Abstract:In this paper, the competing requirements of material strength, casting formation and residual stress are considered in the design of a large bulkhead integral isothermal forging die using a design approach that incorporates an outer ring plus a die body. Thermal stress assembly was conducted to resolve the various manufacturing issues encountered in the production of this large-scale casting. This paper also proposes a design method for an expansion joint and material-saving holes to homogenize the cross-sectional thickness of the casting die by solving problems associated with defects and hot cracking during the casting process. The finite element method was used based on the equivalent liquid level descending method, the Niyama criterion, etc., to analyze the pouring of the sand model with different risers to choose the casting process. To resolve the occurrence of hot cracks during production, the design was optimized and the process was improved in combining with the simulation analysis result, after which carrying out another finite element analysis and by re-verifying the production process again. The results show that the simulated porosity, shrinkage and stress distribution are in accord with the practical production status. Based on the mechanical properties and a microstructure analysis, the tension strength of the K3 casting die at 950 °C is approximately 635 MPa, and the microstructures are typical dendrites. However, through the simulation, practical production, and analysis of the mechanical properties and microstructure, the die design method proposed in this paper offers benefits in solving casting forming problems and hot cracking of an integral oversized titanium bulkhead casting die, and a K3 superalloy die with a weight of 7.8 tons was successfully cast.

Precision Casting of GTD222 Component with Complex Thin-Wall Structure

Data-Driven Design of Cast Nickel-Based Superalloy and Precision Forming of Complex Castings

Research progress on dimensional accuracy control technologies of complex thin-walled superalloy investment castings for aero-engines

Application Research of Centrifugal Investment Cast TiAl Component Used for Advanced Aircraft Engine

Microstructures and Mechanical Properties of GTD222 Superalloy Fabricated by Selective Laser Melting

Progress of the Counter Gravity Casting Technology in the Superalloy Large Complicated Thin-Walled Castings

Recent advances on precision casting of large thin wall complex castings of titanium alloys

Physical Simulation of Investment Casting for GTD-222 Ni-based Superalloy Processed by Controlled Cooling Rates

Casting Design Optimization Using Numerical Simulation of Precision Forging Die for Large Titanium Alloy Integral Bulkhead

Effect of centrifugal casting process on mold filling and grain structure of K418B turbine guide

Novel in situ synthesized carbide reinforced Ni base composite for structural castings with high creep resistance

Technology and Development of Large Thin-wall Investment Superalloy Casting

Research Progress on Theory and Technology Concerning Precision Forming of Titanium Alloy Castings

Numerical Simulation and Optimization of Investment Casting for Complex Thin-walled Castings

Effect of Process Parameters on the Mechanical Properties and Microstructure of Large-Sized Aluminum Alloy Parts with Complex Shape Formed by Squeeze Casting

Simulation of Fine Grain Casting Process of Superalloy K4202 by Thermal Control Method

Investment Casting Technology and Development Trend of Superalloy Ultra Limit Components

Novel Cast Ni‐based Superalloys with Superb Weldability and Mechanical Properties Screened by a Multi‐Performance‐Oriented Criterion

Microstructure and mechanical properties of TiAl castings produced by zirconia ceramic moulds

Present Research Situation And Prospect Of Hot Working Of Cast & Wrought Superalloys For Aero-Engine Turbine Disk In China