Ultrafast all-climate aluminum-graphene battery with quarter-million cycle life

Hao Chen,Hanyan Xu,Siyao Wang,Tieqi Huang,Jiabin Xi,Shengying Cai,Fan Guo,Zhen Xu,Weiwei Gao,Chao Gao

DOI: https://doi.org/10.1126/sciadv.aao7233

IF: 13.6

2017-12-01

Science Advances

Abstract:Trihigh tricontinuous graphene cathode enables a 1.1 s charge, 250,000 cycle life, wide temperature range Al-ion battery.

multidisciplinary sciences

What problem does this paper attempt to address?

Ternary Perovskite Cobalt Titanate/Graphene Composite Material As Long-Term Cyclic Anode for Lithium-Ion Battery

Meng Li,Xuezhang Xiao,Yujie Liu,Wei Zhang,Yiwen Zhang,Lixin Chen

DOI: https://doi.org/10.1016/j.jallcom.2017.01.073

IF: 6.2

2017-01-01

Journal of Alloys and Compounds

Abstract:A novel perovskite CoTiO3/graphene composite with a particle size of 100 nm was synthesized by ball milling and high temperature solid method and utilized as anode materials for lithium-ion batteries. The structure morphology and electrochemical performance of CoTiO3/graphene nanocomposite were investigated by X-ray diffraction (XRD), Raman spectroscopy measurements, scanning electron microscopy (SEM), galvanostatic charge-discharge tests and electrochemical impedance spectroscopy (EIS) tests. The CoTiO3/graphene nanocomposite delivers a higher stable discharge capacity (similar to 500 mAh g(-1)) and better cycling stability (86.2%), as well as improved rate capability over 80 cycles, compared with those of bare CoTiO3. Moreover, this CoTiO3/graphene nanocomposite exhibits stable discharge capacity (similar to 350 mAh g(-1)) after 3000 cycles at high current density (1 A g(-1)). The improved electrochemical properties of CoTiO3/graphene can be attributed to the good conductivity and large surface of graphene and the combination novel nanostructure of CoTiO3 and graphene. (C) 2017 Elsevier B.V. All rights reserved.
Ultra-small and Highly Crystallized ZnFe2O4 Nanoparticles Within Double Graphene Networks for Super-Long Life Lithium-Ion Batteries

Longhai Zhang,Tong Wei,Jingming Yue,Lizhi Sheng,Zimu Jiang,Deren Yang,Libo Yuan,Zhuangjun Fan

DOI: https://doi.org/10.1039/c7ta02726e

IF: 11.9

2017-01-01

Journal of Materials Chemistry A

Abstract:We report a novel strategy for spatial confinement of ultra-small and highly crystallized ZnFe2O4 nanoparticles within double graphene networks constructed by ultra-small and large graphene sheets. The ZnFe2O4/graphene hybrid exhibits a large reversible capacity, excellent rate capability, and superior cycling stability.
Capacitive charge storage enables an ultrahigh cathode capacity in aluminum-graphene battery

Hanyan Xu,Hao Chen,Haiwen Lai,Zheng Li,Xiaozhong Dong,Shengying Cai,Xingyuan Chu,Chao Gao

