Abstract:Multi-needle water bath electrospinning is one of the most efficient methods to prepare micro-nano fiber composite yarns. The nanofiber structure can be targeted regulated to obtain high performance composite yarns. In order to explore the effect of receiving distance on the structure and properties of micro-nano fiber composite yarns, polyacrylonitrile nanofibers were uniformly coated on silver-coated nylon yarn by four-needle continuous water bath electrospinning method. The electric field distribution at different receiving distances was simulated by ANSYS finite element analysis software, and the effect of electric field distribution on the structure and properties of micro-nano fiber composite yarns were studied. The results indicated that the peak electric field intensity appeared at the tip of the needles and decreased with the increase of receiving distance. The receiving distance was constant, the field intensity was lower when the direction of the centerline of the needle tip was farther away from the tip, but the field intensity at the conductive core yarn was higher than that in the surrounding area (small spikes). The average field intensity of small spikes at 180 mm was only 1/4 of that at 80 mm. When the receiving distance increased within a certain range (100~140 mm), the nanofibers had smooth surface and good separation, nanofibers diameter decreased continuously, and the porosity changed inversely. With the further increase of the receiving distance, the nanofibers gradually bonded, the nanofibers diameter increased, and the porosity changed oppositely. The coating rate of nanofibers showed a decreasing trend, and the mechanical properties of micro-nano composite yarns were improved. When the receiving distance was 100 mm, the porosity reached 38.94%, the breaking force, breaking elongation and breaking strength were 13.71±1.36 cN, 22.76±6.62% and 0.15±0.02 cN·dtex-1, respectively. Considering all factors, the receiving distance of 100 mm is appropriate.

An Investigation into Scalability Production of Ultra-Fine Nanofiber Using Electrospinning Systems

A Machine Learning Approach to Model the Electrospinning Process of Biocompatible Materials

Electrospinning of Ultra-Thin Nanofibers Achieved Through Comprehensive Statistical Study

Finite element method assisted design of needleless electrospinning systems for mass production of polymer nanofibers

The role of 3D electrostatic field in modeling the electrospinning process

Design, development, and experimental setup of near-field electrospinning with a sharp electrode: Influence of procedural parameters on the 3D nanofiber structure

Electrospinning of Nanofibers: Reinventing the Wheel?

Central Composite Design and Response Surface Methodology for Optimizing the Diameter of Electrospun Polyamide-6,6 Nanofiber Mat

Advancing Nanofiber Research: Assessing Nonsolvent Contributions to Structure Using Coaxial Electrospinning

Electrospinning Nanofibers

Scalable electrospinning using a desktop, high throughput, self-contained system

Response Surface Methodology to Explore the Influence Mechanism of Fiber Diameter in a New Multi-Needle Electrospinning Spinneret

Electrospinning research and products: The road and the way forward

Electric field simulation of multi-needle water bath electrospinning and structural properties of SCN/PAN micro-nano fiber composite yarns

Electric field simulation, structure and properties of nanofiber- coated yarn prepared by multi-needle water bath electrospinning

The Effect of Flow Rate on Morphology and Deposition Area of Electrospun Nylon 6 Nanofiber

Mass production of high-quality nanofibers via constructing pre-Taylor cones with high curvature on needleless electrospinning

Investigation of the effects of melt electrospinning parameters on the direct-writing fiber size using orthogonal design

Electrospinning of Polymers, Their Modeling and Applications

Stable Multi-Jet Electrospinning with High Throughput Using the Bead Structure Nozzle

Observation of Electrospinning Behavior of Nanoscale Fibers by a High-Speed Camera