Abstract:The Pancharatnam–Berry (PB)-phase liquid crystal (LC) planar optical elements, featuring large apertures and a light weight, are emerging as the new generation optics. The primary method for fabricating large-aperture LC planar optical elements is through photo-alignment, utilizing polarization laser direct writing. However, conventional polarization direct writing suffers from an inertia-induced stopping step during splicing, leading to suboptimal optical effects. Here, we propose a novel highly efficient method for arbitrary polarization patterning, significantly reducing interface splicing errors in these optical elements. (We call it dynamic polarization patterning technology). This process involves simultaneous mobile splicing and real-time generation of different polarization patterns for exposure, eliminating the inertia-related splicing interruption. As a demonstration, we fabricated a lens with an aperture of approximately 1 cm within 30 min at 633 nm. Furthermore, we developed a 100% fill-factor lens array (3 × 3) with an element lens diameter of approximately 7 mm within 1.5 h at 532 nm. Their focal lengths were uniformly set at 30 cm, demonstrating superior convergence capabilities within their designated working wavelengths, alongside commendable performance in converging light across various other wavelengths. Our measurements confirmed the good focusing performance of these samples. The convergence spot size of the lens deviated by approximately 40% from the theoretical diffraction limit, whereas the lens array exhibited a deviation of around 30%. The dynamic polarization direct writing during uniform platform movement reduced splicing errors to a mere 100–200 nm. The enhancement in imaging quality can be primarily attributed to the innovative use of mobile polarization splicing exposure technology, coupled with the inherent self-smoothing properties of LC molecules. This synergy significantly mitigates the impact of seam diffraction interference.

Recent progress in Pancharatnam–Berry phase optical elements and the applications for virtual/augmented realities

Pancharatnam–Berry optical elements for head-up and near-eye displays [Invited]

Two-dimensional Optical Edge Detection Based on Pancharatnam-Berry Phase Metasurface

Wide Field-of-view Waveguide Coupling Metasurfaces Used on Augmented Reality System

Beam Manipulations With Compact Planar Dielectric Pancharatnam–Berry Phase Devices

Pancharatnam–Berry Phase Reversal Via Opposite-Chirality-coexisted Superstructures

Colorful multi-plane augmented reality display with dynamically tunable reflective Pancharatnam-Berry phase lens

Liquid Crystal Polarization Volume Gratings and Their Applications in Augmented Reality Waveguide Displays

Nonreciprocal Pancharatnam-Berry Metasurface for Unidirectional Wavefront Manipulation

40.3: Polarization‐dependent Binocular Waveguide Display with Patterned Cholesteric Liquid Crystal Optics

Planar liquid crystal polarization optics for near-eye displays

Self-interference Polarisation Pantographer Method to Fabricate Pancharatnam-Berry Phase Optical Elements

Practical Chromatic Aberration Correction in Virtual Reality Displays Enabled by Cost‐Effective Ultra‐Broadband Liquid Crystal Polymer Lenses

Simultaneous Circular Dichroism and Wavefront Manipulation with Generalized Pancharatnam-Berry Phase Metasurfaces

Liquid-crystal-based diffractive optical elements with high Pancharatnam-Berry phase accuracy for holographic displays fabricated using an optimized liquid crystal on silicon device

All-metallic high-efficiency generalized Pancharatnam–Berry phase metasurface with chiral meta-atoms

Dynamic Polarization Patterning Technique for High-Quality Liquid Crystal Planar Optics

Gradient polarization volume grating with wide angular bandwidth for augmented reality

On-chip optical wavefront shaping by transverse spin induced Pancharatanam-Berry phase

Recent Advances in Planar Optics-Based Glasses-Free 3D Displays

Ultra-Dispersive Anomalous Diffraction From Pancharatnam-Berry Metasurfaces