DOI: https://doi.org/10.1016/j.jechem.2019.09.025

IF: 13.1

2020-01-01

Journal of Energy Chemistry

Abstract:Aluminum-graphene battery is promising for its abundant raw materials, high power density, ultralong cycle life and superior safety. However, the development of aluminum-graphene battery is currently restricted by its insufficient cathode capacity, calling for a newly developed working mechanism. In addition, an irregular constant increase of the cathode capacity was always observed during cycling, but cannot be explained based on the current understanding. Here, we observed an increase of specific capacity by 60% with stable Coulombic efficiency of 98% during 7000 cycles life of Al-graphene batteries employing AlCl3/ET3NHCl electrolyte. We demonstrated this growing cathode capacity is attributed to an increasing contribution of capacitive charge storage during cycling, because a gradually enlarged surface area as capacitive active sites is enabled by the exfoliation of graphitic cathode during the periodic intercalation process. Moreover, the graphene cathode was exfoliated more significantly in AlCl3/ET3NHCl than 1-ethyl-3-methylimidazolium chloride-based electrolyte, which results from the heavier stress on the graphene layers caused by the larger intercalants in AlCl3/ET3NHCl. The common intercalation of cations with AlCl4- clusters was therefore supposed to occur during charging. This new proposed mechanism can offer the new thought for future design on high-capacity cathode of Al-ion battery. (C) 2019 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by Elsevier B.V. and Science Press. All rights reserved.
Three-Dimensional Double-Walled Ultrathin Graphite Tube Conductive Scaffold with Encapsulated Germanium Nanoparticles as a High-Areal-Capacity and Cycle-Stable Anode for Lithium-Ion Batteries

Runwei Mo,Zhengyu Lei,David Rooney,Kening Sun

DOI: https://doi.org/10.1021/acsnano.8b09027

IF: 17.1

2019-07-23

ACS Nano

Abstract:The demand for lithium-ion batteries with both high power and high-energy density has attracted widespread attention as energy-storage devices for the increasing demand of consumer electronics, electric vehicles, and grid-scale storage. However, the fabrication of an advanced electrode architecture with high areal capacity, excellent cycling stability, and superior rate performance remains a long-term challenge in the development of advanced electrochemical energy-storage devices. Herein, we design an effective and general strategy to spontaneously encapsulate Ge nanoparticles into a three-dimensional double hydrophilic N-doped ultrathin graphite/void/hydrophobic ultrathin graphite tube network (Ge@3D-DHGT) with control over the position for large specific capacity (1338 mA h g-1), high rate performance (752 mA h g-1 at 40 C), and superior cycling stability (up to 1000 cycles). Toward the practical application, the as-prepared Ge@3D-DHGT electrode showed a large areal capacity (10 mA h cm-2 under 8 mA cm-2), which provides a highly promising anode with both high capacity and high rate performance. Importantly, this work provides an approach to fabricate high-areal-capacity anodes with long cycling stability and rapid charge-discharge properties with practical applications in advanced rechargeable batteries.
An ultrafast rechargeable aluminium-ion battery

Meng-Chang Lin,Ming Gong,Bingan Lu,Yingpeng Wu,Di-Yan Wang,Mingyun Guan,Michael Angell,Changxin Chen,Jiang Yang,Bing-Joe Hwang,Hongjie Dai

DOI: https://doi.org/10.1038/nature14340

IF: 64.8

2015-04-01

Nature

Abstract:An aluminium-ion battery is reported that can charge within one minute, and offers improved cycle life compared to previous devices; it operates through the electrochemical deposition and dissolution of aluminium at the anode, and the intercalation/de-intercalation of chloroaluminate anions into a novel graphitic-foam cathode.

multidisciplinary sciences
Ultrafast Charge and Long Life of High-Voltage Cathodes for Dual-Ion Batteries Via a Bifunctional Interphase Nanolayer on Graphite Particles.

Kejia Zhang,Decheng Li,Jie Shao,Yu Jiang,Linze Lv,Qiang Shi,Qunting Qu,Honghe Zheng

