Abstract:The (1 − x)(Li 0.03 Na 0.5 K 0.47 )(Nb 0.92 Sb 0.05 Ta 0.03 )O 3 –xBa 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (LNKNST–BCZT, x = 0, 0.5, 1.5, 2.5, and 3.5%) lead-free piezoceramics were synthesized by the conventional solid-state reaction method with adding nano-sized Ba 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (BCZT) powder to investigate their influences on crystal structure and electrical properties. The X-ray diffraction (XRD) analysis reveals that all the sintered LNKNST–BCZT ceramics exhibit pure perovskite structure with the mainly rhombohedral (R) phase or the coexistence of rhombohedral (R) phase and tetragonal (T) phase. The composition of the LNKNST–1.5%BCZT ceramics locates around the critical point, i.e., the ceramics changing from the coexistence of rhombohedral (R) phase and tetragonal (T) phase to purely rhombohedral (R) phase, and presents the most densified microstructure morphology, which can be confirmed further by the field emission scanning electron microscope (FESEM) observation. There are two dielectric anomalies in the temperature dependent dielectric properties curves of the LNKNST–BCZT ceramics, which correlate with the ferroelectric rhombohedral (R) phase changing to the ferroelectric tetragonal (T) phase, and then to the paraelectric cubic (C) phase. Both the Curie–Weiss law and the power law fittings confirm the diffuse phase transition ferroelectrics characteristic of the LNKNST–1.5%BCZT ceramics, which is considered as correlating with the polar nanoregions (PNRs). Due to the densification effect caused by the chosen amount of nano-sized BCZT doping and the construction of R–T polymorphic phase boundary, the LNKNST–1.5%BCZT ceramics exhibit the best ferroelectric and piezoelectric properties. The complex impedance spectroscopy analysis confirms that the extrinsic electrical conduction mechanism at high temperatures is dominated by the oxygen vacancies induced by the evaporation of the alkali metals during sintering.

Low temperature synthesis and enhanced electrical properties of PZN–PNN–PZT piezoelectric ceramics with the addition of Li2CO3

High piezoelectricity of low-temperature sintered Li2CO3-added PNN–PZT relaxor ferroelectrics

Low temperature sintering of Li2CO3 added Pb(Ni1/3Nb2/3)-Pb(Zr,Ti)O3 ceramics with high piezoelectric properties

Low‐temperature sintered 0.5Pb(Ni1/3Nb2/3)O3–0.16PbZrO3–0.34PbTiO3 piezoelectric textured ceramics by Li2CO3 addition

Enhanced Piezoelectric Properties and Thermal Stability of LiNbO3-modified PNN–PZT Ceramics

Achieving superior electrical properties of PZT-PNN piezoelectric ceramics through low-temperature sintering with PbO-CuO eutectic additives

Enhancement of piezoelectric properties and temperature stability by forming an MPB in KNN-based lead-free ceramics

Ultra-high piezoelectric and dielectric properties of low-temperature-sintered lead hafnium titanate-lead niobium nickelate ceramics

Enhancement of Piezoelectric Properties in Low-Temperature Sintering PZN–PZT Ceramics by Sr2+ Substitution

Investigation of phase structure and electrical properties of PMN-PSN-PNN–PZT ceramics with different PNN content

Effect of MnCO3 on the Electrical Properties of PZT-based Piezoceramics Sintered at Low Temperature

Competition of Li+ and Cu2+ ions dopant in BiAlO3–Pb(Zr,Ti)O3 piezoelectric ceramics in low temperature sintering processes

Effects of nano-sized BCZT on structure and electrical properties of KNN-based lead-free piezoceramics

Processing, microstructure and piezoelectric properties of Li-doped BCZT ceramics

Facile Preparation and Performance of Novel High-Tc Xbi(ni1/2ti1/2)o3-(1-x)pb(zr1/2ti1/2)o3 Piezoceramics

Enhancing Electrical Properties of High-Curie Temperature Piezoelectric Ceramics BNT-PZT and Their Mechanism

Low-temperature co-fired PZNN-PZT multilayer piezoelectric ceramics with excellent electrical and bending properties

Enhanced piezoelectric properties and phase transition in PZT ceramics induced by Li+-Sm3+ ionic pairs

High piezoelectricity induced by lattice distortion and domain realignment in Li 2 CO 3 -added lead-based ceramics

Low-temperature Sintering of (K,na)nbo3-Based Lead-Free Piezoceramics with Addition of LiF

Piezoelectric enhancement of 0.6Pb(Zr,Ti)O3–0.4Pb(Ni1/3Nb2/3)O3 ceramics with artificial MPB engineering