Abstract:Good structural performance and reliability are two key objectives in design of wind turbine blade. To improve the natural frequency of blades to avoid resonance effectively, but it also increases the weight and direct manufacturing cost of blades. To achieve the best trade-off between mass and first-order frequency of blades, this paper presents a method of structural optimization based on multi-objective genetic algorithm NSGA-II. A small wind turbine blade is taken as case study. The CFD computation is performed to obtain the aerodynamic load, and the FEM is applied to obtain structure responses. With the weight minimization and the first-order frequency maximization of the blade as two goals, the optimization model is constructed and the Pareto solution set of two goals is obtained. Compared with original scheme, the weight of the optimized blade is reduced by about 15%. On the premise of avoiding blade resonance, the solution with the weight as light as possible is selected as the design scheme. The delamination failure, buckling failure, strength failure, and other failure modes of the blade with thin airfoil are analyzed, and the results show that the delamination failure and buckling failure of the blade can be ignored temporarily. Time-varying wind speed and some mechanical parameters of composite materials are taken as random input variables. The reliabilities of the design scheme with multiple failure modes are evaluated, and the reliability sensitivity is analyzed by combining FEM, BP neural network method and Monte Carlo Simulation (MCS) method. The results show that wind speed and longitudinal elastic modulus of uniaxial fiberglass are critical influence factors for affecting reliabilities of the blade. Meanwhile, the results can also provide some references about the timing of shutting down wind turbines and the selection of composite materials.

Design Optimization of Composite Prosthetic Tubes Using GA-ANN Algorithm Considering Tsai-Wu Failure Criteria

Genetic Algorithm-Based Optimization of the Thin-Walled Tube of High Strength Aluminum Alloy in Diamond Turning Process

Design and Optimization of Variable Stiffness Composite Cylinders with the Consideration of Manufacturing Interaction

Multi-objective parametric optimization of a composite high-performance prostheses using metaheuristic algorithms

Multiple-scale Uncertainty Optimization Design of Hybrid Composite Structures Based on Neural Network and Genetic Algorithm

Design optimization of laminated composite structures using artificial neural network and genetic algorithm

Strength-constrained simultaneous optimization of topology and fiber orientation of fiber-reinforced composite structures for additive manufacturing

Progressive failure analysis and taguchi-based optimisation of filament-wound composite tubes subjected to internal pressure using continuum damage mechanics approach

Multiple objective crashworthiness optimization of circular tubes with functionally graded thickness via artificial neural networks and genetic algorithms

Topology optimization considering Tsai–Wu yield criterion for composite materials

Finite Element Analysis of Composite Frames in Wheelchair under Upward Loading

A Optimization Technique for the Composite Strut Using Genetic Algorithms

Determining the best practice – Optimal designs of composite helical structures using Genetic Algorithms

Optimization of the structural system with composite beam and composite slab using Genetic Algorithm

Multi-Objective Robust Design Optimization for Crashworthiness Enhancement of Hybrid 2D Triaxially Braided Composite Tube Using Evolutionary Algorithms

A topology, material and beam section optimization method for complex structures

An Efficient Optimization Method for Stacking Sequence of Composite Pressure Vessels Based on Artificial Neural Network and Genetic Algorithm

Topology optimization of degradable composite structures with time‐changeable stiffness

High-performance design of auxetic sandwich structures: A multi-objective optimization approach

Optimal design of laminates orientation in a composite material by genetics algorithm and simulated annealing

Structural Optimization and Influence Factors on Reliability for Composite Wind Turbine Blade