Recycling of Tunisian Phosphogypsum as Road Material: Assessment of the Mechanical and Leaching Behavior

Raja Zmelma,Ikram Naifer,Mounir Benjdidia,Boubaker Elleuch

DOI: https://doi.org/10.1007/978-3-319-70548-4_388

2018-01-01

Abstract:At present, the growth of waste production associated with the awareness of the environmental problems and the need of a sustainable development make waste management the key disposal method

What problem does this paper attempt to address?

Environmental investigation on the use of a phosphogypsum-based road material: Radiological and leaching assessment

Sarra Meskini,Issam Mechnou,Moncef Benmansour,Toufik Remmal,Azzeddine Samdi

DOI: https://doi.org/10.1016/j.jenvman.2023.118597

2023-11-01

Abstract:The transformation of phosphate ore into phosphoric acid results in the generation of high volumes of phosphogypsum (PG), an industrial by-product largely stockpiled worldwide. This solution, considered as the least damaging to the environment, constitutes a risk for the receiving environment due to the presence of harmful impurities such as heavy metals and radionuclides which hinder its large-scale valorization. This paper presents an environmental characterization of Moroccan phosphogypsum and an investigation on the environmental performance of a new lime (L) - fly ash (FA) treated phosphogypsum based road material. The concentration of metallic trace elements (Cr, Pb, Ni, Zn, Cu) in raw phosphogypsum ranged between 0.2 and 243 ppm, while its radioactivity reached 970 Bq/kg for Ra-226. The environmental performance of the proposed new road material (40% PG, 42% FA, 18% L) was evaluated using radiological risk indices besides static and dynamic leaching tests. The results showed a radioactivity reduction up to 82%, and an immobilization of metallic trace elements ranging from 25 to 100%. The stabilization/solidification mechanisms involved in the lime - fly ash treatment would be responsible for the fixation of these contaminants within the newly formed matrix.
A phosphogypsum‐based road material with enhanced mechanical properties for sustainable environmental remediation

Raja Zmemla,Mounir Benjdidia,Ikram Naifar,Chaouki Sadik,Boubaker Elleuch,Ali Sdiri

DOI: https://doi.org/10.1002/ep.13732

2021-08-17

Abstract:An integrated approach for sustainable use of Phosphogypsum byproducts as road materials was developed. For the purpose of this study, several formulations of phosphogypsum-based material have been performed to evaluate its potential application for road base layers. Physico-chemical properties, mechanical strengths and environmental aspects were simultaneouly addressed. Both dynamic and batch leaching tests have been carried out to properly evaluate the leaching behavior of the prepared road mixture versus binder type and age of Phosphogysum used. Commonly used geotechnical tests, including compressive strength, tensile strength as well as Young's modulus have been carried out on the prepared specimen. Strength development at different curing times was studied and compared to conventional road base materials. The obtained results indicated that the 28- and 360-days strengthes reached 2200 kPa and 3500 kPa, respectively. Cement stabilized material showed higher strength values (both early age and final compressive strength) than conventional road base materials. Those encouraging properties were confirmed by XRD and SEM analyses. Further study focused on potentially toxic elements released from both original phosphogypsum (PG) and newly prepared formulations. It was found that almost all contaminants studied were significantly immobilized in the formulations with high pH values. This may offer an efficient waste disposal concomitantly whith reducing the demand for natural aggregates, therefore a significant gain in life cycle impacts and costs.. This is a low cost and handy tool for sustainable environmental remediation via the use of byproducts that have no potential threat of contaminants leaching.This article is protected by copyright. All rights reserved.

environmental sciences,green & sustainable science & technology,engineering, environmental, chemical
Phosphogypsum recycling: New horizons for a more sustainable road material application

