Abstract:Residual Moisture (RM) in freeze-dried products is one of the most important critical quality attributes (CQAs) to monitor, since it affects the stability of the active pharmaceutical ingredient (API). The standard experimental method adopted for the measurements of RM is the Karl-Fischer (KF) titration, that is a destructive and time-consuming technique. Therefore, Near-Infrared (NIR) spectroscopy was widely investigated in the last decades as an alternative tool to quantify the RM. In the present paper, a novel method was developed based on NIR spectroscopy combined with machine learning tools for the prediction of RM in freeze-dried products. Two different types of models were used: a linear regression model and a neural network based one. The architecture of the neural network was chosen so as to optimize the prediction of the residual moisture, by minimizing the root mean square error with the dataset used in the learning step. Moreover, the parity plots and the absolute error plots were reported, allowing a visual evaluation of the results. Different factors were considered when developing the model, namely the range of wavelengths considered, the shape of the spectra and the type of model. The possibility of developing the model using a smaller dataset, obtained with just one product, that could be then applied to a wider range of products was investigated, as well as the performance of a model developed for a dataset encompassing several products. Different formulations were analyzed: the main part of the dataset was characterized by a different percentage of sucrose in solution (3%, 6% and 9% specifically); a smaller part was made up of sucrose-arginine mixtures at different percentages and only one formulation was characterized by another excipient, the trehalose. The product-specific model for the 6% sucrose mixture was found consistent for the prediction of RM in other sucrose containing mixtures and in the one containing trehalose, while failed for the dataset with higher percentage of arginine. Therefore, a global model was developed by including a certain percentage of all the available dataset in the calibration phase. Results presented and discussed in this paper demonstrate the higher accuracy and robustness of the machine learning based model with respect to the linear models.

From laboratory- to pilot-scale: moisture monitoring in fluidized bed granulation by a novel microwave sensor using multivariate calibration approaches

In-line monitoring of granule moisture in fluidized-bed dryers using microwave resonance technology

Quantitative Analysis of Moisture Content and Particle Size in a Fluidized Bed Granulation Process Using Near Infrared Spectroscopy and Acoustic Emission Combined with Data Fusion Strategies.

Application of in-line near infrared spectroscopy and multivariate batch modeling for process monitoring in fluid bed granulation.

Process Monitoring of Moisture Content and Mass Transfer Rate in a Fluidised Bed with a Low Cost Inline MEMS NIR Sensor

Development of In-Line Measurement Techniques for Monitoring Powder Characteristics in a Multi-Stage Spray Drying Process

Application of Near-Infrared Spectroscopy Combined with Design of Experiments for Process Development of the Pulsed Spray Fluid Bed Granulation Process

Real-time monitoring and fault detection of pulsed-spray fluid-bed granulation using near-infrared spectroscopy and multivariate process trajectories

From Mini to Micro Scale-Feasibility of Raman Spectroscopy as a Process Analytical Tool (PAT)

Proof of a LOD Prediction Model with Orthogonal PAT Methods in Continuous Wet Granulation and Drying

Real-time monitoring of multi-layered film coating processes using Raman spectroscopy

Use of machine learning tools and NIR spectra to estimate residual moisture in freeze-dried products

Mechanistic modeling of semicontinuous fluidized bed drying of pharmaceutical granules by incorporating single particle and bulk drying kinetics

Online measurement of moisture content, moisture distribution, and state of water in corn kernels during microwave vacuum drying using novel smart NMR/MRI detection system

Influence of drying conditions on layer porosity in fluidized bed spray granulation

Study growth kinetics in fluidized bed granulation with at-line FBRM

Cracking the code: Spatial heterogeneity as the missing piece for modeling granular fluidized bed drying

Real-Time Measurement of Moisture Content of Paddy Rice Based on Microstrip Microwave Sensor Assisted by Machine Learning Strategies

Influence of process conditions on the product properties in a continuous fluidized bed spray granulation process

Application of on-line Raman spectroscopy for characterizing relationships between drug hydration state and tablet physical stability

Real-time monitoring of milk powder moisture content during drying in a spouted bed dryer using a hybrid neural soft sensor