Abstract:Rescue robots have been widely used in rescue work with mobility, adaptability, and flexibility. However, during the implementation of rescue tasks, rescue robots are often affected by external impacts, which will result in a significant decrease in the accuracy of the robot's end effector, thereby affecting the efficiency of rescue. Developing an accurate dynamic model is the prerequisite to increase the control efficiency. The present paper presents a novel dynamic modeling method based on the transfer matrix method and analyzes the impact response characterizations of a rescue robot with single and dual flexible manipulators. The rescue robot with a single flexible manipulator is analyzed at the beginning. Firstly, the dynamic model of individual components is established using the transfer matrix method. And the overall model is obtained by iterating the transfer matrices and transfer equations of each component. Secondly, the natural frequency and vibration modes of the system can be determined when the boundary conditions are given. Thirdly, the orthogonality of the augmented eigenvectors of the dynamic model is verified, and the impact response of the end effector was obtained. Finally, an experimental setup was constructed to verify the accuracy of using the multi-body system transfer matrix method for dynamic response analysis. Additionally, this novel approach of dynamic modeling and impact response analysis was applied to the rescue robot with two flexible manipulators, and its effectiveness was evaluated. Overall, the modeling method presented in this paper provides a theoretical basis for further improving the accuracy and reducing the vibration of the end effector of rescue robots.

Dynamics of omnidirectional unmanned rescue vehicle with mecanum wheels

Design, Modeling And Trajectory Generation Of A Kind Of Four Wheeled Omni-Directional Vehicle

A Dynamic Motion Analysis of a Six-Wheel Ground Vehicle for Emergency Intervention Actions

Study On Structural Modeling And Kinematics Analysis Of A Novel Wheel-Legged Rescue Robot

An Omnidirectional Mobile Operating Robot Based On Mecanum Wheel

Dynamics Simulation and Motion Capability Analysis on the Mobile System for Asymmetric Planetary Rover

Dynamics Modeling and Simulation of a Lunar Rover with Six Cylindrical Wheels

Dynamics and Control Study of Rover with Six Wheels Independently Driven

Research on kinematics and dynamics of lunar rover with new configuration

Study on the dynamics and motion capability of the planetary rover with asymmetric mobility system

Kinematic and optimal design of a three-wheeled holonomic omnidirectional robot platform for mobile manipulation tasks

Terramechanics-Based High-Fidelity Dynamics Simulation for Wheeled Mobile Robot on Deformable Rough Terrain

Dynamics modeling and impact response of a rescue robot with two flexible manipulators

The Otbot project: Dynamic modelling, parameter identification, and motion control of an omnidirectional tire-wheeled robot

Kinematic Modeling of a Six-Wheeled Robotic Rover with a Passive/active Suspension

High-Fidelity Dynamic Modeling and Simulation of Planetary Rovers Using Single-Input-Multi-Output Joints with Terrain Property Mapping.

Kinematics modeling and analysis for threewheel omnidirectional mobile robot

Wheel Velocity Analysis of A Rover with Six Wheels Independently Driven on Uneven Terrain

Design and analysis for a multifunctional rescue robot with four-bar wheel-legged structure

Haptic Feedback Remote Control System for Electric Mechanical Assembly Vehicle Developed to Avoid Obstacles

Analytic Solutions for Wheeled Mobile Manipulator Supporting Forces