Mustapha Amrani,Yassine Taha,Azzouz Kchikach,Mostafa Benzaazoua,Rachid Hakkou

DOI: https://doi.org/10.1016/j.jobe.2020.101267

IF: 7.144

2020-07-01

Journal of Building Engineering

Abstract:<p>It is aimed in this paper to suggest novel alternatives to recycle phosphogypsum (PG) in road applications. The performance of several formulations for the stabilization of raw PG with other selected materials was evaluated. The research began with a feasibility study of using raw phosphogypsum alone as embankment material, then focusing on the effect of stabilizers such as clayey soil (SM), fly ash (FA), lime (L), calcareous material (CM) and a special hydraulic road binder (HRB). The objective was to increase the strength up to a threshold favouring the use of the stabilized mix as a base material in road pavement, while ensuring a neutralization of acidity generated by PG. Environmental, mineralogical and geotechnical properties of raw materials were investigated. According to compressibility parameters, initial moisture content and compaction characteristics, this study confirms first that the use of PG alone should be limited to ordinary embankments of heights less than 4 m. Secondly, the mix PG:SM = 40:60 allows to use a significant amount of raw PG while maintaining good performances in terms of fractal behaviour of particles size distribution, immersion resistance, load bearing capacity and compaction characteristics. This mix has also successfully passed the compressibility risk under loading effect on the embankments. Finally, the compatibility of the mix (CM:PG:SM):HRB = (10:25:65):7 for the capping and pavement layers use was confirmed. TCLP method was carried out on the stabilized mix samples to verify the contamination risk.</p>

construction & building technology,engineering, civil
Life Cycle Assessment of Alternative Road Base Materials: the Case of Phosphogypsum

M Saadé-Sbeih,A Feraille,A Alaoui Soulimani

DOI: https://doi.org/10.1088/1755-1315/323/1/012092

2019-08-01

IOP Conference Series: Earth and Environmental Science

Abstract:Abstract Phosphogypsum (PG) is the most abundant by-product generated by the phosphate fertilizer industry. Formed during the production of phosphoric acid from natural phosphate rock, PG is mostly disposed in stacks or released into coastal regions’ waters. Due to the expected increase in the world PG production – currently estimated to be around 250 Mt per year – and the environmental impacts of actual waste management scenarios, there is a call for a paradigm shift, by considering PG not as a waste but as a resource. About 15% of the total PG production is nowadays used as fertilizer, retarder, road base material or building material. The load of radionucleids and heavy metals contained in PG however questions the sustainability of such valorization routes. This paper aims to compare the environmental impacts of different PG valorization scenarios through life cycle assessment. Based on Moroccan conditions for phosphoric acid production, it discusses the key parameters influencing the assessment as well as assumptions regarding the allocation of emissions and resource use over PG and phosphoric acid.
The Development of a New Phosphogypsum-Based Construction Material: A Study of the Physicochemical, Mechanical and Thermal Characteristics

Hela Garbaya,Abderraouf Jraba,Mohamed Amine Khadimallah,Elimame Elaloui

DOI: https://doi.org/10.3390/ma14237369

IF: 3.4

2021-12-01

Materials

Abstract:Phosphogypsum (PG) is a waste (or by-product) of the production of phosphoric acid, a basic constituent in the manufacturing of modern fertilizers. The annual production of phosphogypsum in Tunisia is currently estimated to be 10 million tons. Its storage in slag in close proximity to production plants generates pollution problems; however, valorization may be a solution. The present paper proposes a simple process for the valorization of this by-product into a construction material. Several physicochemical characterizations are used to prove the characteristics of samples. The chemical composition shows that PG is a gypsum compound with several impurities. The morphological analyses show that the powder materials are mesoporous with a lower specific area. The structural characterizations show that these solids play the role of a water pump as the degree of hydration changes from 2 to 0 and vice versa, depending on the temperature. Mechanical and thermal analyses show that the prepared formulation is brittle and insulating, which presents opportunities for it to be used as a decoration material.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Optimization of glass scrap recovery and reuse in road construction for promising physicochemical stabilization

Noureddine Ouslimane,Jaouad Bensalah,Hanane Barebita,Mohamed Ebntouhami,Abdel-Rhman Z. Gaafar,Hiba-Allah Nafidi,Youssouf Ali Younous,Mohammed Bourhia,Mustapha Belfaquir