DOI: https://doi.org/10.1002/smll.202206360

IF: 13.3

2023-01-01

Small

Abstract:Dual-ion batteries (DIBs) with Co/Ni-free cathodes especially graphite cathodes are very attractive energy storage systems in the long run because of the cost effectiveness and sustainability. However, graphite cathodes severely suffer from poor structural stability during anions storage at high potentials owing to the oxidative decomposition of electrolytes and volume expansion. This work proposes an artificial cathode/electrolyte interphase (CEI) strategy by implanting polyphosphoric acid (PPA) nanofilms tightly on natural graphite (NG) particles via interfacial hydrogen bonding. The electrochemical results show that the PPA-modified graphite cathodes possess enhanced charge-discharge reversibility, accelerated electrode reaction kinetic, decreased resistance, decelerated self-discharge, and prolonged cycling life. Through post-analyses on the cycled graphite cathodes, the improved performance is mainly attributed to the PPA-based CEI, which effectively mitigates the electrolyte decomposition and protects the graphitic structure. More interestingly, the hydrogen bonding interactions between poly(vinyldifluoride) (PVDF) binder and PPA as validated through density functional theory calculations and practical experiments can increase the contact sites of PVDF chains on NG@PPA particles. Meanwhile, the cross-linking effect of PPA can enhance the mechanical strength of PVDF, thus the long life of NG@PPA cathode is also correlated with the improved mechanical stability of the entire electrode.
A Novel Three-Dimensional Cathode with Stable Long Cycling Performance for Lithium Oxygen Batteries

Tong Wang,Peng Zhang,Xu Wang,Qi Chen,Miao Wang

DOI: https://doi.org/10.1016/j.jelechem.2018.10.033

IF: 4.598

2018-01-01

Journal of Electroanalytical Chemistry

Abstract:Non-aqueous Li-O-2 battery has attracted plenty of interest due to its super theoretical energy density. Nevertheless, it also faces formidable challenges with respect to an unaccepted overpotential during charge process and a low round trip efficiency, which leads to a poor cycle life. Herein, we present a novel binder-free composite cathode comprised of MgCo2O4@3D graphene with a three-dimensional structure, which has never been used in the lithium oxygen batteries, as a cathode applied in the non-aqueous Li-O-2 battery. The MgCo2O4 nanowires as the catalyst is grown on the graphene substrate supported by the nickel foam. The discharge product Li2O2 formed with a flake-like morphology decompose at a low potential ascribed to excellent catalytic activity from MgCo2O4. Finally, we demonstrate a non-aqueous Li-O-2 battery capable of operating over 480 cycles with limiting capacity and rate values at 400 mAhg(-1) and 200 mAg(-1).
Long life exceeding 10 000 cycles for aluminum-ion batteries based on an FeTe2@GO composite as the cathode

Li Yang,Jie Liu,Yongshuai Liu,Yuhao Li,Fengkai Zuo,Yifei Xu,Yangyang Wu,Qiang Li,Hongsen Li

DOI: https://doi.org/10.1039/d2cc04109j

IF: 4.9

2022-09-12

Chemical Communications

Abstract:A nanocomposite consisting of iron telluride wrapped with graphene oxide (GO) was prepared via a hydrothermal method. As the cathode material for aluminum-ion batteries (AIBs), it exhibited a remarkable long-term cycle performance with a reversible capacity of 120.4 mA h g −1 at 1 A g −1 after 10 000 cycles, i.e. , a cyclability better than those of all other transition metal chalcogenides in AIBs reported to date. Furthermore, an energy storage mechanism, involving the intercalation and deintercalation of multiple ions (AlCl 4 − , Cl − and Al 3+ ), was elucidated. This study offers guidance for further development of transition metal tellurides for AIBs.

chemistry, multidisciplinary
Fast-charged aluminum-ion battery with aluminum-graphene nanocomposite anode

L. A. Yolshina,P. Yu. Shevelin,K. V. Druzhinin,V. A. Elterman,V. A. Yolshina,R. V. Muradymov

DOI: https://doi.org/10.1007/s11581-020-03799-9

IF: 2.961

2020-10-15

Ionics

Abstract:Currently, aluminum-ion batteries are considered attractive energy storage devices because aluminum is an inexpensive, widely available, environmentally friendly, low-flammable, and high recyclable electrode material. Electrochemical cell simulating the work of an aluminum-ion battery with aluminum-graphene nanocomposite–negative electrode, positive graphene electrode, and chloroaluminate ionic liquid 1-ethyl-3-methylimidazolium chloride has been designed and tested. The cell exhibits excellent performance and long shelf life. The aluminum-graphene composite is not prone to oxidation over a long period of time. Consequently, the negative electrode surface does not undergo passivation by trace amounts of water and oxygen in the electrolyte during storage, which considerably prolongs the battery shelf life. The analyzed cell delivered stable performance across a wide range of charge/discharge rates for several thousands of cycles without any noticeable loss in capacity and Coulombic efficiency. It has almost 100% Coulombic efficiency at high charge/discharge current densities and retains its characteristics after a 7-day current-free period.Graphical abstract

chemistry, physical,physics, condensed matter,electrochemistry
An Amorphous Carbon-Graphite Composite Cathode for Long Cycle Life Rechargeable Aluminum Ion Batteries

