Abstract:Abstract. In the present paper, carbon nanotubes (CNTs) were synthesized by arc discharge method by vaporizing graphite rods in the presence of Ni and a Ni/Y mixture as catalysts for subsequent use in electrical energy storage and conversion devices. CNTs synthesis was carried out in a cylindrical glass reactor applying a controlled Argon flow of 1.43 cm3/min and a chamber pressure of 39 kPa. Carbon powder was collected from the reactor following chemical treatment with HCl solution at 1 M to remove the metallic impurities. Morphology obtained by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) showed multi-walled nanotubes (MWCNTs) with amorphous carbon particles attached to their surface. Fourier transform infrared (FT-IR) spectra presented bands at 1550 and 1200 cm–1 corresponding to the C=C bond characteristic to the CNTs skeleton; these bands were not present in pristine graphite. Electromagnetic absorbance was observed using ultraviolet-visible spectroscopy (UV-Vis) showing peaks at 204 and 256 nm related to sp2 hybridization characteristic for MWCNTs. Resumen. En el presente trabajo se sintetizaron nanotubos de carbono (NTCs) por el método de descarga de arco mediante la vaporización de barras de grafito en presencia de Ni y una mezcla de Ni/Y como catalizadores para su posterior uso en dispositivos de almacenamiento y conversión de energía eléctrica. La síntesis de NTCs se realizó en un reactor cilíndrico de vidrio aplicando un flujo controlado de Argón de 1.43 cm3/min y una presión de cámara de 39 kPa. El polvo de carbón se recolectó del reactor y se trató químicamente con una solución de HCl a 1 M para eliminar las impurezas metálicas. La morfología obtenida por microscopía electrónica de barrido (MEB) y microscopía electrónica de transmisión (MET) mostró nanotubos de paredes múltiples (NTCPMs) con partículas de carbón amorfo adheridas a su superficie. Los espectros de infrarrojo transformada de Fourier (FT-IR) mostraron bandas en 1550 y 1200 cm–1 que corresponden al enlace C=C característico de los NTCs; estas bandas no estuvieron presentes en el grafito prístino. La absorbancia electromagnética se observó mediante espectroscopia ultravioleta-visible (UV-Vis) mostrando picos a 204 y 256 nm relacionadas con la hibridación sp2 característica de los NTCPMs.

Carbon nanotube dispersion for in-vitro applications

Understanding Interfacial Dynamics: Hydrostatic Pressure-Induced Sono-Dispersion of Carbon Nanotubes

Dispersant Selection for Nanomaterials: Insight into Dispersing Functionalized Carbon Nanotubes by Small Polar Aromatic Organic Molecules

Dispersion of carbon nanotubes in ethanol by a bead milling process

Ultrasonic Dispersion of Multi-Walled Carbon Nanotubes Aided by Pyrene-Polyether Dispersants and Al 2 O 3 Particles

Dispersion of denatured carbon nanotubes by using a dimethylformamide solution

Mild nitric acid treatments to improve multi-walled carbon nanotubes dispersity and solubility in dielectrophoresis mediums

Free arc liquid-phase dispersion method for the preparation of carbon nanotube dispersion

Utilizing Fullerenols as Surfactant for Carbon Nanotubes Dispersions Preparation

Preparative Ultracentrifuge Method for Characterization of Carbon Nanotube Dispersions

Effects of Plasma and Acid Treatment on the Dispersion of Carbon Nanotubes in Liquids

Sonication-assisted Dispersion of Carbon Nanotubes in Aqueous Solutions of the Anionic Surfactant SDBS:The Role of Sonication Energy

Multi-walled Carbon Nanotubes Synthesis by Arc Discharge Method in a Glass Chamber

Dispersion of Single-Wall Carbon Nanotubes in Bile Salt Surfactants and Separation of Swcnts(6,5) by Aqueous Two-Phase Extraction

A Treatment Method to Give Separated Multi-Walled Carbon Nanotubes with High Purity, High Crystallization and a Large Aspect Ratio

Preparation of Long Duration Stable CNT Nanofluid Using SDS

Dispersing Single-Walled Carbon Nanotubes in Water by Adsorption of Polyphenols

Synthesis, characterization and dispersion stability of water-based Cu–CNT hybrid nanofluid without surfactant

Preparation, characterization and cellular biological impact of water soluble multiwalled carbon nanotubes

Well-established carbon nanomaterials: modification, characterization and dispersion in different solvents

Surfactant Assisted Dispersion of Single-Walled Carbon Nanotubes in Polyvinylpyrrolidone Solutions