Abstract:During the exploitation of deep coal resources, the gas hazard becomes increasingly significant, severely threatening the high-quality development of the coal industry and the occupational safety and health of miners. Coal seam water injection is underground coal mines' most commonly used dust control measure. Additionally, it is an effective method for preventing localized coal and gas outburst hazards. After injecting water into the coal seam, spontaneous imbibition causes the retained water in the fractures to migrate under capillary action and widely distribute the water within the coal seam, which enhances the wetting degree of the coal by water and the effectiveness of gas prevention. To reveal the migration characteristics of water in the coal during spontaneous imbibition and its impact on gas control, a self-developed gas-bearing coal spontaneous imbibition system was used to conduct isobaric water injection imbibition and gas desorption experiments on gas-bearing coal samples. The results showed that after the water was injected into the coal sample, it migrated from bottom to top under capillary action, resulting in three stages of abrupt, rapid, and gradual changes in the electrical resistivity of different layers of the coal sample over time. The migration distance of water increased with the imbibition time, but the rate of increase gradually decreased. The compaction load increase reduced the coal sample's average pore size, resulting in faster water migration speed. After imbibition, the water content decreased gradually from bottom to top along the axial direction and showed a non-uniform distribution in the radial direction. During imbibition, the water displaced gas within the coal sample, and the amount of gas displaced increased with the imbibition time. Increasing the amount of water injected and the coal sample compacted load can promote water migration within the coal, expanding the wetted area and displacing more gas. After imbibition, due to the displaced gas being released and the water-lock effect, the atmospheric gas desorption amount of the coal sample decreased with an increase in the amount of water injected, following a modified power function relationship. When the amount of water injected into the coal sample was low, increasing the water-injected amount could significantly reduce the gas desorption expansion energy of the coal sample. However, this trend became less apparent as the amount of water injected continued to increase. To improve the effectiveness of coal seam water injection in preventing gas outburst hazards, it is recommended to carry out water injection operations as early as possible to expand the wetted area of the coal seam and to add gas drainage holes to prevent increased coal body outburst tendencies due to local gas pressure rise in the coal seam.

Time Effect of Water Injection on the Mechanical Properties of Coal and Its Application in Rockburst Prevention in Mining

Effect of Saturation Time on the Coal Burst Liability Indexes and Its Application for Rock Burst Mitigation

Microstructural Evolution and Damage Mechanism of Water-Immersed Coal Based on Physicochemical Effects of Inorganic Minerals

Experimental and numerical investigation on failure characteristics and mechanism of coal with different water contents

A Feasibility Study of Coal Seam Water Injection Processes: The Effects of Coal Porosity and Mass Flow Rates of Injected Water on Wetting Radii

Macroscopic and microscopic mechanical behavior and seepage characteristics of coal under hydro-mechanical coupling

Water Injection Into Coal Seams for Outburst Prevention: The Coupling Effect of Gas Displacement and Desorption Inhibition

Research on dust and rockburst control technology for coal mining and mathematical correlation

Study on the water transport characteristics during spontaneous imbibition and its impact on gas desorption

Study on Permeability Enhancement of Seepage–Damage Coupling Model of Gas-Bearing Coal by Water Injection

Imbibition behavior of water on coal surface and the impact of surfactant

Numerical Simulation of Combined Water Injection in Deep Coal Seam and Its Field Application for Dust Suppression and De-stressing: A Case Study at Dongtan Coal Mine, China

Water-immersion softening mechanism of coal rock mass based on split Hopkinson pressure bar experiment

Effect of water intrusion on the characteristics of surface morphology and pore fracture spaces in argillaceous meagre coal

Study on the infiltration mechanism of injecting chelating agent into deep low permeable coal seam

Effect of Water Invasion on Outburst Predictive Index of Low Rank Coals in Dalong Mine

Anisotropic Damage Mechanism of Coal Seam Water Injection with Multiphase Coupling

Influence of the injected water on gas outburst disasters in coal mine

Influence characteristics and macro-meso mechanism of pressure immersion time on tensile properties for coal materials

Progressive Damage Characteristic and Microscopic Weakening Mechanism of Coal Under Long-Term Soaking

The Influence of the Injected Water on the Underground Coalbed Methane Extraction