Jiang Wei,Wei Chen,Demin Chen,Ke Yang

DOI: https://doi.org/10.1016/j.jmst.2017.06.012

2017-01-01

Journal of Material Science and Technology

Abstract:Natural graphite is investigated as the cathode for aluminum ion batteries in recent years. However, some drawbacks of the natural graphite such as severe volume swelling shorten its lifetime. In this work, we prepared a composite material by depositing an amorphous carbon on the graphite paper. The composite was used as a cathode to study the electrochemical performance in aluminum ion batteries. The charge/discharge results showed that the composite could exhibit a longer cycle life than the graphite paper. Electrochemical analyses demonstrated that the interface between the amorphous carbon and the graphite paper made a major contribution to the improvement of the cycling stability.
Unlocking the Lithium Storage Capacity of Aluminum by Molecular Immobilization and Purification

Guanglin Xia,Hongyu Zhang,Ming Liang,Jian Zhang,Weiwei Sun,Fang,Dalin Sun,Xuebin Yu

DOI: https://doi.org/10.1002/adma.201901372

IF: 29.4

2019-01-01

Advanced Materials

Abstract:Aluminum is regarded as a promising alternative for graphite anode in next-generation lithium-ion batteries, but its application is hindered by the simultaneous presence of aluminum oxide and the huge volume changes. Herein, hydrogenation-induced self-assembly of robust Al nanocrystals with high purity that are uniformly anchored on graphene is demonstrated. The strong molecular interaction between Al and graphene can not only thermodynamically facilitate the homogenous distribution of Al on graphene but also effectively alleviate the volume changes and preserve the structural integrity of the electrode. More importantly, density functional theory calculations reveal that the absence of oxidation can lower the energy barrier for Li diffusion inside the Al matrix to less than 1/6 of that in an Al matrix with only one monolayer coverage of oxygen. These unique structural features enable the aluminum/graphene nanosheets (Al@GNs) electrode to realize a high reversible capacity of 1219 mAh g-1 and an excellent cycling stability with capacity of 766 mAh g-1 after 1000 cycles at the 3 A g-1 rate. Furthermore, a full cell, comprising an Al@GNs anode and LiFePO4 cathode, exhibits remarkable capacity retention of 96.4% after 100 cycles at the 0.5 A g-1 rate.
Two-Dimensional F-Ti 3 C 2 T x @Ag Composite for an Extraordinary Long Cycle Lifetime with High Specific Capacity in an Aluminum Battery

Xiaogeng Huo,Bao Zhang,Jianling Li,Xiaoxu Wang,Te Qin,Yu Zhang,Feiyu Kang

DOI: https://doi.org/10.1021/acsami.0c20808

2021-03-04

Abstract:According to the current research, the graphene-like two-dimensional materials present excellent electrochemical performance in aluminum batteries. However, there is less research on emerging two-dimensional materials in aluminum batteries, and the energy storage mechanism is ambiguous. Herein, we modified the two-dimensional few layered Ti3C2Tx (F-Ti3C2Tx) with Ag+ and prepared a composite material F-Ti3C2Tx@Ag. The results of physical characterization show that Ag+ is reduced to Ag by Ti ions and is in situ grown on the surface and interlayer of F-Ti3C2Tx. More importantly, the electrochemical performance of the two-dimensional material F-Ti3C2Tx@Ag is studied in an aluminum battery and shows extraordinary long cycle lifetime with high specific capacity. The discharge specific capacity is about 150 mA h g–1 after 2000 cycles at a current density of 0.5 A g–1. Furthermore, the energy storage mechanism of F-Ti3C2Tx@Ag in aluminum batteries is studied, which shows that it is mainly the intercalation/de-intercalation of [AlCl4]−, accompanied by a small amount of Al3+ intercalating/de-intercalating. In addition, density functional theory (DFT) calculations are carried out to study the interaction between and [AlCl4]− and between MXene and [AlCl4]−. The results show that [AlCl4]− anions are easier to intercalate/de-intercalate between the layers of Ti3C2O2–Ag.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c20808?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c20808</a>.Detailed preparation process of electrode materials and batteries (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c20808/suppl_file/am0c20808_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

