Understanding the molecular mechanism of pulse current charging for stable lithium-metal batteries

Qi Li,Shen Tan,Linlin Li,Yingying Lu,Yi He

DOI: https://doi.org/10.1126/sciadv.1701246

IF: 13.6

2017-07-07

Science Advances

Abstract:Pulse current charging stabilizes high-energy lithium-metal batteries.

multidisciplinary sciences

What problem does this paper attempt to address?

Study on Charging Characteristics of Li-ion Battery Using High-current Pulse Charging Method

MA Jin-hong,WANG Zheng-shi,SU Xiu-rong

DOI: https://doi.org/10.13234/j.issn.2095-2805.2013.1.30

2013-01-01

Abstract:The high-current pulse charging method is introduced as one of the quick and high efficiency charging methods. Through a great number of tests, the Li-ion battery can be charged faster and the charging efficiency improved observably compared to the constant-current charging method. In addition, on the basis of experiments, the effects of different pulse time and charging current on charge result were analyzed, thus the optimal pulse charging parameters were proposed.
Pulsed Current Boosts the Stability of the Lithium Metal Anode and the Improvement of Lithium-Oxygen Battery Performance

Jianli Zhang,Zhenkai Zhou,Yang Wang,Qiang Chen,Guangya Hou,Yiping Tang

DOI: https://doi.org/10.1021/acsami.2c15347

2022-10-30

Abstract:Lithium-oxygen batteries have received extensive attention due to their high theoretical specific capacity, but problems such as high charging overpotential and poor cycling performance hinder their practical application. Herein, a pulsed current, which merits its relaxation phenomenon, is applied during the charging cycle to address the abovementioned problems. Pulsed charging can not only reduce the charging overpotential, but also control the mass transfer and distribution of lithium ions. As...

materials science, multidisciplinary,nanoscience & nanotechnology
Unravelling the Mechanism of Pulse Current Charging for Enhancing the Stability of Commercial LiNi0.5Mn0.3Co0.2O2/Graphite Lithium‐Ion Batteries

Jia Guo,Yaolin Xu,Moritz Exner,Xinrong Huang,Yongchun Li,Yanchen Liu,Hui Wang,Julia Kowal,Qi Zhang,Peter Kjær Kristensen,Deyong Wang,Kjeld Pedersen,Leonid Gurevich,Daniel‐Ioan Stroe,Philipp Adelhelm

DOI: https://doi.org/10.1002/aenm.202400190

IF: 27.8

2024-03-15

Advanced Energy Materials

Abstract:Pulse current charging results in more homogeneous Li‐ion distribution in graphite, reduces the crystal structural distortion and particle cracking of LiNi0.5Mn0.3Co0.2O2 (NMC532), and suppresses the secondary electrolyte decomposition, substantially enhancing the cycle stability of NMC532/graphite Li‐ion batteries. The key to advancing lithium‐ion battery (LIB) technology, particularly with respect to the optimization of cycling protocols, is to obtain comprehensive and in‐depth understanding of the dynamic electrochemical processes during battery operation. This work shows that pulse current (PC) charging substantially enhances the cycle stability of commercial LiNi0.5Mn0.3Co0.2O2 (NMC532)/graphite LIBs. Electrochemical diagnosis unveils that pulsed current effectively mitigates the rise of battery impedance and minimizes the loss of electrode materials. Operando and ex situ Raman and X‐ray absorption spectroscopy reveal the chemical and structural changes of the negative and positive electrode materials during PC and constant current (CC) charging. Specifically, Li‐ions are more uniformly intercalated into graphite and the Ni element of NMC532 achieves a higher energy state with less Ni─O bond length variation under PC charging. Besides, PC charging suppresses the electrolyte decomposition and continuous thickening of the solid‐electrolyte‐interphase (SEI) layer on graphite anode. These findings offer mechanistic insights into Li‐ion storage in graphite and NMC532 and, more importantly, the role of PC charging in enhancing the battery cycling stability, which will be beneficial for advancing the cycling protocols for future LIBs and beyond.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,energy & fuels
Beyond Constant Current: Origin of Pulse-Induced Activation in Phase-Transforming Battery Electrodes

Haitao D. Deng,Norman Jin,Peter M. Attia,Kipil Lim,Stephen D. Kang,Nidhi Kapate,Hongbo Zhao,Yiyang Li,Martin Z. Bazant,William C. Chueh

DOI: https://doi.org/10.1021/acsnano.3c09742

IF: 17.1

2024-01-09

ACS Nano

Abstract:Mechanistic understanding of phase transformation dynamics during battery charging and discharging is crucial toward rationally improving intercalation electrodes. Most studies focus on constant-current conditions. However, in real battery operation, such as in electric vehicles during discharge, the current is rarely constant. In this work we study current pulsing in Li(X)FePO(4) (LFP), a model and technologically important phase-transforming electrode. A current-pulse activation effect has...

