New experimental melting properties as access for predicting amino-acid solubility

Yeong Zen Chua,Hoang Tam,Christoph Schick,Dzmitry Zaitsau,Christoph Held,Hoang Tam Do

DOI: https://doi.org/10.1039/c8ra00334c

IF: 4.036

2018-01-01

RSC Advances

Abstract:New experimental melting properties combined with PC-SAFT allow quantitative solubility predictions of amino acids in water.

chemistry, multidisciplinary

What problem does this paper attempt to address?

Melting properties of amino acids and their solubility in water

Yeong Zen Chua,Aarti Kumar,Daniel Pabsch,Moritz Hallermann,Dzmitry Zaitsau,Christoph Schick,Christoph Held,Hoang Tam Do

DOI: https://doi.org/10.1039/d0ra08947h

IF: 4.036

2020-01-01

RSC Advances

Abstract:We report the melting properties of amino acids for the first time and highlight the usefulness of such data to predict material properties such as aqueous solubility of amino acids.

chemistry, multidisciplinary
Modeling the Solvent-Induced Shape-Memory Behavior of Glassy Polymers

Rui Xiao,Thao D. Nguyen

DOI: https://doi.org/10.1039/c3sm51210j

IF: 4.046

2013-01-01

Soft Matter

Abstract:We present a constitutive model for the effect of solvent absorption on the thermomechanical properties and shape-memory behavior of amorphous polymers. The absorption of low concentrations of solvent depresses the glass transition temperature by increasing the molecular mobility of the polymer chains. In a shape-memory application, this can lead to premature shape recovery and significant alterations to the time-dependence and temperature-dependence of shape recovery. We implemented the constitutive model for finite element analysis and developed a computational model that considered the time-dependent effect of diffusion to study the solvent-induced shape-memory behavior of a meth(acrylate) copolymer network. The model was validated by comparing to isothermal shape recovery experiments of specimens in air and water at different temperatures.
A Thermodynamic-Consistent Model for the Thermo-Chemo-Mechanical Couplings in Amorphous Shape-Memory Polymers

Lu Dai,Rui Xiao

DOI: https://doi.org/10.1142/s1758825121500228

IF: 3.5

2021-01-01

International Journal of Applied Mechanics

Abstract:Chemically-responsive amorphous shape-memory polymers (SMPs) can transit from the temporary shape to the permanent shape in responsive to solvents. This effect has been reported in various polymer-solvent systems. However, limited attention has been paid to the constitutive modeling of this behavior. In this work, we develop a fully thermo-chemomechanical coupled thermodynamic framework for the chemically-responsive amorphous SMPs. The framework shows that the entropy, the chemical potential and the stress can be directly obtained if the Helmholtz free energy density is defined. Based on the entropy inequality, the evolution equation for the viscous strain, the temperature and the number of solvent molecules are also derived. We also provide an explicit form of Helmholtz free energy density as an example. In addition, based on the free volume concept, the dependence of viscosity and diffusivity on the temperature and solvent concentration is defined. The theoretical framework can potentially advance the fundamental understanding of chemically-responsive shape-memory effect. Meanwhile, it can also be used to describe other important physical processes such as the diffusion of solvents in glassy polymers.
Thermo-responsive Gels Based on Supramolecular Assembly of an Amidoamine and Citric Acid.

Li Hao,Cengiz Yegin,Jyothsna Varsha Talari,Jun Kyun Oh,Ming Zhang,Mufrettin Murat Sari,Luhong Zhang,Younjin Min,Mustafa Akbulut,Bin Jiang

DOI: https://doi.org/10.1039/c7sm01592e

IF: 4.046

2018-01-01

Soft Matter

Abstract:In this work, we report the formation of a novel, aqueous-based thermo-responsive, supramolecular gelling system prepared by a convenient and efficient self-assembly of a long-chain amino-amide and citric acid. To determine the viscosity behavior and to gain insights into the gelation mechanism, a complementary combination of techniques, including Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), dynamic light scattering (DLS), and sinusoidal oscillatory tests, were used. The supramolecular gelator exhibited remarkably reversible sol-gel transitions induced by temperature at 76 °C. At a concentration of 5 wt%, the zero-frequency viscosity of the supramolecular system increased by about four orders of magnitude (from 4.2 to 12 563 Pa s) by changing the temperature from 23 °C to 76 °C. The viscous nature of the supramolecular gel could be preserved up to 90 °C. The synergistic combination of the hydrogen bonding between amino and carboxylic acid groups and the electrostatic interactions arising from the protonation of the amino-group and the deprotonation of carboxylic acid groups enhanced at higher temperatures is presumably responsible for the thermo-responsive behavior. We anticipate that these supramolecular gelators can be beneficial in various applications such as hydrogel scaffolds for regenerative medicine, personal care products and cosmetics, and enhanced oil recovery as viscosity modifiers.
Sequence-based prediction of the intrinsic solubility of peptides containing non-natural amino acids

