Preparation of branched Al 2 O 3 and its synergistic effect with carbon nanotubes on the enhancement of thermal conductive and electrical insulation properties of silicone rubber composites
Yuge Ouyang,Zongxian Yang,Tianyang Long,Huafeng Tian,Liuyang Bai,Xiaofei Li,Fangli Yuan
DOI: https://doi.org/10.1016/j.mtcomm.2022.105239
IF: 3.8
2022-12-28
Materials Today Communications
Abstract:With the increasing demand for thermal management materials in the highly integrated electronics fields, it is great significant to develop next-generation thermal conductive yet electrically insulating composites to efficiently solve "hot spot" problems. Herein, based on sintering mass transfer of particles, branched Al 2 O 3 (B-Al 2 O 3 ) are prepared by calcinating spherical Al 2 O 3 , and then are introduced into silicon rubber (SiR) matrix with CNTs to fabricate SiR composites. The B-Al 2 O 3 fillers are overlapped with each other through branched structures, while CNTs with a high aspect ratio contribute to construct a more continuous thermal conductive network effectively by bridging B-Al 2 O 3 in the composites. The SiR composite exhibits a higher thermal conductivity of 1.307 W·m −1 ·K −1 with 20 vol% B-Al 2 O 3 and 0.5 wt% CNTs, which is also higher than that of SiR incorporated with 37 vol% B-Al 2 O 3 . Meanwhile, the electrically insulation of the SiR composites is not damaged due to the addition of a small amount of CNTs, which shows high volume resistivity of 10 15 Ω·cm. Furthermore, the SiR composites possess elevated flexibility, tensile strength, Young's modulus and fracture toughness. Our findings provide a practical route to produce polymer composites with high thermal conductivity and excellent electrically insulation performance for thermal management applications in advanced electronic devices.
materials science, multidisciplinary