DOI: https://doi.org/10.1038/s41598-024-62862-x

IF: 4.6

2024-06-07

Scientific Reports

Abstract:Waste glass is hugely present in Morocco, and can be recycled for many geotechnical purposes, including road construction. In contrast, earthworks often produce significant amounts of clay waste that lack the necessary technical criteria for use as barriers. The present work aimed to study the influence of the addition of glass waste on the evolution of the mechanical characteristics of clays stabilized with crushed glass (particles less than 63 μm). The work consists of carrying out CBR, Proctor, and shear tests on natural clay taken as a reference and mixtures (clay-crushed glass) at different percentages. Results showed that the addition of glass to clay decreases the swelling and compaction indices along with modifying the intrinsic characteristics of the clay.

multidisciplinary sciences
Valorization of phosphogypsum as a road material: Stabilizing effect of fly ash and lime additives on strength and durability

Sarra Meskini,Azzedine Samdi,Houssine Ejjaouani,Toufik Remmal

DOI: https://doi.org/10.1016/j.jclepro.2021.129161

IF: 11.1

2021-11-01

Journal of Cleaner Production

Abstract:Phosphogypsum is a by-product from the phosphoric acid industry following the wet process. Known for its low cost, this process generates large amounts of phosphogypsum, the management of which has so far remained problematic due to the impurities it contains including heavy metals, radionuclides and acidic residuals. It is above all, its acidic nature that hinders its use as a road material since it increases its solubility which in turn makes it sensitive to water variations. This paper presents an investigation on the stabilization of Moroccan phosphogypsum, through neutralizing acidity, while considering both techno-economic and environmental constraints. To this end, mixtures of phosphogypsum and fly ash were prepared then activated with varying quicklime additions (beyond Initial Consumption of Lime) to develop different combinations of phosphogypsum (40–80%), fly ash (20–60%) and lime (4–20%). These have been tested for their mechanical and mineralogical properties at different curing periods (7, 28, 90, 180 days) besides durability against Wetting/Drying cycles, in order to evaluate the stabilizing effect of fly ash and lime. Results from Unconfined Compressive Strength (UCS) tests showed a strength increase with fly ash and lime addition with increasing the curing time. The UCS at 180 days varied between 1 and 3 MPa for formulations containing 4% lime (ICL) while those with 12–20% lime reached 4–7 MPa (12 times higher than UCS at 7days). As for durability, these showed weight losses of up to 10% upon W/D cycles, a strength loss of up to 56% and high porosity compared to formulations with higher lime content which rather gained up to 264% in strength. The influence of curing time and mixture composition on the mineralogy of the prepared composites was assessed through XRD and TGA analyzes highlighting the formation of ettringite as main hydration product responsible for strength development.

environmental sciences,green & sustainable science & technology,engineering, environmental
Application of Phosphogypsum and Organic Amendment for Bioremediation of Degraded Soil in Tunisia Oasis: Targeting Circular Economy

Hajer Gabsi,Anas Tallou,Faissal Aziz,Rachid Boukchina,Nissaf Karbout,Luis Andreu Caceres,Rafael García-Tenorio,Khaoula Boudabbous,Mohamed Moussa

DOI: https://doi.org/10.3390/su15064769

IF: 3.9

2023-03-09

Sustainability

Abstract:This study was conducted at the Institute of Arid Regions of Gabes in Tunisia. Three plots were left as controls and received no input, three plots were amended with cattle manure with a dose equivalent to 37.5 t/ha, and nine plots were amended with phosphogypsum in three doses (12.5 t/ha, 25 t/ha, and 50 t/ha), with three repetitions for each dose. A pot test to determine the germination index and radioactivity analysis was carried out in the laboratory. The results showed that organic manure amendments and phosphogypsum improved the germination rate of the different crops (jute mallow, turnip, and oat) compared with the control. At the same time, the 50 t/ha dose had the highest germination rate. An increase in yield of all crops during the whole duration of the experiment was observed for the soil amended by phosphogypsum. The best yield was recorded when the highest dose of phosphogypsum was applied. The cadmium level in plants of the two applied amendments was variable but still below the toxicity threshold (7 ppm). The values recorded following the analysis of the phosphogypsum radioactivity showed that the mean value of Ra-226 equals 214.45 Bq/kg, which is below the limit announced by the EPA (Environmental Protection Agency). The radioactivity results from the control soil samples showed the presence of natural radioactivity. Samples of phosphogypsum-amended soil and plants grown in these soils have radioactivity values that are still lower than those announced by the EPA. The novelty aspect of this study is the application of phosphogypsum in different crops during two consecutive years in degraded-soil areas of Tunisia, in addition to the study of different aspects of phosphogypsum reuse in agriculture as a promising strategy for a sustainable environment.