Marc Oeller,Ryan J. D. Kang,Hannah L. Bolt,Ana L. Gomes dos Santos,Annika Langborg Weinmann,Antonios Nikitidis,Pavol Zlatoidsky,Wu Su,Werngard Czechtizky,Leonardo De Maria,Pietro Sormanni,Michele Vendruscolo

DOI: https://doi.org/10.1038/s41467-023-42940-w

IF: 16.6

2023-11-17

Nature Communications

Abstract:Abstract Non-natural amino acids are increasingly used as building blocks in the development of peptide-based drugs as they expand the available chemical space to tailor function, half-life and other key properties. However, while the chemical space of modified amino acids (mAAs) such as residues containing post-translational modifications (PTMs) is potentially vast, experimental methods for measuring the developability properties of mAA-containing peptides are expensive and time consuming. To facilitate developability programs through computational methods, we present CamSol-PTM, a method that enables the fast and reliable sequence-based prediction of the intrinsic solubility of mAA-containing peptides in aqueous solution at room temperature. From a computational screening of 50,000 mAA-containing variants of three peptides, we selected five different small-size mAAs for a total number of 37 peptide variants for experimental validation. We demonstrate the accuracy of the predictions by comparing the calculated and experimental solubility values. Our results indicate that the computational screening of mAA-containing peptides can extend by over four orders of magnitude the ability to explore the solubility chemical space of peptides and confirm that our method can accurately assess the solubility of peptides containing mAAs. This method is available as a web server at https://www-cohsoftware.ch.cam.ac.uk/index.php/camsolptm .

multidisciplinary sciences
Empirical Aqueous Solvation Models Based on Accessible Surface Areas with Implicit Electrostatics

Tingjun Hou,Xuebin Qiao,Wei Zhang,Xiaojie Xu

DOI: https://doi.org/10.1021/jp025595u

2002-01-01

Abstract:In the current work, an empirical solvation model based on accessible surface areas was reported, which can be used to predict the solvation free energies for both organic and biological molecules very fast. This solvation model is based on atom-weighted solvent accessible surface area (SAWSA). The parameterization procedure for different kinds of atoms was performed as follows: first, the atoms in a molecule were defined to different atom types based on SMARTS language; then the solvent accessible surface area for each atom (or charged group) was calculated; finally, 4 genetic algorithm (GA) was applied to optimize the solvation parameters for different atom types in order to reproduce the experimental solvation free energies. The derived model possessed promising predictive ability as indicated by the good statistical significance and good prediction on the external test set. Using the solvation model based on all 377 neutral molecules, we have achieved an average unsigned error of 0:51 kcal/mol and standard deviation of 0.46 kcal/mol, which was better than the model proposed by Wang et al. The solvation model developed in the current work was applied to predict the solvation free energies of small organic molecules and proteins. For the,51 small organic molecules, the SAWSA model could give consistent results with the AM1/SM2.1 model in addition to several molecules with large conjugate systems. Moreover, the predictions from SAWSA were much better than those from SM5.0R, a solvation model based on geometry-dependent atom surface tensions. For the IS proteins randomly selected from the Brookhaven PDB database, the solvation free energies predicted by the SAWSA model showed high linear correlation (r = 0.99) than those predicted by PBSA, which were much better than those given by the Ooi model and the Vial model. Finally, we have successfully applied this model to predict the relative binding free energies for four binding modes of EGFR/quinazoline. The most favorable binding mode identified by MM-PBSA could also be correctly recognized by MM-SAWSA. The relative solvation free energies calculated by SAWSA show obvious correlation with those calculated by PBSA. The SAWSA should have potential applications in QSAR, molecular docking, protein folding, free energy calculations, and so forth.
Sequence-based prediction of the solubility of peptides containing non-natural amino acids

Oeller,M.,Kang,R.,Bolt,H.,Gomes dos Santos,A.,Langborg Weinmann,A.,Nikitidis,A.,Zlatoidsky,P.,Su,W.,Czechtizky,W.,De Maria,L.,Sormanni,P.,Vendruscolo,M.