materials science, multidisciplinary,nanoscience & nanotechnology
Lithium Titanate Tailored by Cathodically Induced Graphene for an Ultrafast Lithium Ion Battery

yingchang yang,binghan qiao,xuming yang,laibing fang,chengchi pan,weixin song,hongshuai hou,xiaobo ji

DOI: https://doi.org/10.1002/adfm.201304263

IF: 19

2014-01-01

Advanced Functional Materials

Abstract:Nonoxidative cathodically induced graphene (CIG) here incorporates conductive agents for Li4Ti5O12 (LTO) anode materials. The tailored LTO/CIG composite is fabricated by controlled hydrolysis of tetrabutyl titanate in the presence of nonoxidative defect-free cathodically induced graphene (CIG) and oxalic acid in a mixed solvent of ethanol and water, followed by hydrothermal reaction and a calcination treatment. Due to the introduction of defect-free graphene, the resulting LTO/CIG composite shows an excellent electrical conductivity (1.2 x 10(-4) S cm(-1)) and Li+ diffusion coefficient (1.61 x 10(-12) cm(2) s(-1)). As a result, the tuned LTO/CIG composite exhibits outstanding electrochemical performance, including excellent cycling stability (the capacity retention ratios after 500 cycles at 0.5 C is 96.2%) and a remarkable rate capability (162 mAh g(-1) at 10 C, 126 mAh g(-1) at 100 C). A specific energy of 272 Wh kg(-1) at power of 136 W kg(-1) is observed when cycling against Li-foil. Even during 36 s of charge/discharge, the specific energy of LTO/CIG composite remains at 166 Wh kg(-1)
Enhancing Electrochemical Performance of Aluminum‐ion Batteries with Fluorinated Graphene Cathode

Haiping Lei,Tianwei Wei,Jiguo Tu,Suqin Li,Shuqiang Jiao

DOI: https://doi.org/10.1002/cssc.202400423

IF: 8.4

2024-05-02

ChemSusChem

Abstract:In pursuit of high‐performance aluminum‐ion batteries, the selection of a suitable positive electrode material assumes paramount importance, and fluorinated graphene (FG) nanostructures have emerged as an exceptional candidate. In the scope of this study, a flexible tantalum foil is coated with FG to serve as the positive electrode for aluminum‐ion batteries. FG positive electrode demonstrates a remarkable discharge capacity of 109 mA h g−1 at a current density of 200 mA g−1, underscoring its tremendous potential for energy storage applications. Concurrently, the FG positive electrode exhibits a discharge capacity of 101 mA h g−1 while maintaining an impressive coulombic efficiency of 95% over 300 cycles at a current density of 200 mA g−1, which benefiting from the significant structure of FG. The results of the in‐situ Raman spectroscopy signified the presence of intercalation/de‐intercalation processes of AlCl4− behavior within the FG layers.

chemistry, multidisciplinary,green & sustainable science & technology
Flexible, binder-free and high-loading graphite paper cathodes for ultra-high capacity and long-life Al-graphite dual-ion batteries

Xiao Zheng,Fangfang Zhao,Lei Ma,Ruixian Tang,Yanru Dong,Guolong Kong,Yu Zhang,Sulin Niu,Tang,Yue Wang,Aimin Pang,Wei Li,Liangming Wei,Gen Tang

