Abstract:CFRP (Carbon Fiber Reinforced Polymer) is widely used in the aerospace, automobile and construction industries. Its non-homogeneous and anisotropic nature often results in unfavorable hole quality during the drilling process, and exit delamination is a resulting phenomenon that has received much attention. Exit delamination occurs when the drilling thrust force exceeds the critical thrust force. It adversely affects product quality and may even result in rejection. The thrust force on the chisel edge is an important component of the total thrust force, and it helps to predict the total thrust force so that delamination can be reduced or avoided. In this study, noticing that the chisel edge has a certain length, the author puts forward the novel concept of the azimuth angle on the basis of the micro analysis of the contact state between the chisel edge and the carbon fiber. In addition to the orientation angle of the carbon fiber, the azimuth angle of the cutting edge is also an important factor that affects the thrust force. A single carbon fiber may be modeled as a beam on an elastic foundation, and the prediction model of thrust force on the chisel edge is established based on the theory of bending fracture. The model can reflect the influence of the material properties, cutting tool geometry parameters (including the length of chisel edge, rake angle and blunt radius of cutting edge), drilling process parameters, and ultrasonic vibration parameters on the thrust force on the chisel edge and quantitatively explain the reduction of thrust force and improvement of drilling quality during the longitudinal ultrasonic vibration drilling. The prediction model of the thrust force presented in this work can make up for the shortages of qualitative interpretation. The law of periodic variation of the chisel edge thrust force with the azimuth angle helps in developing a deep understanding of the CFRP drilling process and the material removal mechanism. The basis is provided in order to reduce and avoid the exit delamination defects in drilling, and to reasonably and quantitatively determine the spindle speed, feed rate, and drill bit geometry parameters. The reliability of the prediction model is verified by a drilling test.

Experimental characterization and finite element modeling of critical thrust force in cfrp drilling

Analytical study of delamination damage and delamination-free drilling method of CFRP composite

Thrust Force on the Main Cutting Edge when Cutting Carbon Fiber Reinforced Plastics

Experimental evaluation and modelling of drilling responses in CFRP/honeycomb composite sandwich panels

Mechanics of thrust force on chisel edge in carbon fiber reinforced polymer (CFRP) drilling based on bending failure theory

Delamination and thrust force mitigation during drilling of unidirectional CFRP laminate using magnetorheological elastomer

Experimental Investigation of drill tool types on delamination error in drilling of CFRP

Modeling Evolution of Cutting Force in Ultrasonically Assisted Drilling of Carbon Fiber Reinforced Plastics

Cutting force and hole quality analysis in micro-drilling of CFRP

Study on Burr Formation and Tool Wear in Drilling CFRP and Its Hybrid Composites

Assessment of thrust force, delamination and temperature during drilling of basalt fiber-reinforced composite with different drill geometries

A Study on Drilling High-Strength CFRP Laminates: Frictional Heat and Cutting Temperature

Simulation and experimental research on longitudinal-torsional ultrasonic vibration drilling of CFRP/Ti laminates

Optimization of Drilling Parameters on Delamination and Burr Formation in Drilling of Neat CFRP and Hybrid CFRP Nano-Composites

Effect of Drilling Parameters and Tool Geometry on the Thrust Force and Surface Roughness of Aerospace Grade Laminate Composites

Mechanical model for predicting thrust force with tool wear effects in drilling of unidirectional CFRP

Combined analysis of wear mechanisms and delamination in CFRP drilling

High reliability model of mechanical response in drilling of CFRP/Al stacks

An analytical approach to cutting force prediction in milling of carbon fiber reinforced polymer laminates

Improving hole quality of thick CFRP laminates through a laser-mechanical compound drilling process

Experimental Analysis and Application of a Multivariable Regression Technique to Define the Optimal Drilling Conditions for Carbon Fiber Reinforced Polymer (CFRP) Composites