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
Bipolar Pulse Current Charge Method for Inhibiting the Formation of Lithium Dendrite

Chen Ling,Li Xue-Li,Zhao Qiang,Cai Wen-Bin,Jiang Zhi-Yu

DOI: https://doi.org/10.3866/pku.whxb20060924

2006-01-01

Acta Physico-Chimica Sinica

Abstract:A bipolar pulse current charge method was developed to charge lithium metal electrode in 1 mol . L-1 LiPF6 / ethylene carbonate (EC):dimethyl carbonate (DMC) (1:1, V/V) electrolyte. The surface variations of lithium electrode during charge processes were investigated by in situ optical microscopic observation and impedance measurement. It was observed that lithium dendrites formed on lithium electrode during direct current (DC) charge process, but it was inhibited by bipolar pulse charge method. The results of the impedance measurement show that the surface area increases much slower in bipolar pulse current charge process than that in DC charge process. This technique may be useful for the rechargeable lithium battery.
Pulse current charging strategy towards high performance of lithium-oxygen batteries

Teng Xiao,Zhenkai Zhou,Hui Cao,Jianli Zhang,Qiang Chen,Guangya Hou,Huazhen Cao,Ming Wen,Yiping Tang

DOI: https://doi.org/10.1016/j.surfin.2021.101106

IF: 6.2

2021-06-01

Surfaces and Interfaces

Abstract:Large overpotential and poor cyclability are the main constraints for lithium-oxygen batteries (LOBs), which are usually related to the slow decomposition of the discharge product during oxygen evolution reaction (OER) of charging process. In this paper, a novel method of pulse current charging is developed for solving these problems. The results show, compared with the normal constant current samples, when duty cycle is 50% and frequency is 1 Hz and, the overpotential decreases up to 25% and the cycle life improves more than 4 times. During charging process, pulse current can reduce the concentration polarization and promote the decomposition of Li2O2, and increase the reaction kinetics of OER process, leading to the reduction of overpotential and improvement of electrochemical performance.

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
A Pulse Heating Method Without Capacity Reduction for Lithium-ion Batteries

Guoliang Wu,Yankong Song,Chao Lyu,Weilin Luo,Yi Sheng,Lixin Wang

DOI: https://doi.org/10.1109/iciea.2019.8833949

2019-01-01

Abstract:A heating method for lithium-ion battery is studied based on a simplified first principle electrochemical model. The criterion for avoiding lithium deposition is converted into current constraints under different temperature and state of charge. An experimental platform with closed-loop pulse current control function is built, by using of which, the effectiveness of the heating strategy is verified through heating a 18650 cylindrical LiFePO4 battery 100 times. The results show that no capacity fading is observed.
Effect of pulse-current-based protocols on the lithium dendrite formation and evolution in all-solid-state batteries

V. Reisecker,F. Flatscher,L. Porz,C. Fincher,J. Todt,I. Hanghofer,V. Hennige,M. Linares-Moreau,P. Falcaro,S. Ganschow,S. Wenner,Y.-M. Chiang,J. Keckes,J. Fleig,D. Rettenwander

DOI: https://doi.org/10.1038/s41467-023-37476-y

IF: 16.6

2023-04-27

Nature Communications

Abstract:Abstract Understanding the cause of lithium dendrites formation and propagation is essential for developing practical all-solid-state batteries. Li dendrites are associated with mechanical stress accumulation and can cause cell failure at current densities below the threshold suggested by industry research (i.e., >5 mA/cm 2 ). Here, we apply a MHz-pulse-current protocol to circumvent low-current cell failure for developing all-solid-state Li metal cells operating up to a current density of 6.5 mA/cm 2 . Additionally, we propose a mechanistic analysis of the experimental results to prove that lithium activity near solid-state electrolyte defect tips is critical for reliable cell cycling. It is demonstrated that when lithium is geometrically constrained and local current plating rates exceed the exchange current density, the electrolyte region close to the defect releases the accumulated elastic energy favouring fracturing. As the build-up of this critical activity requires a certain period, applying current pulses of shorter duration can thus improve the cycling performance of all-solid-solid-state lithium batteries.