environmental sciences,environmental studies,green & sustainable science & technology
Investigation of the Innovative Combined Reuse of Phosphate Mine Waste Rock and Phosphate Washing Sludge to Produce Eco-Friendly Bricks

Omar Inabi,Abdessamad Khalil,Abir Zouine,Rachid Hakkou,Mostafa Benzaazoua,Yassine Taha

DOI: https://doi.org/10.3390/buildings14092600

IF: 3.324

2024-08-26

Buildings

Abstract:Phosphate mining generates substantial quantities of waste rock during the extraction of sedimentary ores, leading to significant environmental concerns as these wastes accumulate around mining sites. The industry is under increasing pressure to adopt more sustainable practices, necessitating considerable financial investments in remediation and technological advancements. Addressing these challenges requires a holistic strategy that balances social responsibility, environmental preservation, and economic viability. This study proposes an innovative, cost-effective, and environmentally friendly method to manufacture compressed stabilized earth bricks by combining the valorization of phosphate waste rock (PWR) and phosphate washing sludge (PWS). These bricks offer numerous advantages, including low embodied energy, robust mechanical performance, and excellent insulation and thermal properties. Initially, a Toxicity Characteristic Leaching Procedure (TCLP) test and radiometric surface contamination measurement, carried out on raw materials (PWR and PWS), showed that the results were below the permissible limits. Then, the chemical, mineralogical, and geotechnical properties of the raw materials were characterized. Subsequently, various mixtures were formulated in the laboratory using PWR and PWS, with and without cement as a stabilizer. Optimal formulations were identified and scaled up for pilot production of solid bricks with dimensions of 250 × 125 × 75 mm3. The resulting bricks exhibited thermal conductivity and water absorption coefficients that satisfied standard requirements. This method not only addresses the environmental issues associated with phosphate mining waste but also provides a sustainable solution for building materials production.

construction & building technology,engineering, civil
Exploring Waste Tyres Problems and Sustainable Waste Management in the Tunisian Context

Munir Abuzukhar,Hardman Michael,Clark Andrew

DOI: https://doi.org/10.9734/cjast/2022/v41i353956

2022-09-29

Current Journal of Applied Science and Technology

Abstract:Aims and Place of Study: Waste tyres represent one of the environmentally damaging fractions of the solid waste stream in Tunisia, where the problem of inefficient waste tyre management is endemic. This is easily identified by the piles of accumulating tyre waste located on both sides of many streets and in illegal places. therefore, the efficient management of this solid waste category is important given the large quantities generated annually. The difficulties represented by waste tyres in waste management stem from the physical and chemical characteristics of the tyres. Significant environmental problems can also arise due to improper management and disposal of waste tyres. However, in many Global South countries, including Tunisia, the management of waste tyres has not received adequate interest, and the waste tyres' processing, treatment and disposal are still nascent. Methodology: This study attempts to establish the actions of stakeholders who have the responsibility for waste tyre management as an aspect of solid waste in Tunisia. This study also assesses and analyses important aspects of waste tyres management in Tunisia. A combination of two methods is employed in the present investigation: qualitative and quantitative, to determine the factors influencing the effective performance of tyre waste management practice in Tunisia. Data for the present research study was gained using relevant published literature, scientific journals, academic sources, other third sector sources such as government statistical data, and research derived from governments and other agencies and field observations. In addition to the semi-structured interviews with stakeholders involved in waste management, other interviews with actors including governmental, private, academic institutions and NGOs were carried out. Results and Conclusion: The outcomes of this investigation and assessment are a wide-range outline concerning the participants that are important in tyre waste management and a set of aspects affecting the management of waste tyres. The information provided by this study is very critical for reviewing and updating the methods and tools to update waste tyres data and trends to improve tyre waste management system efficiency and suggesting management options of recovering and recycling this waste stream that is most sustainable and beneficial to the environment from a life cycle assessment (LCA) perspective, for the Tunisian context. About current Tunisia’s waste tyre management systems, they have to be improved by introducing specific legislation, with sustainable finance, on the disposal of waste tyres and forming schemes to oversee and manage the country's waste tyre activities. The research has enabled the researcher to produce a set of recommendations to improve the management of waste tyres sustainably in Tunisia.

