Abstract:Kinetic Poppe plots for small retained compounds were calculated in HPLC (using pure acetonitrile) and SFC (using pure carbon dioxide) for columns having twenty one different lengths (between 3 cm and 30 m), operated under strict adiabatic conditions (no heat exchange was allowed between the column and the external environment), with a constant pressure drop of 200 bar. The outlet pressures were set at 1 and 160 bar in HPLC and SFC, respectively. The eluent inlet temperature was set at 312 K. The hold-up time t0 and the apparent column efficiency <N> were calculated by taking into account the longitudinal variations of the eluent pressure, its temperature, density, viscosity, heat capacity, thermal expansion coefficient, equilibrium constant, and diffusion coefficient along the column length. Three different classes of stationary phase were considered: fully porous particles and core-shell particles of different diameter and structure, and silica monolithic columns of the second generation. The reduced plate heights of these stationary phases were taken from experimental data obtained with liquid eluents (acetonitrile/water mixtures). The columns were assumed to be radially homogeneous. The Henry's constant of the compound was fixed at Ka=2.0 at the column inlet. The results demonstrate the potential advantage of using sub-3 μm core-shell particles for fast analysis in both LC and SFC, regardless of the intra-particle diffusivity through the stationary phase. In RPLC conditions, the contribution of surface diffusion to intra-particle diffusivity is important and the 4.6 μm core-shell particles can perform as well as sub-2 μm fully porous particles and silica monolithic columns of the second generation. In the absence of surface diffusion or for localized adsorption onto the stationary phase, sub-2 μm particles and silica monolithic column of the second generation outperform the 4.6 μm core-shell particles because the solid-liquid mass transfer resistance controls the column efficiency at high speeds. Eventually, for the same stationary phase and speed of analysis, SFC methods using pure CO2 may provide at least a twice column efficiency than LC methods using pure acetonitrile. For a constant pressure drop and resolution power, SFC methods may generate four times faster analyses than LC methods. Ultimately, a standard commercial 4.6mm × 50mm long column packed with 2.6 μm core-shell particles, operated with an inlet flow rate of 25 mL/min in fast SFC (200 bar back pressure, 40 °C) may provide a hold-up time of about 1s requiring data acquisition at a frequency of 400 Hz, with a variance of 0.35 μL(2). This performance will require the use of new, ultra-low dispersion SFC system.

Surface Diffusion of Aromatic Hydrocarbon Analytes in Reversed-Phase Liquid Chromatography

Solvent Diffusion in Silica/Poly[Styrene-Co-(Acrylic Acid)] Core-Shell Microspheres by Pulsed Field Gradient Nmr Techniques

Insights from molecular simulations about dead time markers in reversed-phase liquid chromatography

Destructive stationary phase gradients for reversed-phase/hydrophilic interaction liquid chromatography

Preparation and characterization of stationary phase gradients on C8 liquid chromatography columns

Preparation and investigation of two-component silica-modified hydrophobic layer for minimizing retention loss of reversed-phase chromatographic columns using fully aqueous mobile phases

Understanding retention and intra-particle diffusivity of alkylsulfobetaine-bonded Ethylene Bridged Particles with different mesopore sizes for hydrophilic interaction liquid chromatography applications

Changes in the Cis-Trans Isomer Selectivity of a Reversed-Phase Liquid Chromatography Column During use with Acidic Mobile Phase Conditions

Investigation of the Concentration Dependence of Mass Transfer Coefficients in Reversed-Phase Liquid Chromatography

Retention prediction of highly polar ionizable solutes under gradient conditions on a mixed-mode reversed-phase and weak anion-exchange stationary phase

Molecular simulation of concurrent gas-liquid interfacial adsorption and partitioning in gas-liquid chromatography

Kinetics of transfer of volatile amphiphiles (fragrances) from vapors to aqueous drops and vice versa: Interplay of diffusion and barrier mechanisms

Investigation of Quantitative Relationship Between Adsorbed Amount of Solute and Solvent Concentration at Relatively High Solute Concentration by Frontal Analysis in RPLC

Reversed-Phase HPLC on Monomeric Reversed Phases: Factors Determining Adsorbate Retention

Probing Molecular Dynamics In Chromatographic Systems Using High-Resolution H-1 Magic-Angle-Spinning Nmr Spectroscopy: Interaction Between P-Xylene And C18-Bonded Silica

Investigation of interfacial mass transfer phenomena applying non-invasive Raman imaging and density gradient theory

The secret of reversed-phase/weak cation exchange retention mechanisms in mixed-mode liquid chromatography applied for small drug molecule analysis

Limit of the speed-resolution properties in adiabatic supercritical fluid chromatography

All-atom Molecular Dynamics Simulation of Protein Separation Process by Reverse Phase Liquid Chromatography

Features and Advantages of the Recurrent Approximation of Retention Times in Reversed-Phase High-Performance Liquid Chromatography

Impact of surface diffusion on transport through porous materials