multidisciplinary sciences
Fast formation of anode-free Li-metal batteries by pulsed current

Helge Sören Stein,Katarina Cicvarić,Leon Merker,Bojing Zhang,Miran Gaberšček,Fuzhan Rahmanian

DOI: https://doi.org/10.26434/chemrxiv-2023-s49kw-v2

2024-01-19

Abstract:Anode-free Li-metal batteries offer high energy density but are prone to dendrite formation during charging which can cause catastrophic failures. Ensuring dendrite-free smooth Li deposits during charging is therefore necessary. Suppressing dendrite growth can be achieved by pulsed current charging, especially during the formation cycle that largely determines the corrosion trajectory of a cell. As opposed to the constant-current technique, pulsed current techniques apply intermittently stopped current flows. This work investigates the electroplating of metallic Li onto a Cu foil current collector under constant-current and pulsed current formation protocols. In addition to smoother, less resistive electroplated metallic Li deposits and increased Coulombic efficiency, we show that by employing an optimized pulsed current formation protocol, the formation process is accelerated by a factor of 2 compared to a C/20 protocol. Finally, by employing a simple regression coupled to experimentation, we propose the pseudo-IR-drop to be used for live adjustment of pulsed current protocols i.e., individually approach each cell at all SOC during formation.

Chemistry
Effects of Pulse Charging on the Performances of Lithium-Ion Batteries

Shaoqing Li,Qiang Wu,Dan Zhang,Zhongsheng Liu,Yi He,Zhong Lin Wang,Chunwen Sun

DOI: https://doi.org/10.1016/j.nanoen.2018.11.070

IF: 17.6

2018-01-01

Nano Energy

Abstract:Gaining insight into the effects of pulse charging on the performances of energy storage devices is very important for the practical applications of triboelectric nanogenerators (TENGs). In this work, the effects of pulse charging on lithium-ion batteries (LIBs) are investigated. Energy efficiency of the pulse power source coupled with a LIB at different pulse charge voltages is examined. A peak value efficiency of 22.9% is observed at a pulse charging voltage of 8.0 V mode. All-atom classical molecular dynamics simulations suggest that the different diffusion coefficients of Li ion in electrolyte under different applied voltage may be responsible for the different energy efficiencies. Moreover, the cycle performances of the LIBs with intermittent and continuous pulse charging were also investigated. Bad cycling performance of LIBs at pulse charging modes is ascribed to the pulverization of electrode particles arising from the larger strain during cycling, which is corroborated by the software simulation. Based on these results, we further designed a better procedure by combining galvanostatic charge-discharge (GCD) mode with pulse charging mode to improve the battery performance.
Towards ultra-stable lithium metal batteries: Interfacial ionic flux regulated through LiAl LDH-modified polypropylene separator

Qi-Kai Lei,Qiang Zhang,Xue-Yan Wu,Xiao Wei,Jianan Zhang,Kai-Xue Wang,Jie-Sheng Chen

DOI: https://doi.org/10.1016/j.cej.2020.125187

IF: 15.1

2020-09-01

Chemical Engineering Journal

Abstract:Lithium metal batteries have attracted remarkable attention because of their high theoretic specific capacity and low redox potential. However, the issues, including uncontrollable dendritic formation and the highly reactive nature of Li anodes hinder the practical application of lithium metal batteries. Herein, LiAl layered double hydroxide (LiAl LDH) modified separators (LiAl ) are prepared by simply coating [LiAl2(OH)6]Cl nanoflakes onto polypropylene (PP) membranes. LiAl LDH nanoflakes with plenty of octahedral vacancies and abundant lithium ion diffusion pathways improve the ionic conductivity, surface electrolyte wettability and mechanical robustness of the separators. The modified separator promotes the interfacial lithium ionic flux, suppressing the dendrite formation and consequently increasing the cycling stability of lithium metal batteries. Even at an ultrahigh current density of 20 mA cm−2, the Li|Li symmetric batteries with the LiAl separators can be charged/discharged for more than 3000 h, demonstrating the remarkably high cycling stability. This work provides a feasible and efficient strategy for enhancing the cycling performance and safety of lithium metal batteries.

