Abstract:New measurements are reported for the isochoric heat capacity of the ionic liquid substance 1-hexyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide ([C6mim][NTf2]). These measurements extend the ranges of our earlier study (Polikhronidi et al. in Phys Chem Liq 52:657, 2014) by 5 % of the compressed liquid density and by 75 K. An adiabatic calorimeter was used to measure one-phase \((C_{\mathrm{V1}})\) liquid and two-phase \((C_{\mathrm{V2}})\) liquid + vapor isochoric heat capacities, densities \((\rho _s)\), and phase-transition temperatures \((T_s)\) of the ionic liquid (IL) substance. The combined expanded uncertainty of the density \(\rho \) and isochoric heat capacity \(C_\mathrm{V}\) measurements at the 95 % confidence level with a coverage factor of \(k = 2\) is estimated to be 0.15 % and 3 %, respectively. Measurements are concentrated in the immediate vicinity of the liquid + vapor phase-transition curve, in order to closely observe phase transitions. The present measurements and those of our earlier study are analyzed together and are presented in terms of thermodynamic properties \((T_s\), \(\rho _s\), \(C_{\mathrm{V1}}\) and \(C_{\mathrm{V2}})\) evaluated at saturation and in terms of key-derived thermodynamic properties \(C_\mathrm{P}\), \(C_\mathrm{S}\), \(W_\mathrm{S}^{{\prime }}\), \(K_{\mathrm{TS}}^{{\prime }}\), \(\left( {\partial P/\partial T} \right) _{\mathrm{V}}^{\prime }\), and \(\left( {\partial V/\partial T} \right) _\mathbf{P}^{\prime })\) on the liquid + vapor phase-transition curve. A thermodynamic relation by Yang and Yang is used to confirm the internal consistency of measured two-phase heat capacities \(C_{\mathrm{V2}} \), which are observed to fall perfectly on a line as a function of specific volume at a constant temperature. The observed linear behavior is exploited to evaluate contributions to the quantity \(C_{\mathrm{V2}} = f(V, T)\) from chemical potential \(C_{{\mathrm{V}\upmu }} =-T\frac{\mathrm{d}^{{2}}\mu }{\mathrm{d}T^{2}}\) and from vapor pressure \(C_{\mathrm{VP}} =VT\frac{\mathrm{d}^{2}P_{\mathrm{S}} }{\mathrm{d}T^{2}}\). The physical nature and specific details of the temperature and specific volume dependence of the two-phase isochoric heat capacity and some features of the other derived thermodynamic properties of IL at liquid saturation curve are considered in detail.

The isobaric heat capacities and thermodynamic properties of ionic liquid 1-ethylpyridinium bis(trifluoromethylsulfonyl)imide

Molar Heat Capacity and Thermodynamic Properties of N-alklypyridinium Hexafluorophosphate Salts, [cnpy][pf6] (n=2, 3, 5)

Vaporization Thermodynamics of Pyrrolidinium, Pyridinium, and Imidazolium-Based Ionic Liquids Bearing the Bis(fluorosulfonyl)imide [FSI] and the Bis(trifluoromethylsulfonyl)imide [NTf2] Anions

Low-temperature Heat Capacity and the Thermodynamic Functions of a Novel Ether-Based Ionic Liquid 1-(2-ethoxyethyl)-3-ethylimidazolium Thiocyanate

Thermodynamic Study of 1,4-Bis(3-methylimidazolium-1-yl)butane Bis(trifluoromethylsulfonyl)imide ([C4(MIm)2][NTf2]2) from 6 to 350 K

Density, Electrical Conductivity, and Dynamic Viscosity of N-Alkyl-4-Methylpyridinium Bis(Trifluoromethylsulfonyl)Imide

Density, Dynamic Viscosity, and Electrical Conductivity of Pyridinium-Based Hydrophobic Ionic Liquids

Study on thermophysical properties for aqueous solutions of ionic liquid N-ethyl-pyridine dicyanamide [C2py][DCA]

Measurements of the Solubility Parameter and Enthalpies of Vaporization in N-alkyl-pyridinium Bis((trifluoromethyl)sulfonyl)imide ([cnpy][ntf2], N = 4,6,8) Ionic Liquid

Phase behavior and ionic conductivity in lithium bis(trifluoromethanesulfonyl)imide-doped ionic liquids of the pyrrolidinium cation and Bis(trifluoromethanesulfonyl)imide anion.

Physicochemical Properties of an Ionic Liquid [C2mim][b(cn)4]

The cohesive properties and pyrolysis mechanism of an aprotic ionic liquid tetrabutylammonium bis(trifluoromethanesulfonyl)imide

Experimental Study On The Surface Tension, Density, Viscosity And Conductivity Of Ionic Liquid 1-Ethyl-3-Methylimidazolium Bis[(Trifluoromethyl)Sulfonyl]Imide

Low-temperature Heat Capacity and Standard Thermodynamic Functions of the Novel Ionic Liquid 1-(2-methoxyethyl)-3-ethyl Imidazolium Perrhenate

Thermodynamic Properties at Saturation Derived from Experimental Two-Phase Isochoric Heat Capacity of 1-Hexyl-3-methylimidazolium Bis[(trifluoromethyl)sulfonyl]imide

Surface Tension and Density of Ionic Liquid N-Butylpyridinium Heptachlorodialuminate

Thermodynamic Properties of A New Hydrophobic Amide-Based Task-Specific Ionic Liquid [Eimch(2)conhbu][ntf2]

Low-temperature Heat Capacities and the Thermodynamic Functions of Ionic Liquids 1-Heptyl-3-methyl Imidazolium Perrhenate

Density, Viscosity, and Refractive Index of 1-Alkyl-2-methylpyrazolium Methyl Sulfate and Bis(trifluoromethylsulfonyl)imide Ionic Liquids

Study on thermodynamic properties and estimation of polarity of ionic liquids {[Cnmmim][NTf2] (n = 2, 4)}

Estimation of physico-chemical properties of ionic liquid [C7mim][BF4]