DOI: https://doi.org/10.1016/j.electacta.2021.138201

IF: 6.6

2021-06-01

Electrochimica Acta

Abstract:Aluminum batteries have received extensive research because of the safety, abundance and high capacity of Al anode. Most previous works are concentrated on improving the specific capacity of the cathodes, while other important issues such as cheap cathode-electrolyte system and high areal active material loading have often been overlooked. This paper reports that cheap graphite paper (GP) coupled with low price AlCl3/Et3NHCl ionic liquid (IL) electrolyte can form a practical Al dual-ion battery (ADIB). By adjusting the AlCl3 content in IL, the energy storage of GP with high-loading is improved. The ADIB exhibits 71 mAh g−1 at 200 mA g−1 with a loading of 15.16 mg cm−2, which is almost unattenuated over 1400 cycles. The GP cathode presents 47 mAh g−1 at 150 mA g−1 when the loading increased to 30.21 mg cm−2. Even at an ultrahigh loading of 46.35 mg cm−2, the cathode can still achieve 75 mAh g−1 (3.5 mAh cm−2) at 40 mA g−1 for over 500 stable cycles. The high capacity is contributed by a self-activating process of AlCl4− intercalation, which is closer to the diffusion-controlled battery behavior. The GPs simultaneously exhibit high areal capacity, energy/power density and long-life cycling performance which demonstrates their wide commercial prospects.

electrochemistry
Three-dimensional graphene foam supported Fe₃O₄ lithium battery anodes with long cycle life and high rate capability.

Jingshan Luo,Jilei Liu,Zhiyuan Zeng,chin fan ng,Lingjie Ma,Hua Zhang,Jianyi Lin,Zexiang Shen,Hong Jin Fan

DOI: https://doi.org/10.1021/nl403461n

IF: 10.8

2013-01-01

Nano Letters

Abstract:Fe3O4 has long been regarded as a promising anode material for lithium ion battery due to its high theoretical capacity, earth abundance, low cost, and nontoxic properties. However, up to now no effective and scalable method has been realized to overcome the bottleneck of poor cyclability and low rate capability. In this article, we report a bottom-up strategy assisted by atomic layer deposition to graft bicontinuous mesoporous nanostructure Fe3O4 onto three-dimensional graphene foams and directly use the composite as the lithium ion battery anode. This electrode exhibits high reversible capacity and fast charging and discharging capability. A high capacity of 785 mAh/g is achieved at 1C rate and is maintained without decay up to 500 cycles. Moreover, the rate of up to 60C is also demonstrated, rendering a fast discharge potential. To our knowledge, this is the best reported rate performance for Fe3O4 in lithium ion battery to date.
Artificial Graphite Paper as a Corrosion‐Resistant Current Collector for Long‐Life Lithium Metal Batteries

Yimei Li,Qiang Guo,Yong Wu,Danfeng Ying,Yanan Yu,Tengsheng Chi,Shengjie Xia,Xufeng Zhou,Zhaoping Liu

DOI: https://doi.org/10.1002/adfm.202214523

IF: 19

2023-02-13

Advanced Functional Materials

Abstract:A novel artificial graphite paper with lightweight, high conductivity, and flexibility is proposed as a current collector for lithium metal anode. Compared with the copper foil current collector, graphite paper avoids the problem of galvanic corrosion and maintains good electrical contact with Li foil during cycling, enabling pouch cells to achieve longer cycle life. The employment of ultra‐thin lithium metal anode with high loading cathode is the key to realizing high‐energy‐density rechargeable lithium batteries. Ultra‐thin lithium foils are routinely loaded on a copper substrate in batteries, however, the close contact of these two metals causes galvanic corrosion in the presence of electrolyte, which results in irreversible consumption of lithium and decomposition of electrolyte. Herein, a lightweight and highly conductive flexible graphite paper (GP) is applied to replace Cu foil as the current collector for lithium metal anode. It is demonstrated that the application of GP prevents galvanic corrosion and maintains intimate and steady contact between Li foil and GP current collector during cycling, thereby improving the electrochemical performance of the battery. A 1.08 Ah pouch cell assembled with Li@GP anode and LiNi0.8Co0.1Mn0.1O2 cathode exhibits a long lifetime of 240 cycles with a capacity retention of 91.6% under limited Li, high cathode loading and lean electrolyte conditions.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Enhancing Electrochemical Performance of Aluminum‐Oxygen Batteries with Graphene Aerogel Cathode

