Abstract:This paper, a multi-material topology optimization method (MMTO) is presented for two-dimensional structures using modified ordered solid isotropic material with penalization (SIMP) under multiple constraints such as mass, stiffness, frequency, and stress. The element density is obtained by a density filtering and the Heaviside approximation , which are combined to avoid gray elements and numerical issues of stress. Effective improvement of multiphase material topology optimization was performed including the criteria for stiffness, stress, and free vibration. P -norm stress aggregation is employed to calculate the maximum von Mises stress and sensitivity of von Mises stress is formulated by the adjoint method. The natural frequency and stress constraints are solved simultaneously to enhance the stability and reduce the stress concentration of the optimized structures, which are not much covered in the literature. The multi-mode phenomenon in the eigenfrequency problem is treated by the simply proposed technique. Results indicate that the multi-material designs with multi-constraints can be illustrated and optimized effectively. The optimized topologies, for stress minimization, indicate that the maximum stress can be significantly reduced compared with compliance minimization. The maximum von Mises stress of the topological results considering the maximum stiffness with natural frequency and mass constraints is higher than that maximum stiffness with only mass constraints, which indicates that the optimized structure created considering the eigenvalues is safer. The proposed approach can obtain a reasonable result that effectively controls the stress level and reduces the stress concentration at the high stress regions of multi-phase material structures with multi-constraints. Benchmark numerical examples are presented to confirm the effectiveness of the presented method.

Simultaneous Topology Optimization of Material Density and Anisotropy

Free Isotropic Material Optimization Via Second Order Cone Programming

Discrete Multi-Material Topology Optimization under Total Mass Constraint

Topology Optimization of Material Nonlinear Continuum Structures under Stress Constraints

TOPOLOGY OPTIMAL DESIGN OF THERMO-ELASTIC STRUCTURES

Topology Optimization of Thermo-Elastic Structures with Multiple Materials under Mass Constraint

Maximal Stiffness Design of Two-Material Structures by Topology Optimization with Nonprobabilistic Reliability

Non-probabilistic Reliability Based Topology Optimization Design of Two-material Structures

Topology Optimal Design of Material Microstructures Using Strain Energy-based Method

TOPOLOGY OPTIMIZATION OF STRUCTURES DESIGNED WITH MULTIPHASE MATERIALS: VOLUME CONSTRAINT OR MASS CONSTRAINT?

New Developments for an Efficient Solution of the Discrete Material Topology Optimization of Composite Structures

Topology Optimization of Continuum Structures for the Uniformity of Contact Pressures

Simultaneous Design of Structural Topology and Material Properties

Bi-directional Evolutionary Topology Optimization of Geometrically Nonlinear Continuum Structures with Stress Constraints

Topology optimization of structures under multiple loading cases with a new compliance-volume product

Computational design of auxetic microstructures via stress-based topology optimization

Topology Optimization Of Continuum Structures With Drucker-Prager Yield Stress Constraints

Topology Optimization of Couple-Stress Material Structures

Topology Optimization and Efficiency Evaluation of Short-Fiber-Reinforced Composite Structures Considering Anisotropy

Direction-Oriented Stress-Constrained Topology Optimization of Orthotropic Materials

Design of the multiphase material structures with mass, stiffness, stress, and dynamic criteria via a modified ordered SIMP topology optimization