Abstract:The dynamics of dilute micron-sized spherical inertial particles in turbulent duct flows is studied by means of direct numerical simulations of the carrier phase turbulence with one-way coupled Lagrangian particles. The geometries are a square and a rectangular duct with width-to-height aspect ratio $AR$ of 3 operating at $Re_{\tau,c}=360$ . The present study is designed to determine the effect of turbulence-driven secondary motion on the particle dynamics. Our results show that a weak cross-flow secondary motion significantly changes the cross-sectional map of the particle concentration, mean velocity and fluctuations. As the geometry of the duct is widened from $AR=1$ to 3, the secondary vortex on the horizontal wall significantly expands in the spanwise direction, and although the kinetic energy of the secondary flow increases close to the corner, it decays towards the duct centreplane in the $AR=3$ case so as the turbulent carrier phase approaches the behavior in spanwise-periodic channel flows, a fact that significantly affects the particle statistics. In the square duct the particle concentration in the viscous sublayer is maximum at the duct centreplane, whereas the maximum is found closer to the corner, at a distance of $|z/h|\approx1.25$ from the centreplane, in the $AR=3$ case. Interestingly the centreplane concentration in the rectangular duct is around 3 times lower than that in the square duct. Moreover, a second peak in the accumulation distribution is found right at the corners for both ducts. At this location the concentration increases with particle inertia. The secondary motion changes also the cross-stream map of the particle velocities significantly in comparison to the fluid flow statistics. These directly affect the particle velocity fluctuations such that multiple peaks appear near the duct walls for the particle streamwise and wall-normal velocity fluctuations.

Application of 1D Models to Particle Transport in a Duct of Rectangular Cross Section

Analytical Discrete-Ordinates Solutions for Improved 1D Models of Particle Transport in Ducts with Wall Migration

Approximate One-Dimensional Models for Monoenergetic Neutral Particle Transport in Ducts with Wall Migration

Effects of Finite-Size Heavy Particles on the Turbulent Flows in a Square Duct

Using the discrete element method to develop collisional dissipation rate models that incorporate particle shape

Particle Transport in a 3D Duct by Adding and Doubling

CFD–DEM Simulation of Pneumatic Conveying in a Horizontal Channel

Modeling particle deposition onto rough walls in ventilation duct

Aspect ratio effect on particle transport in turbulent duct flows

Numerical simulation of cylinder orientation through a rotating straight expansion duct

Two-dimensional turbulent model and its numerical calculation for gas-particle flow in a vertical duct

Particle deposition in turbulent duct flows—comparisons of different model predictions

Numerical study of deposition rates of monodisperse particles in curved pipes with different expansion or shrinkage variables

Numerical Simulation of Turbulent Structure and Particle Deposition in a Three-Dimensional Heat Transfer Pipe with Corrugation

Modeling particle deposition from fully developed turbulent flow in ventilation duct

Simulation of Turbulent Flow Structure and Particle Deposition in a Three-Dimensional Heat Transfer Duct with Convex Dimples

A hybrid finite element approach to modeling sound radiation from circular and rectangular ducts

Particle transport in turbulent square duct flows with a free surface

On Modeling the Sound Propagation Through a Lined Duct with a Modified Ingard-Myers Boundary Condition

DNS of transitional and turbulent flows in rectangular ducts

CFD simulation of particle deposition in a horizontal turbulent duct flow