Zhongqing Zhang,Zhiyu Wang,Jianwei Lu,Jiayin Lyu,Xiangqun Zhuge,Kun Luo,Yurong Ren,Aamir Shahzad,Weiwei Lei,Dan Liu

DOI: https://doi.org/10.1002/smtd.202301225

IF: 12.4

2024-01-27

Small Methods

Abstract:Graphene aerogel by hydrothermal treatment owns excellent mechanical properties and electric conductivity and exhibits good catalytic activity in both oxygen reduction and evolution reactions, which significantly enhances the performance of aluminum‐oxygen batteries. Aluminum‐oxygen batteries (AOBs) own the benefits of high energy density (8.14 kWh kg−1), low cost, and high safety. However, the design of a cathode with high surface area, structure integrity, and good catalytic performance is still challenging for rechargeable AOBs. Herein, the fabrication of a robust self‐supporting cathode using 3D graphene aerogel (3DGA) for rechargeable AOBs is demonstrated. Electroanalysis showed that the 3DGA presented good catalytic activity in both oxygen reduction and evolution reactions, which allowed the AOB to operate for >90 cycles with low overpotentials at a current density of 0.2 mA cm−2, and a high Coulombic efficiency of ca. 99% using ionic liquid as electrolyte. In comparison, the cell with the carbon paper cathode can only cycle for 50 rounds. The excellent cyclic performance can be attributed to the porous structure, large surface area, good electric conductivity, and catalytic activity of the 3DGA, which is prospective to be applied for other metal‐air batteries, fuel cells, and supercapacitors.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
Two-Dimensional F-Ti3C2Tx@Ag Composite for an Extraordinary Long Cycle Lifetime with High Specific Capacity in an Aluminum Battery

Xiaogeng Huo,Bao Zhang,Jianling Li,Xiaoxu Wang,Te Qin,Yu Zhang,Feiyu Kang

DOI: https://doi.org/10.1021/acsami.0c20808

IF: 9.5

2021-01-01

ACS Applied Materials & Interfaces

Abstract:According to the current research, the graphene-like two-dimensional materials present excellent electrochemical performance in aluminum batteries. However, there is less research on emerging two-dimensional materials in aluminum batteries, and the energy storage mechanism is ambiguous. Herein, we modified the two-dimensional few layered Ti3C2Tx (F-Ti3C2Tx) with Ag+ and prepared a composite material F-Ti3C2Tx@Ag. The results of physical characterization show that Ag+ is reduced to Ag by Ti ions and is in situ grown on the surface and interlayer of F-Ti3C2Tx. More importantly, the electrochemical performance of the two-dimensional material F-Ti3C2Tx@Ag is studied in an aluminum battery and shows extraordinary long cycle lifetime with high specific capacity. The discharge specific capacity is about 150 mA h g-1 after 2000 cycles at a current density of 0.5 A g-1. Furthermore, the energy storage mechanism of F-Ti3C2Tx@Ag in aluminum batteries is studied, which shows that it is mainly the intercalation/de-intercalation of [AlCl4]-, accompanied by a small amount of Al3+ intercalating/de-intercalating. In addition, density functional theory (DFT) calculations are carried out to study the interaction between MXene@Ag and [AlCl4]- and between MXene and [AlCl4]-. The results show that [AlCl4]- anions are easier to intercalate/de-intercalate between the layers of Ti3C2O2-Ag.
Advanced Rechargeable Aluminium Ion Battery with a High-Quality Natural Graphite Cathode