English Else
Characterization and purification of waste phosphogypsum to make it suitable for use in the plaster and the cement industry

Yassine Ennaciri,Ilham Zdah,Hanan El Alaoui-Belghiti,Mohammed Bettach

DOI: https://doi.org/10.1080/00986445.2019.1599865

2019-04-11

Chemical Engineering Communications

Abstract:The phosphoric acid production in Morocco generates a large amount of phosphogypsum (PG) which is a significant source of environmental contamination. In this work, PG has been characterized by different analysis techniques that allow to study the effect of the impurities on its physical and chemical properties. Thus, a method to purify the PG from phosphates and fluorides was proposed in order to improve its quality and to make it usable in plaster and cement. The purification process consists to sieve PG under 200 μm and to treat it by sulfuric acid to dissolve the insoluble impurities. The obtained results show that the treatment of PG by sulfuric acid 20 and 50% at 60 °C for 2 h is sufficient to make it suitable for used in the plaster and the cement respectively.

engineering, chemical
Characterization of phosphate rock and phosphogypsum from Gabes phosphate fertilizer factories (SE Tunisia): high mining potential and implications for environmental protection

Radhouan El Zrelli,Lotfi Rabaoui,Nabil Daghbouj,Heithem Abda,Sylvie Castet,Claudie Josse,Pieter van Beek,Marc Souhaut,Sylvain Michel,Nejla Bejaoui,Pierre Courjault-Radé

DOI: https://doi.org/10.1007/s11356-018-1648-4

IF: 5.8

2018-03-12

Environmental Science and Pollution Research

Abstract:Since the establishment of the coastal industrial complex in Gabes city (Gulf of Gabes, SE Tunisia), hundred million tons of untreated phosphogypsum have been discharged in the open sea causing serious environmental problems. To better understand the dynamic and behavior of phosphate/phosphogypsum contaminants from raw ores to marine environment, a chemical, organic, mineralogical, and morphological characterization of phosphate rock and phosphogypsum was conducted using several sophisticated techniques. The chemical analysis showed that phosphate and phosphogypsum contain high loads of trace elements and that the transfer factors of pollutants varied from 5.83% (U) to 140% (Hg). Estimated annual flows of phosphogypsum contaminants into the marine environment ranged between 0.05 (Re) and 87,249.60 (F) tons. The phosphate rock was found to be formed by carbonate fluorapatite, calcite, dolomite, natural gypsum, quartz, calcite-Mg, apatite, pyrite, fluorite, and sphalerite-Cd and phosphogypsum by synthetic gypsum and sphalerite-Cd. The phosphate was found to be richer in organic compounds compared to phosphogypsum. Based on this work, the Tunisian phosphogypsum has a high mining potential and encourages the development of an economically beneficial and environmentally friendly phosphogypsum-treating industry.

environmental sciences
Assessment of heavy metals contamination/pollution of phosphogypsum waste of the Mdhilla region (Gafsa, southern Tunisia)

