Abstract:Wall-modeled large-eddy simulation (LES) is currently the only affordable technique toward the eddy-resolving simulation of high-Reynolds number wall turbulence. Treatment of near-wall region in LES has drawn much attention in recent studies of wall turbulence and computational fluid dynamics. Traditional wall models typically relate the wall stress to the velocity through prescribed algebraic relations or the thin boundary layer equation. In the present study, we developed a new method for the treatment of near-wall region in LES based on the off-wall boundary conditions. The method combines the minimum flow units [Yin et al., “Prediction of near-wall turbulence using minimal flow unit,” J. Fluid Mech. 841, 654–673 (2018)] and the predictive inner–outer (PIO) model for wall turbulence [Marusic et al., “Predictive model for wall-bounded turbulent flow,” Science 329, 193–196 (2010)]. Fluctuating near-wall velocity field is predicted in real time to supply boundary conditions on the off-wall boundary. This method does not assume any velocity profile of the flow, but rather exploits the well-established universality of near-wall turbulence, and incorporates turbulent structures in the boundary conditions. We derived the expressions of the velocity and the subgrid-scale (SGS) stress boundary conditions in combination with the PIO model, and proved that the modulation effect and the fluctuating part of the SGS stress are not necessary for the off-wall boundary conditions. Through comparisons with other wall models, the current method is found to induce a shorter transition zone in the wall-normal direction. The validity and robustness of the method are verified by the reasonable simulation results of channel flows under different computational parameters.

An Automatic Wall Treatment for Spalart–Allmaras Turbulence Model

A generalised wall function including compressibility and pressure-gradient terms for the Spalart–Allmaras turbulence model

Stress-Equivalent Spalart–Allmaras Wall Model with Local Boundary Conditions for Reynolds-Averaged Navier–Stokes

Wall Boundary Conditions for RANS Modelling of Unidirectional and Oscillatory Boundary-Layer Flows

Performance analysis of various wall treatments of RANS models for prediction of near-wall turbulence transport characteristics of plane wall jet

A dynamic linearized wall model for turbulent flow simulation: towards grid convergence in wall-modeled simulations

A Total-Shear-stress-conserved Wall Model for Large-Eddy Simulation of High-Reynolds Number Wall Turbulence

Robust experimental data assimilation for the Spalart-Allmaras turbulence model

Effect of wall stress models and subgrid-scale models for flow past a cylinder at Reynolds number 3900

An adoption of the Spalart–Allmaras turbulence model for two- and three-dimensional free surface environmental flows

Assessment of Subgrid-Scale Models in Wall-Modeled Large-Eddy Simulations of Turbulent Channel Flows

An OpenFOAM-based evaluation of various wall treatment strategies in simulating separated flows past bluff bodies with heat transfer

Effect of near-wall treatments on airflow simulations

Development of K-R Turbulence Model for Wall -Bounded Flows

Wall modeled large-eddy simulations of flow over the Sandia Axisymmetric Transonic Bump

LES Wall Modeling for Heat Transfer at High Speeds

Implementation and validation of a generalized wall stress function

Effects of turbulence boundary conditions on Spalart-Allmaras RANS simulations for active flow control applications

Off-wall Boundary Conditions for Large-Eddy Simulation Based on Near-Wall Turbulence Prediction

Wall-Modeled Large-Eddy Simulation Method for Unstructured-Grid Navier–Stokes Solvers