engineering, chemical, environmental
The Effect of Pulsed Current on the Performance of Lithium-ion Batteries

Xinrong Huang,Yuanyuan Li,Jinhao Meng,Xin Sui,Remus Teodorescu,Daniel-Ioan Stroe

DOI: https://doi.org/10.1109/ecce44975.2020.9235873

2020-01-01

Abstract:The pulsed current is considered to improve the performance of the Lithium-ion (Li-ion) battery. However, the effect of the pulsed current on Li-ion battery performances is inconclusive at present. In this paper, a battery cell was charged by applying a 0.05 Hz pulsed current. Different duty cycles, the current-rates (C-rates), and ambient temperatures were considered in order to obtain a clear impact of the pulsed current on the battery performance during charging. Compared with the constant current, the pulsed current can improve the charging capacity and decrease the maximum rising temperature by 30.63% and 60.3%, respectively. The results obtained were used for the parameterization of a capacity model and charging time model, which are able to express both the capacity and charging time at different charging conditions of the Li-ion battery cell.
Charge and discharge characteristics of lead-acid battery and LiFePO4 battery

A. Chih-Chiang Hua,B. Zong-Wei Syue

DOI: https://doi.org/10.1109/ipec.2010.5544506

2010-06-01

Abstract:The charge and discharge characteristics of lead-acid battery and LiFePO4battery is proposed in this paper. The purpose of this paper lies in offering the pulse current charger of higher peak value which can shorten the charging time to reach the goal of charging fast and also avoids the polarization phenomena produced while charging the voltage and current signal simultaneously, supervising whole charging course of the battery, avoiding the situation of excessive charging, and ensuring the life of battery. The hardware circuit of this pulse current charger adopts the power electronic elements for the main structure, uses Digital Signal Processor as the core of the controller, and substantially decreases the volume of charger and the loss of circuit. Besides, the input power supply of this charger is utility, greatly facilitating its using or carrying, which contributes to the development of variety of electric equipments in the future.
A Review of Pulsed Current Technique for Lithium-ion Batteries

Xinrong Huang,Yuanyuan Li,Anirudh Budnar Acharya,Xin Sui,Jinhao Meng,Remus Teodorescu,Daniel-Ioan Stroe

DOI: https://doi.org/10.3390/en13102458

IF: 3.2

2020-01-01

Energies

Abstract:Lithium-ion (Li-ion) batteries have been competitive in Electric Vehicles (EVs) due to their high energy density and long lifetime. However, there are still issues, which have to be solved, related to the fast-charging capability of EVs. The pulsed current charging technique is expected to improve the lifetime, charging speed, charging/discharging capacity, and the temperature rising of Li-ion batteries. However, the impact of the pulsed current parameters (i.e., frequency, duty cycle, and magnitude) on characteristics of Li-ion batteries has not been fully understood yet. This paper summarizes the existing pulsed current modes, which are positive Pulsed Current Mode (PPC) and its five extended modes, and Negative Pulsed Current (NPC) mode and its three extended modes. An overview of the impact of pulsed current techniques on the performance of Li-ion batteries is presented. Then the main impact factors of the PPC strategy and the NPC strategy are analyzed and discussed. The weight of these impact factors on lifetime, charging speed, charging/discharging capacity, and the temperature rising of batteries is presented, which provides guidance to design advanced charging/discharging strategies as well as to determine future research gaps.
Ion modulation engineering toward stable lithium metal anodes

Ce Wang,Jiahao Zhu,Yuhong Jin,Hao Wang,Qianqian Zhang,JingBing Liu

DOI: https://doi.org/10.1039/d3mh00403a

IF: 13.3

2023-05-16

Materials Horizons

Abstract:Homogeneous ion transport during Li+ plating/stripping plays a significant role in the stability of Li metal anodes (LMAs) and the electrochemical performance of Li metal batteries (LMBs). The controlled ion transport with uniform Li+ distribution is expected to suppress notorious Li dendrites growth while stabilizing the susceptible solid electrolyte interfacial (SEI) film and optimizing the electrochemical stability. Here, we are committed to rendering a comprehensive study of Li+ transport during the Li plating/stripping process related to the interactions between Li dendrites and SEI film. Moreover, the rational ion modulation strategies based on functional separators, artificial SEI films, solid-state electrolytes and structured anodes are introduced to homogenize Li+ flux and stabilize the lithium metal surface.Finally, the current issues and potential opportunities for ion transport regulation to boost the high energy density of LMBs are described.