Amor Ben Garali,Sahar Salah,Mohsen Henchiri,Feyda Srarfi

DOI: https://doi.org/10.1007/s10661-024-13383-7

IF: 3.307

2024-11-23

Environmental Monitoring and Assessment

Abstract:Tunisia is currently faced with the extremely delicate problem of managing the millions of tons of phosphogypsum (PG) discharges which is already causing considerable environmental damage. The research carried out in this work is part of a geochemical assessment of the level of heavy metal contamination in phosphogypsum waste from the Mdhilla region (Gafsa, southern Tunisia). The assessment of ETM contamination/pollution is based on the relatively simple principles of measuring concentrations, calculating indices, and comparing them with established standards, which vary according to the nature of the element, its toxicity, and the receiving environment. Six PG samples are taken from the storage heaps right next to the chemical group's plant. Our investigations to assess the level of heavy metals contamination focused on: zinc (Zn), chromium (Cr), copper (Cu), nickel (Ni), and cadmium (Cd). These metallic elements are measured by atomic absorption spectrometry. To achieve our objectives, we calculated several indices, such as the geo-accumulation index (Igeo), the contamination factor (FC), the degree of contamination (DC), and the sediment pollution index (IPS). The index approach enables us to predict the extent of heavy metal pollution in these PG discharges from the Mdhilla region. The Mdhilla region's PG heavy metals contents show the following order of abundance: Zn > Ni > Cr > Cd > Cu. Calculation of contamination/pollution indices reveals in principle polymetallic contamination dominated by three elements: cadmium, nickel, and copper.

environmental sciences
Sustainable approach for nutrient release control in organic fertilisers by using phosphogypsum

Zakaria Asbai,Fatimazahra Boutaleb,Fatima Ezzahra Doublali,Oumaima Mrabet,Meryem Hadidi,Bouchaib Bahlaouan,Said El Antri,Nadia Boutaleb

DOI: https://doi.org/10.1080/00207233.2024.2322882

2024-03-08

International Journal of Environmental Studies

Abstract:Fertilisers maintain agricultural productivity for world needs, Despite the numerous advantages of controlled release fertilisers (CRFs), production expenses and impacts on the environment and soil quality limit widespread adoption. This research focuses on valorising agro-industrial waste through a biotransformation process (anaerobic and aerobic digestion). The resulting biofertilisers, when associated with phosphogypsum (PG) using the simplex-centroid design, create organo-mineral fertilisers with controlled nutrient release. A balanced formulation with 33.33% of each component (digestate, compost, and phosphogypsum) demonstrates a promising sustainable approach, contributing nutritional elements with exceptional control and sustained release characteristics, all without the previous use of coating materials. This environment-friendly approach accords with the Sustainable Development Goals, particularly 2, 3, 12, and 15.
Treatment and Purification of Phosphogypsum

Shadia Hanem El Rafie,Hamdy El Ghetany,Rania Ramadan Abuel Aila,Marwa Hosni GABER,Rania Abuel Aila,Marwa GABER

DOI: https://doi.org/10.21608/ejchem.2019.13267.1934

IF: 1.3

2019-11-17

Egyptian Journal of Chemistry

Abstract:Abstract Production of phosphoric acid and phosphate fertilizers are still generating pollution problem. The (PG) wasted phosphogypsum by product created through the manufacture consists of many valuable materials to be recovered. For each ton phosphoric acid produced, about 4 – 5 tons (PG) waste was generated. The (PG) waste is generally dumped near the production plants causing contamination of ground water, soil and large extensions of land were occupied by (PG) piles. The present work proposed recovery of (PG) waste after purification, while XRF was used to present its main constituents. Valuable materials such as calcium carbonate can be recovered for soil conditioning by sea water treatment. Sodium sulphate was prepared form (PG) purified too and detected by XRD. SEM and EDAX were used to compare between purified and (PG) waste. Solar thermal energy was used to calcine (PG) waste rocks and minimize electrical energy use successfully.

English Else
Recovery of mining and agri-food wastes in fired materials: a case study of the Moroccan industry

