drying Adjuvant in the Lyophilization of Tropical Red Fruit Blend

Effects of the spray-drying process using maltodextrin on bioactive compounds and antioxidant activity of the pulp of the tropical fruit açai (Euterpe oleracea Mart.)

Drum drying process of jabuticaba pulp using corn starch as an additive

Microwave–osmotic–vacuum combination drying of mango cubes with maltodextrin moderated sucrose solution

Investigating the Water Relations in Aqueous Extract Powders of Mango (Mangifera indica) Peel and Seed Waste for Their Use in Food Matrices as a Value-Added By-Product

Foaming characteristics and impact of ethanol pretreatment in drying behavior and physical characteristics for avocado pulp powder obtained by foam mat drying

Extending the shelf life of mango (Mangifera indica L.) fruits by using edible coating based on xanthan gum and pomegranate peel extract

Obtaining and characterization of natural extracts from mango (Mangifera Indica) peel and its effect on the rheological behavior in new mango kernel starch hydrogels

Analysis of energy consumption, heat and mass transfer, drying kinetics and effective moisture diffusivity during foam-mat drying of mango in a convective hot-air dryer

Biopolymers to overcome challenges in açaí pulp drying: Processing and powder quality evaluation

Statistical-Based Optimization of Modified Mangifera indica Fruit Starch as Substituent for Pharmaceutical Tableting Excipient

Quality improvement of non-sulphited mango slices by drying at high temperatures

A Comparative Study of Drying Technologies for Apple and Ginger Pomace: Kinetic Modeling and Antioxidant Properties

Adjusting Experimental Parameters to Modify Corn Starch with Glycidyl Methacrylate to Tune Specific Properties

Enhancing mass transfer and preserving heat-sensitive quality of mango through foam mat drying

Maintenance of postharvest quality of 'Palmer' mango coated with biodegradable coatings based on cassava starch and emulsion of lemongrass essential oil

Changes in mango foam morphology and its effects on texture and selected phenolics during foam mat drying

Dry Bacterial Cellulose and Carboxymethyl Cellulose formulations with interfacial-active performance: processing conditions and redispersion

Improving the rheological properties of ultra-processed powdered goat milk beverage using texture additives