materials science, multidisciplinary,chemistry
Analysis on Pulse Charging–discharging Strategies for Improving Capacity Retention Rates of Lithium-Ion Batteries

Haichao Lv,Xiankun Huang,Yongzhong Liu

DOI: https://doi.org/10.1007/s11581-019-03404-8

IF: 2.961

2020-01-01

Ionics

Abstract:The capacity fade of lithium-ion batteries (LIBs) are intimately dependent upon charging–discharging strategies. In this work, a pseudo-two-dimensional model coupled with thermal effects was developed to investigate the effects of pulse current charging–discharging strategies on the capacity fade for LIBs, in which the growth of solid electrolyte interphase (SEI) and the lithium ion migration process are highlighted. LiFePO4/graphite (LFP) batteries were taken as samples. The capacity fading processes of the LFP batteries under different pulse current charging–discharging strategies were studied by numerical simulations. The impacts of the growth of the SEI layer at the negative electrode on the capacity degradation were studied by using eleven charging–discharging cases. The results show that, compared with the constant current-constant voltage (CC-CV) strategy, the pulse current-constant voltage (PC-CV) strategies can effectively alleviate the capacity fade of the LFP batteries due to the relaxation process in the pulse charging process. Under the PC-CV strategies, the relaxation duration and the peak current were altered. The relaxation process renders the decrease of the current density of side reactions in the batteries, which is conducive to the recovery of the aged batteries, thus improving the capacity retention rates of the batteries. The advantages of the PC-CV strategies were demonstrated in this work. The results will provide theoretical guidance for the rapid charging–discharging strategies of LIBs.
Optimal Charging Strategy With Complementary Pulse Current Control of Lithium-Ion Battery for Electric Vehicles

Li Jiang,Yijia Cao,Yong Li,Yinglong Zhao,Ping Liu,Chun Huang,Yong Xu,Hui Wang,Yao Sun

DOI: https://doi.org/10.1109/TTE.2021.3097135

IF: 6.519

2022-01-01

IEEE Transactions on Transportation Electrification

Abstract:Although the pulse charging strategy has many advantages, it is still controversial. The paradox is that it prolongs the charging time to eliminate the polarization voltage by the pulse interval, and the ac component in pulse current will increase the ohmic losses. In this article, an optimal charging strategy with a complementary pulse current of lithium-ion is proposed to address and alleviate t...
Stabilizing Cathode Materials of Lithium-Ion Batteries by Controlling Interstitial Sites on the Surface

Jun-Yu Piao,Yong-Gang Sun,Shu-Yi Duan,An-Min Cao,Xue-Long Wang,Rui-Juan Xiao,Xi-Qian Yu,Yue Gong,Lin Gu,Yutao Li,Zhen-Jie Liu,Zhang-Quan Peng,Rui-Min Qiao,Wan-Li Yang,Xiao-Qing Yang,John B. Goodenough,Li-Jun Wan

DOI: https://doi.org/10.1016/j.chempr.2018.04.020

IF: 23.5

2018-01-01

Chem

Abstract:Lithium-ion batteries with high energy density are being intensively pursued to meet the ever-growing demand for energy storage. However, the increase in energy density often comes with an elevated instability of electrode materials, causing major concerns about the reliability and safety of lithium-ion batteries. Here, we report a strategy for stabilizing cathode materials by modulating the vacant lattice sites on the particle surface. Using the high-voltage Li [Ni0.5Mn1.5]O-4 as an example, we demonstrate that introduction of a 10-nm epitaxial surface layer with Al3+ in the empty 16c octahedral sites of the spinel Li[Ni0.5Mn1.5]O-4 suppresses structural degradation during cycling by increasing the surface stability without interfering with the Li+ diffusion around the Al3+ sites. Control of the Al3+ concentration in the surface region was shown to be a facile process. The process was shown to stabilize long-term cycling of Li [Ni0.5Mn1.5]O-4 to 5 V versus Li+/ Li-0.
Mechanically Robust Current Collector with Gradient Lithiophilicity Induced by Spontaneous Lithium Ion Diffusion for Stable Lean-Lithium Metal Batteries