Mouad Harrami,Hassan Ez-Zaki,Nisrine El Fami,Nacer Khachani,Abdeljebbar Diouri

DOI: https://doi.org/10.1007/s11356-024-35256-9

Abstract:The linear economy follows the "take-make-dispose" model and generates huge amounts of waste without consideration for recycling or reuse. This model which deals with raw materials puts pressure on natural resources and creates a serious environmental impact. In a circular economy, the "reduce-reuse-recycle" model is applied to recycle waste into resources and reduce the impact on the environment and society. This work aims to highlight the significance of implementing a circular economy approach in the construction sector by merging two different production lines, notably mining activity and agri-food industry. The investigation presents sustainable management of coal mine waste (CMW) and olive pomace (OP) in the production of eco-friendly fired materials and introduces an innovative approach for manufacturing lightweight fired bricks. Microstructural, physical, mechanical, and thermal properties were determined to evaluate the technological quality of fired materials at 900 °C. As a pore-forming agent, adding 10 wt% OP yielded specimens with a bulk density of 1552 kg/m3, water absorption of 19.80%, apparent porosity of 29.61%, loss on ignition of 26.98%, and compressive strength of 7.08 MPa, satisfying standards for clay masonry units. Simultaneously, it enhances the thermal insulation by reducing thermal conductivity by 18% compared to the control sample with CMW. In this regard, the transition to a greener construction sector necessitates the immediate implementation of a circular economy approach to developing eco-friendly building materials by recovering large amounts of industrial waste, limiting the overuse of natural resources (e.g., clays), and improving the engineering properties of the final product.
Valorization of Moroccan Phosphate Sludge Through Isolation and Characterization of Phosphate Solubilizing Bacteria and Assessment of Their Growth Promotion Effect on Phaseolus vulgaris

El Houcine Ait-Ouakrim,Abdelghani Chakhchar,Cherkaoui El Modafar,Allal Douira,Soumia Amir,Saad Ibnsouda-Koraichi,Bouchra Belkadi,Abdelkarim Filali-Maltouf

DOI: https://doi.org/10.1007/s12649-023-02054-2

2023-01-26

Waste and Biomass Valorization

Abstract:Mining activities generate considerable quantities of wastes that are usually accumulated in the open air, and form dykes that disfigure the landscape and arable land. The present study aims to isolate and select the phosphate solubilizing bacteria (PSBs) from Phosphate Solid Sludge to improve the agronomic efficacy of phosphate bio-fertilizers.

environmental sciences
Beneficial reuse of Brest-Harbor (France)-dredged sediment as alternative material in road building: laboratory investigations

Walid Maherzi,Mahfoud Benzerzour,Yannick Mamindy-Pajany,Eleanor van Veen,Mohamed Boutouil,Nor Edine Abriak

DOI: https://doi.org/10.1080/09593330.2017.1308440

IF: 3.475

2017-04-09

Environmental Technology

Abstract:The scarcity of natural aggregates promotes waste reuse as secondary raw material in the field of civil engineering. This article focuses on the beneficial reuse of marine-dredged sediments in road building. Thus, mixtures of raw sediments and dredged sand collected from Brest Harbur (Bretagne, France) were treated with road hydraulic binders. Formulation were prepared and characterized as recommended by the French Technical Guidelines for soil treatment with lime and/or hydraulic binders. Mechanical resistance results are quite similar for both the hydraulic binders, suggesting a similar reactivity with the studied sediment sample. However, some discrepancies can be noted on sustainability parameters. Indeed, water resistance after immersion at 40°C is significantly better for the mixtures treated with cement containing more glass-forming oxides (SiO2 + Al2O3) and fluxing (Fe2O3+CaO + MgO + K2O + Na2O). Moreover, the both hydraulic binders can lead to swelling in the road materials as observed in scanning electron microscopy analyses. Indeed, microscopic observations indicated volumetric swelling of treated samples, which is greatly influenced on the one side by ettringite quantity and on the other hand by the presence of water in pores material.

environmental sciences
Recycling phosphogypsum in road construction materials and associated environmental considerations: A review

Jiahui Men,Yiming Li,Peifeng Cheng,Zhanming Zhang

DOI: https://doi.org/10.1016/j.heliyon.2022.e11518

IF: 3.776

2022-11-14

Heliyon

Abstract:Phosphogypsum (PG) is a major hazardous by-product of the phosphate industry. The whole world is facing the challenge of increasing stockpiles of PG, which significantly affect safety and the environment. Recycling this material may be an environmentally friendly and safe solution to this challenge. In this paper, we searched the Web of Science database for 2369 articles from 1975 to 2022 using "phosphogypsum" as the keyword. Using the VOSviewer as the literature visualisation tool, density visualisation was performed with keywords as the analysis units, and it was found that the researchers focused mainly on PG applications in construction and radionuclides. Over the years, different routes to PG valorisation have been developed in the agricultural, construction, environmental and energy sectors, and these topics are described in this review. As infrastructure projects, highway engineering is characterised by a large land area and high resource consumption. Therefore, applying PG to road materials can significantly increase the reuse and consumption of PG and reduce PG stockpiles. We hope that PG can be used for road construction on a large scale in the future. This paper focuses on the latest developments in PG as road materials. The most serious difficulty in using PG as road materials at present is that it contains radionuclides and heavy metal impurities, which can be purified by pretreatment methods. However, how to scale it up requires continuous research.

