Abstract:This paper proposes a small coal pillar composite reinforcement support technology with 'two‐way buttressing anchor cable for pressure reinforcement + steel pipe concrete pier column + overhead roof break'. This comprehensive support technology of small coal pillar is proposed to solve the long‐term stability of those coal pillars under the influence of mining, ensure the feasibility of the double roadway layout technology with small coal pillars, maximising the mining efficiency. To solve the problem of controlling the stability of small coal pillars under the mining disturbance of the adjacent working face, the fourth panel 403 and 404 working faces of the Gaojiabao coal mine with two mining roadways is taken as the object of this research. The comprehensive research method of combining mechanical theory analysis, coal dynamic disturbance experiments and field engineering practice was adopted. First, the analysis determined the magnitude and frequency of fracture‐related disturbance loading on the overburden roof of the working face; next, the strain and stress threshold indicators of the coal body, sensitive to the external disturbance load of 103 J magnitude (continuous disturbance deformation), were tested and obtained through a self‐developed rock creep disturbance experimental system, and the stress threshold indicators of coal body specimens sensitive to creep disturbance were defined as the long‐term strength. Then, a coal pillar‐roof mechanics structure model was established in the premining and postmining areas of the working face, and the overlying support pressure on the coal pillar body was analysed. Finally, a small coal pillar composite reinforcement support technology with 'two‐way buttressing anchor cable for pressure reinforcement + steel pipe concrete pier column + overhead roof break' was designed to ensuring that the coal pillar body would not be destabilised by cumulative disturbance and large deformation under disturbance. According postmining area support capacity calculations, the support loading acting on the coal pillar is approximately 17593 kN, with the stress being 2.93 MPa; and the factor of safety is approximately 1.23. After engineering practice application of this approach, the vertical deformation of the small coal pillar body and side heave disturbance deformation were effectively controlled during the working face mining disturbance, the vertical deformation of the reinforced coal pillar was only 187 mm, and the side heave deformation was finally stabilised at approximately 124 mm, which maintained good stability.

A Case Study on Large Deformation Failure Mechanism of Coal given Chamber and Invention of a New Wall-Mounted Coal Bunker in Xiashijie Coal Mine with Soft, Swelling Floor Rock

Large-Deformation Failure Mechanism of Coal-Feeder Chamber and Construction of Wall-Mounted Coal Bunker in Underground Coal Mine with Soft, Swelling Floor Rocks

Research on the Mechanism and Control Technology of Coal Wall Sloughing in the Ultra-Large Mining Height Working Face

Failure Mechanism and Control Technology of Thick and Soft Coal Fully Mechanized Caving Roadway under Double Gobs in Close Coal Seams

Floor Heave Mechanism and Control Technique of Water‐Rich Soft‐Rock Roadway in Thick Coal Seam

Failure analysis and control mechanism of gob-side entry retention with a 1.7-m flexible-formwork concrete wall: A case study

Key Technique Study of Stability Control of Surrounding Rock in Deep Chamber with Large Cross-Section: A Case Study of the Zhangji Coal Mine in China

Large Deformation Mechanism and Three-Level Control Technology of Entry Retaining in Three-Soft Thick Coal Seams

Physical modeling of floor failure above confined water: a case study in China

Mechanism and Control of Asymmetric Floor Heave in the Gob-Side Coal Roadway under Mining Pressure in Extra-Thick Coal Seams

Floor heave mechanism for gob-side entry retaining with concrete blocks and control method: A case study

Physical Experiment and Numerical Modeling on the Failure Mechanism of Gob-Side Entry Driven in Thick Coal Seam

Characteristics of overlying strata and mechanisms of arch beam failure in shallowly buried thick bedrock coal seams: A case study in western China

Assessment of pillar stability and its control in a double roadway layout

A New Gob-Side Entry Retaining Approach with Reinforced Filling Gangue Wall in Thin Coal Seam

A Three-Dimensional Supporting Technology, Optimization and Inspiration from a Deep Coal Mine in China

An innovative approach for gob‐side entry retaining in deep coal mines: A case study

The Floor Heave Mechanism and Control Technology of Gob-Side Entry Retaining of Soft Rock Floor

Optimization of small coal pillar width and control measures in gob-side entry excavation of thick coal seams

Predictive model for the instability of flexible formwork concrete wall in secondary mining of non-pillar coal mining

Abnormal ore pressure mechanism of working face under the influence of overlying concentrated coal pillar