Minjian Gong,Ruohan Yu,Cheng Zhou,Yongkun Yu,Qianmu Pan,Chenxu Dong,Chunli Shen,Yujia Guan,Congli Sun,Liqiang Mai,Xu Xu

DOI: https://doi.org/10.1021/acsnano.4c06111

IF: 17.1

2024-07-25

ACS Nano

Abstract:Lean-lithium metal batteries represent an advanced version of the anode-free lithium metal batteries, which can ensure high energy density and cycling stability while addressing the safety concerns and the loss of energy density caused by excessive lithium metal. Herein, a mechanically robust carbon nanotube framework current collector with gradient lithiophilicity is constructed for a lean-lithium metal battery. Using the physical vapor deposition method, precise prelithiation of a carbon nanotube framework is achieved, eliminating its irreversible capacity, retaining the porous structure in the framework, and inducing the gradient lithiophilicity formation due to spontaneous lithium ion diffusion. The lithiophilic gradient and three-dimensional porous structure are characterized by time-of-flight secondary ion mass spectrometry (TOF-SIMS), scanning transmission electron microscopy (STEM), and corresponding electron energy loss spectroscopy (EELS), which enables the preferential deposition of lithium ions at the bottom of the carbon nanotube framework, thereby avoiding lithium losses associated with dead lithium. As a result, in the LiFePO4 full cell with an ultralow N/P ratio of 0.15, the initial Coulombic efficiency increases from 77.75 to 95.07%. Collaborating synergistically with the ultrathin (1.5 μm) lithium metal, serving as a gradual lithium supplement, the full cell with an N/P ratio of 1.43 demonstrates an 86% capacity retention after 500 cycles at 1C, far surpassing the copper-based counterparts (0.9%).
Understanding the Molecular Mechanism of Lithium Deposition for Practical High-Energy Lithium-Metal Batteries

Nan Xu,Linlin Li,Yi He,Yang Tong,Yingying Lu

DOI: https://doi.org/10.1039/d0ta01044h

IF: 11.9

2020-01-01

Journal of Materials Chemistry A

Abstract:Interaction energy between Li and the anode substrate, the diffusion barrier of Li ion near the anode substrate, and the morphology of the substrate are found to be the critical factors to achieve uniform lithium deposition.

Understanding the molecular mechanism of pulse current charging for stable lithium-metal batteries

Study on Charging Characteristics of Li-ion Battery Using High-current Pulse Charging Method

Pulsed Current Boosts the Stability of the Lithium Metal Anode and the Improvement of Lithium-Oxygen Battery Performance

Unravelling the Mechanism of Pulse Current Charging for Enhancing the Stability of Commercial LiNi0.5Mn0.3Co0.2O2/Graphite Lithium‐Ion Batteries

Beyond Constant Current: Origin of Pulse-Induced Activation in Phase-Transforming Battery Electrodes

Bipolar Pulse Current Charge Method for Inhibiting the Formation of Lithium Dendrite

Pulse current charging strategy towards high performance of lithium-oxygen batteries

A Pulse Heating Method Without Capacity Reduction for Lithium-ion Batteries

Effect of pulse-current-based protocols on the lithium dendrite formation and evolution in all-solid-state batteries

Fast formation of anode-free Li-metal batteries by pulsed current

Effects of Pulse Charging on the Performances of Lithium-Ion Batteries

Towards ultra-stable lithium metal batteries: Interfacial ionic flux regulated through LiAl LDH-modified polypropylene separator

The Effect of Pulsed Current on the Performance of Lithium-ion Batteries

Charge and discharge characteristics of lead-acid battery and LiFePO4 battery

A Review of Pulsed Current Technique for Lithium-ion Batteries

Ion modulation engineering toward stable lithium metal anodes

Analysis on Pulse Charging–discharging Strategies for Improving Capacity Retention Rates of Lithium-Ion Batteries

Optimal Charging Strategy With Complementary Pulse Current Control of Lithium-Ion Battery for Electric Vehicles

Stabilizing Cathode Materials of Lithium-Ion Batteries by Controlling Interstitial Sites on the Surface

Mechanically Robust Current Collector with Gradient Lithiophilicity Induced by Spontaneous Lithium Ion Diffusion for Stable Lean-Lithium Metal Batteries

Understanding the Molecular Mechanism of Lithium Deposition for Practical High-Energy Lithium-Metal Batteries