Di-Yan Wang,Chuan-Yu Wei,Meng-Chang Lin,Chun-Jern Pan,Hung-Lung Chou,Hsin-An Chen,Ming Gong,Yingpeng Wu,Chunze Yuan,Michael Angell,Yu-Ju Hsieh,Yu-Hsun Chen,Cheng-Yen Wen,Chun-Wei Chen,Bing-Joe Hwang,Chia-Chun Chen,Hongjie Dai

DOI: https://doi.org/10.1038/ncomms14283

IF: 16.6

2017-01-01

Nature Communications

Abstract:Recently, interest in aluminium ion batteries with aluminium anodes, graphite cathodes and ionic liquid electrolytes has increased; however, much remains to be done to increase the cathode capacity and to understand details of the anion–graphite intercalation mechanism. Here, an aluminium ion battery cell made using pristine natural graphite flakes achieves a specific capacity of ∼110 mAh g −1 with Coulombic efficiency ∼98%, at a current density of 99 mA g −1 (0.9 C) with clear discharge voltage plateaus (2.25–2.0 V and 1.9–1.5 V). The cell has a capacity of 60 mAh g −1 at 6 C, over 6,000 cycles with Coulombic efficiency ∼ 99%. Raman spectroscopy shows two different intercalation processes involving chloroaluminate anions at the two discharging plateaus, while C–Cl bonding on the surface, or edges of natural graphite, is found using X-ray absorption spectroscopy. Finally, theoretical calculations are employed to investigate the intercalation behaviour of choloraluminate anions in the graphite electrode.

Ultrafast all-climate aluminum-graphene battery with quarter-million cycle life

Ternary Perovskite Cobalt Titanate/Graphene Composite Material As Long-Term Cyclic Anode for Lithium-Ion Battery

Ultra-small and Highly Crystallized ZnFe2O4 Nanoparticles Within Double Graphene Networks for Super-Long Life Lithium-Ion Batteries

Capacitive charge storage enables an ultrahigh cathode capacity in aluminum-graphene battery

Three-Dimensional Double-Walled Ultrathin Graphite Tube Conductive Scaffold with Encapsulated Germanium Nanoparticles as a High-Areal-Capacity and Cycle-Stable Anode for Lithium-Ion Batteries

An ultrafast rechargeable aluminium-ion battery

Ultrafast Charge and Long Life of High-Voltage Cathodes for Dual-Ion Batteries Via a Bifunctional Interphase Nanolayer on Graphite Particles.

A Novel Three-Dimensional Cathode with Stable Long Cycling Performance for Lithium Oxygen Batteries

Long life exceeding 10 000 cycles for aluminum-ion batteries based on an FeTe2@GO composite as the cathode

Fast-charged aluminum-ion battery with aluminum-graphene nanocomposite anode

An Amorphous Carbon-Graphite Composite Cathode for Long Cycle Life Rechargeable Aluminum Ion Batteries

Unlocking the Lithium Storage Capacity of Aluminum by Molecular Immobilization and Purification

Two-Dimensional F-Ti 3 C 2 T x @Ag Composite for an Extraordinary Long Cycle Lifetime with High Specific Capacity in an Aluminum Battery

Lithium Titanate Tailored by Cathodically Induced Graphene for an Ultrafast Lithium Ion Battery

Enhancing Electrochemical Performance of Aluminum‐ion Batteries with Fluorinated Graphene Cathode

Flexible, binder-free and high-loading graphite paper cathodes for ultra-high capacity and long-life Al-graphite dual-ion batteries

Three-dimensional graphene foam supported Fe₃O₄ lithium battery anodes with long cycle life and high rate capability.

Artificial Graphite Paper as a Corrosion‐Resistant Current Collector for Long‐Life Lithium Metal Batteries

Enhancing Electrochemical Performance of Aluminum‐Oxygen Batteries with Graphene Aerogel Cathode

Two-Dimensional F-Ti3C2Tx@Ag Composite for an Extraordinary Long Cycle Lifetime with High Specific Capacity in an Aluminum Battery

Advanced Rechargeable Aluminium Ion Battery with a High-Quality Natural Graphite Cathode