Abstract:Activated carbon (AC) fiber is a carbonaceous material with a porous structure that has a tremendous scope of application in different fields. Conventionally, AC is derived from fossil fuel-based raw materials like polyacrylonitrile (PAN) and pitch. In this work, AC was synthesized from eco-friendly, renewable, and ubiquitous jute fiber. Systematically, the jute fiber was washed and pretreated with NaOH. Raw jute and NaOH-treated jute were carbonized/pyrolyzed at 500 °C for 1 h in presence of N2 gas. The carbonized carbon was activated with H3PO4 and KOH and again pyrolyzed at 650 °C for 1.5 h maintaining the inert condition. The different features of activated carbons were characterized with field emission-scanning electron microscope, energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), X-ray diffraction (XRD), and thermogravimetric analysis. The average yield of carbonized and activated carbons was recorded at 19 and 13.8%, respectively. The scanning electron microscopic images confirmed a honeycomb-like porous structure. It was observed that KOH-activated carbon exhibited a more porous structure than the H3PO4-activated carbons. The average pore diameter of activated carbons was noted to be 1.3 μm. The pore density was higher in case of KOH-activated carbons accounting for 2.15 pore/μm. The EDX analysis showed that H3PO4-activated carbons had more than 90% carbon atoms indicating a significant carbon content. The TEM images revealed that AC particles were in the nanoscale range. The average particle sizes of H3PO4-activated carbon and KOH-activated carbon were 36.38 and 32.8 nm, respectively. The XRD study demonstrated the highly disordered and low level of crystallinity of AC. It was detected that the AC showed much higher thermal resistance than the jute fiber. The H3PO4-activated carbon obtained from NaOH-treated jute remained at 84% even after 500 °C. A higher thermal resistance was achieved with H3PO4-activated carbon since it contains 0.56% phosphorus, which was confirmed by EDX investigation. It was found that a higher carbon yield was obtained from NaOH-treated jute. The porous structure of the material showed that it could be used as an adsorbent. Due to its high thermal stability, it is recommended for flame retardants and heat insulation applications as well.

Preparation and performance comparison of cellulose-based activated carbon fibres

A COMPARATIVE STUDY OF CELLULOSE NANOWHISKERS (cnws) AND CELLULOSE NANOFIBERS (Cnfs)

Physicochemical and adsorption characteristics of activated carbons from cellulose, xylan and lignin

Preparation and Characterization of Activated Carbon Fiber (ACF) from Cotton Woven Waste

Adsorption of Volatile Organic Compounds on Activated Carbon Fiber Prepared by Carbon Dioxide

Recent trends in activated carbon fibers production from various precursors and applications—A comparative review

Preparation and characterization of flax, hemp and sisal fiber-derived mesoporous activated carbon adsorbents

Investigation on the Preparation and Adsorption Performance of Bamboo Fiber Based Activated Carbon

Adsorption characteristics of volatile organic compounds onto lyocell-based activated carbon fibers

Synthesis, Activation, and Characterization of Carbon Fiber Precursor Derived from Jute Fiber

Cellulose based hierarchically structured anion-exchange fiber for efficient dye adsorption

Activated carbon fibers from recycled acrylic and cotton for carbon dioxide capture

Sisal xylem fibre-based activated carbon fibres for fuel adsorption: effect of thermal stabilization of diammonium phosphate

Fabrication and Evaluation of Mesoporous Poly(vinyl Alcohol)-Based Activated Carbon Fibers

Preparation of activated carbon fabrics from cotton fabric precursor

Versatile Activated Carbon Fibers Derived from the Cotton Fibers Used as CO2 Solid-State Adsorbents and Electrode Materials

Preparation, characterization and adsorption performance of high surface area biomass-based activated carbons

Adsorption Property, Kinetic and Equilibrium Studies of Activated Carbon Fiber Prepared from Liquefied Wood by Zncl2 Activation

Materials for activated carbon fiber synthesis

Preparation of pitch-based activated carbon fibers with high specific surface area and excellent adsorption properties

A Preliminary Study of Extraction and Characterization of Nanocrystalline Cellulose (NCC) from Ramie Fiber