English Else
Enhancing Sustainable Construction Practices: Utilizing Heat-Treated Recycled Concrete Fines for Improving Slag-Based Geopolymer Materials

Amirouche Berkouche,Ahmed Abderraouf Belkadi,Abdelaziz Hasnaoui,Salima Aggoun,Tarek Chiker,Abdelhak Khechai,Annelise Cousture,Tahar Tayebi

DOI: https://doi.org/10.1007/s13369-024-09477-6

IF: 2.807

2024-09-01

Arabian Journal for Science and Engineering

Abstract:This study explores the untapped potential of utilizing heat-treated recycled fines (HT-RFs) from mortar as a sustainable and eco-friendly alternative for slag-based geopolymer materials in construction. The RFs undergo a novel heat treatment process at 650 °C to significantly enhance their reactivity. Geopolymer mixtures incorporating both heat-treated and untreated RFs at various replacement ratios (0%, 10%, 20%, and 30%) are meticulously evaluated for their porosity, flexural strength, and compressive strength after 28 days of curing. The load-midspan displacement and failure behavior are analyzed using digital image correlation techniques. The microstructure of the mortar samples is comprehensively analyzed using state-of-the-art techniques including thermogravimetry, scanning electron microscopy, and X-ray diffraction. The results showed that the incorporation of 30% heat-treated recycled fines into slag based geopolymer increased compressive and flexural strengths by 30.67% and 27.31%, respectively, while substantially reducing the porosity by 16%, compared to the control geopolymer mixture. This study promotes sustainability in construction with eco-friendly materials by minimizing waste.

multidisciplinary sciences

Recycling of Tunisian Phosphogypsum as Road Material: Assessment of the Mechanical and Leaching Behavior

Environmental investigation on the use of a phosphogypsum-based road material: Radiological and leaching assessment

A phosphogypsum‐based road material with enhanced mechanical properties for sustainable environmental remediation

Phosphogypsum recycling: New horizons for a more sustainable road material application

Life Cycle Assessment of Alternative Road Base Materials: the Case of Phosphogypsum

The Development of a New Phosphogypsum-Based Construction Material: A Study of the Physicochemical, Mechanical and Thermal Characteristics

Optimization of glass scrap recovery and reuse in road construction for promising physicochemical stabilization

Valorization of phosphogypsum as a road material: Stabilizing effect of fly ash and lime additives on strength and durability

Application of Phosphogypsum and Organic Amendment for Bioremediation of Degraded Soil in Tunisia Oasis: Targeting Circular Economy

Investigation of the Innovative Combined Reuse of Phosphate Mine Waste Rock and Phosphate Washing Sludge to Produce Eco-Friendly Bricks

Exploring Waste Tyres Problems and Sustainable Waste Management in the Tunisian Context

Characterization and purification of waste phosphogypsum to make it suitable for use in the plaster and the cement industry

Characterization of phosphate rock and phosphogypsum from Gabes phosphate fertilizer factories (SE Tunisia): high mining potential and implications for environmental protection

Assessment of heavy metals contamination/pollution of phosphogypsum waste of the Mdhilla region (Gafsa, southern Tunisia)

Sustainable approach for nutrient release control in organic fertilisers by using phosphogypsum

Treatment and Purification of Phosphogypsum

Recovery of mining and agri-food wastes in fired materials: a case study of the Moroccan industry

Valorization of Moroccan Phosphate Sludge Through Isolation and Characterization of Phosphate Solubilizing Bacteria and Assessment of Their Growth Promotion Effect on Phaseolus vulgaris

Beneficial reuse of Brest-Harbor (France)-dredged sediment as alternative material in road building: laboratory investigations

Recycling phosphogypsum in road construction materials and associated environmental considerations: A review

Enhancing Sustainable Construction Practices: Utilizing Heat-Treated Recycled Concrete Fines for Improving Slag-Based Geopolymer Materials