Abstract:With the advancement and accessibility of local probing techniques that can operate at the submicron scale it has become possible to analyse the local corrosion properties of industrially important metallic materials and relate these properties to microstructure characteristics of the same materials. In this doctoral study the focus has been on copper-zinc samples, both as industrial brass alloys and as micro-patterned copper-zinc samples. They have been exposed to dilute chloride solutions and to an atmosphere that mimics indoor conditions that cause corrosion. The main goal has been to investigate micro-galvanic effects caused by surface heterogeneities in the copper-zinc samples, and the corrosion inhibition ability of a self-assembled octadecanethiol (ODT, CH3(CH2)17SH) monolayer when applied to these heterogeneous samples. The local chemistry, local electrochemistry, and local surface chemistry in the presence of the copper-zinc galvanic couplings have been elucidated, and their importance has been investigated for corrosion initiation, propagation, termination, and inhibition. A broad spectrum of local probe techniques has been utilised. They include optical microscopy (ex situ and in situ), electrochemical techniques, scanning electron microscopy with energy dispersive spectroscopy, atomic force microscopy, scanning Kelvin probe force microscopy and confocal Raman spectroscopy. In addition, infrared reflection absorption spectroscopy (in situ) and vibrational sum frequency spectroscopy have been employed to analyse the formation of corrosion products and monitor the corrosion kinetics. A characteristic selective zinc dissolution process was triggered in non-metallic inclusions when a brass alloy was exposed to 1 mM NaCl. Disc-like corrosion areas spread radially outwards from the inclusions, the shape and termination of which was attributed to accessibility to chloride ions. An ODT-layer deposited on brass retarded access to chloride ions at the brass surface and slowed down the radial corrosion process. Instead a delayed formation of filiform-like corrosion was observed. Upon exposure of the copper-zinc patterned sample to humidified air containing formic acid, micro-galvanic effects were induced by the copper patches on zinc that accelerated the zinc dissolution in the thin aqueous adlayer with concomitant precipitation of zinc formate. The micro-galvanic effects not only resulted in accelerated corrosion rates for zinc, but also in broadening of shapes and atomic structures for the corrosion products formed. Crystalline zinc oxide and zinc formate were observed on the copper-zinc patterned samples, whereas amorphous zinc oxide and zinc formate were formed on the bare zinc surface. Micro-galvanic effects occurred in the two-phase Cu40Zn (Cu with 40 wt% Zn) brass alloy as well, induced by more zinc-rich beta-phase grains surrounded by an alpha matrix with lower zinc-content. The application of a self-assembled monolayer of ODT for corrosion inhibition of pure zinc and the patterned copper-zinc samples was also explored. In situ infrared reflection absorption spectroscopy analyses showed that ODT initially reduced the rate of zinc formate formation on pure zinc and on the copper-zinc micro-patterned sample. However, the inhibition efficiency was slightly reduced with exposure time due to local removal of ODT on pure zinc and on the micro-patterned samples. This caused micro-galvanic effects that resulted in increased rates of zinc formate formation on the ODT-covered samples – even higher than on the uncovered samples. When applied to the single-phase Cu20Zn alloy, ODT resulted in a corrosion inhibition that was comparable to that of pure copper, a metal for which ODT has shown very good corrosion inhibition. On double-phase Cu40Zn local galvanic effects resulted in less efficient corrosion inhibition and more abundant corrosion products than on Cu20Zn. Based on vibrational sum frequency spectroscopy, the ODT-layer retained its well-ordered molecular structure throughout the exposure to both Cu20Zn and Cu40Zn. In all, the inhibiting action of the ODT-layer was attributed to the transport hindrance of corrosion promoters (O2, H2O, and HCOOH) to the brass surface. This result suggests that ODT can function as a temporary corrosion inhibitor for brass exposed to benign indoor environments.

20304 The Effect of Dissolved Oxygen and Conductivity of Deionized Water on Copper Corrosion

Revealing the Effect of O2, SO2 and H2O in Supercritical CO2 on the Corrosion Behavior of 316L Steel at Elevated Temperature

Effect of Copper Ion and Water on Anodic Dissolution of Metallic Copper in a Deep Eutectic Solvent (DES)

Effects of alternating dissolved oxygen and dissolved hydrogen on the corrosion behavior of alloy 52 in high temperature high pressure water

Influence of the Dissolved Oxygen Concentration in Artificial Seawater on the Corrosion Behavior of Q235 Mild Steel

Exploring sustainable corrosion inhibition of copper in saline environment: An examination of hydroquinazolinones via experimental and ab initio DFT simulations

Effect of Copper(II) Ions on Corrosion Resistance of Al-Zn Coated 5052 Aluminum Alloy in Seawater

The Influences of Traces of Oxygen and Sulfide on the Corrosion of Copper in Concentrated Chloride Solutions

A Study on Corrosion Behavior of Type 304 Stainless Steel with Electrochemical Impedance Spectroscopy in High Temperature Pure Water

Effect of Dissolved Oxygen for Advanced Wet Processing

Temporal Aspects of Corrosion Inhibition on Copper, Silver, and Copper-Silver Alloy: An Electrochemical Impedance Spectroscopy Study

INHIBITION OF CORROSION UNDER DESALINATION CONDITIONS, 5. CORROSION RATES OBTAINED ON COPPER ALLOYS WITH A CHROMATE-PHOSPHATE INHIBITOR

Corrosion characteristics of copper microparticles and copper nanoparticles in distilled water

Effect of Temperature and NaClO on the Corrosion Behavior of Copper in Synthetic Tap Water

Study on corrosion inhibition performance of 1-dodecyl-3-methyl-1 h-imidazolium nitrate on Cu in the sulfuric acid environment

Inhibition of Copper Corrosion in Sodium Chloride Solution by the Self-Assembled Monolayer of Sodium Diethyldithiocarbamate

Study on the Initial Atmospheric Corrosion Behavior of Copper in Chloride-Containing Environments

Corrosion Properties of a Novel Bulk Cu0.5NiAlCoCrFeSi Glassy Alloy in 288 °C High-Purity Water

Corrosion and stress corrosion behavior of CuCrZr alloy in high temperature pure water environment relevant to Japan's DEMO divertor

Corrosion of Copper, Cupronickel, Nickel Aluminium Bronze and Super-Duplex Stainless Steel Rotating Cylinder Electrodes in Seawater under Turbulent Flow Conditions

Octadecanethiol as Corrosion Inhibitor for Zinc and Patterned Zinc-Copper in Humidified Air with Formic Acid