Abstract:Single-phase lead-zirconate-titanate (PZT) perovskite nanofibers, with \({\text{Pb}}\left({\text{Zr}}_{0.5}{\text{Ti}}_{0.5}\right){\text{O}}_{3}\) composition were synthesized using the electrospinning technique. Poly-vinyl-pyrrolidone (PVP) was used as viscosity controller, size and uniformity of the \({\text{Pb}}\left({\text{Zr}}_{0.5}{\text{Ti}}_{0.5}\right){\text{O}}_{3}\) nanofibers were optimized against different PVP concentrations. The results showed that PVP concentrations play a significant role in the fabrication, homogeneity, uniformity, porosity, and particularly in the diameter of PZT nanofibers. SEM and XRD results revealed the formation of sing-phase \({\text{Pb}}\left({\text{Zr}}_{0.5}{\text{Ti}}_{0.5}\right){\text{O}}_{3}\) nanofibers at 600 °C with an average diameter of ~ 96 nm. The prepared PZT nanofibers exhibited a significantly wide bandgap (~ 3.5 eV) and a high dielectric-constant (~ 1827). The device of single-phase PZT nanofibers was fabricated on interdigitated electrodes to study the current–voltage, impedance spectroscopy, and dielectric characteristics of the PZT nanofibers. The current–voltage characteristics of the fabricated device with PZT nanofibers showed non-ohmic properties. The non-linear I–V characteristics at temperatures between 308 and 408 K indicate two distinct regions. Impedance spectroscopy indicated the presence of non-ideal Debye type behavior in \({\text{Pb}}\left({\text{Zr}}_{0.5}{\text{Ti}}_{0.5}\right){\text{O}}_{3}\) nanofibers and was ascribed to the existence of heterogeneity in the sample. The measured capacitances were assigned to two electro-active regions in the prepared \({\text{Pb}}\left({\text{Zr}}_{0.5}{\text{Ti}}_{0.5}\right){\text{O}}_{3}\) nanofibers. A proto-type piezoelectric nanogenerator based on PZT nanofibers was fabricated to study the piezoelectric properties of \({\text{Pb}}\left({\text{Zr}}_{0.5}{\text{Ti}}_{0.5}\right){\text{O}}_{3}\) nanofibers. PZT nanofibers were aligned on interdigitated electrodes of silver wire, which demonstrated piezoelectric performance and delivered an output voltage of ~ 40 V under periodic stress applications.

Stretchable Electrospun PVDF-HFP/Co-ZnO Nanofibers as Piezoelectric Nanogenerators

Piezoelectric Nanogenerator Based on a Flexible Carbon-Fiber/zno–znse Bilayer Structure Wire

Piezoelectric Energy Harvesting Using Flexible Self-Poled Electroactive Nanofabrics Based on PVDF/ZnO-Decorated SWCNT Nanocomposites

Flexible piezoelectric nanogenerator based on [P(VDF-HFP)]/ PANI-ZnS electrospun nanofibers for electrical energy harvesting

Wearable Electrospun Piezoelectric Mats Based on a PVDF Nanofiber–ZnO@ZnS Core–Shell Nanoparticles Composite for Power Generation

Piezoelectric and Optoelectronic Properties of Electrospinning Hybrid PVDF and ZnO Nanofibers

Supersonically Sprayed Pvdf and Zno Nanoflowers with Built-In Nanocuboids for Wearable Piezoelectric Nanogenerators

Physico-chemical and piezoelectric characterization of electroactive nanofabrics based on functionalized graphene/talc nanolayers/PVDF for energy harvesting

Development of a piezoelectric nanogenerator based on mesoporous silica/zinc oxide hybrid nanocomposite fibres

High piezoelectric flexible electrospun zinc oxide/poly(vinylidene fluoride) composite fibrous membranes

Effect of Zn-Fe2O3 nanomaterials on the phase separated morphologies of polyvinylidene fluoride piezoelectric nanogenerators

Design on orientation of one-dimensional ZnO/P(VDF-HFP) nanocomposites for significant enhanced electromechanical conversion

Electrospun Polyvinylidene Fluoride Nanogenerator with Hydrophobic Properties and Enhanced Energy Harvesting for Wearable and Wireless Sensing

Breathable and Flexible Piezoelectric ZnO@PVDF Fibrous Nanogenerator for Wearable Applications

Fabrication and characterization of $${\text{Pb}}({\text{Zr}}_{0.5}{\text{Ti}}_{0.5}){\text{O}}_{3}$$ nanofibers for nanogenerator applications

Combined Triboelectric and Piezoelectric Effect in ZnO/PVDF Hybrid-Based Fiber-Structured Nanogenerator with PDMS:Carbon Black Electrodes

Hybridizing CNT/PMMA/PVDF towards high-performance piezoelectric nanofibers

Flexible PVDF-TrFE Nanocomposites with Ag-decorated BCZT Heterostructures for Piezoelectric Nanogenerator Applications

Incorporation of ZnO Encapsulated MoS2 to Fabricate Flexible Piezoelectric Nanogenerator and Sensor

Piezoelectric Properties of As-Spun Poly(vinylidene Fluoride)/Multi-Walled Carbon Nanotube/Zinc Oxide Nanoparticle (PVDF/MWCNT/ZnO) Nanofibrous Films

Core-sheath PVDF Hollow Porous Fibers Via Coaxial Wet Spinning for Energy Harvesting