DOI: https://doi.org/10.1101/2023.03.03.530952

2023-03-04

bioRxiv

Abstract:Non-natural amino acids are increasingly used as building blocks in the development of peptide-based drugs, as they expand the available chemical space to tailor function, half-life and other key properties. However, while the chemical space of modified amino acids (mAAs) is potentially vast, experimental methods for measuring the developability properties of mAA-containing peptides are expensive and time consuming. To facilitate developability programs through computational methods, we present CamSol-PTM, a method that enables the fast and reliable sequence-based prediction of the solubility of mAA-containing peptides. From a computational screening of 50,000 mAA-containing variants of three peptides, we selected five different mAAs for a total number of 30 peptide variants for experimental validation. We demonstrate the accuracy of the predictions by comparing the calculated and experimental solubility values. Our results indicate that the computational screening of mAA-containing peptides can extend by over four orders of magnitude the ability to explore the solubility chemical space of peptides. This method is available as a web server at https://www-cohsoftware.ch.cam.ac.uk/index.php/camsolptm.
Probing pharmaceutically important amino acids L-isoleucine and L-tyrosine Solubilities: Unraveling the solvation thermodynamics in diverse mixed solvent systems

Jit Chakraborty,Kalachand Mahali,A.M.A. Henaish,Jahangeer Ahmed,Saad M. Alshehri,Sanjay Roy

DOI: https://doi.org/10.1016/j.bpc.2024.107229

IF: 3.628

2024-03-29

Biophysical Chemistry

Abstract:The study specifically investigates the solubilities of L-isoleucine and L-tyrosine in water-mixed solvent systems (DMF, DMSO, and ACN), exploring the behaviour of amino acids in complex environments. The experimental methods prioritize meticulous solvent purification to ensure reliable results. The work explores solubility data, uncovering temperature-dependent trends and intricate interactions influencing solubility in the chosen mixed solvent systems. The study emphasizes the impact of thermodynamic properties, solvent-solvent interactions, and amino acid structure on solubility patterns. The broader implications highlight the relevance of understanding amino acid behaviour in diverse solvent environments, offering potential applications in cosmetics and pharmaceutical industries. The distinct solubility patterns contribute valuable insights, enhancing on the understanding of the solution stability and interactions of L-isoleucine and L-tyrosine in different solvent systems. In conclusion, work suggests the enhanced utilization of L-isoleucine and L-tyrosine in various industries, driven by a profound understanding of their solubility in mixed solvent systems. The research expands our knowledge of amino acid behaviour, paving the way for advancements in industries relying on protein-based products and technologies.

biochemistry & molecular biology,biophysics,chemistry, physical
Recent advances on aqueous solubility prediction.

Junmei Wang,Tingjun Hou

DOI: https://doi.org/10.2174/138620711795508331

2011-01-01

Combinatorial Chemistry & High Throughput Screening

Abstract:Aqueous solubility is one of the major physiochemical properties to be optimized in drug discovery. It is related to absorption and distribution in the ADME-Tox (Absorption, Distribution, Metabolism, Excretion, and Toxicity). Aqueous solubility and membrane permeability are the two key factors that affect a drug's oral bioavailability. Because of the importance of aqueous solubility, a lot of efforts have been spent on developing reliable models to predict this physiochemical property. Although some progress has been made and a lot of models have been constructed, it is concluded that accurate and reliable aqueous models targeted to predict solubility of drug-like molecules, have not emerged based on the outcome of an aqueous solubility prediction campaign sponsored by Goodman et al. In this review paper, we provide a snapshot of the latest development in the field. The challenges of developing high quality aqueous solubility models as well as the strategies of surmounting those challenges have been discussed. We conclude that the biggest challenge of modeling aqueous solubility is to collect more high quality, unskewed and drug-relevant solubility data which are sufficient diverse to cover most the chemical space of drugs. The second challenge is to develop good descriptors to account for the lattice energy of solvation. In order to develop accurate and predictable in silico solubility models, the key is to collect a sufficient number of high quality experimental data and the suspicious data must be verified. In addition, the molecular descriptors must be relevant to the energies in the solvation process (the lattice energy for crystal packing, the energy of forming cavity in solvent, and the solvation energy), and the models must be carefully cross-validated and evaluated using the external data sets.
Free Energy Perturbation Approach for Accurate Crystalline Aqueous Solubility Predictions

Richard S Hong,Ana V Rojas,Rajni Miglani Bhardwaj,Lingle Wang,Alessandra Mattei,Nathan S Abraham,Kevin P Cusack,M Olivia Pierce,Sayan Mondal,Nada Mehio,Shailendra Bordawekar,Philip R Kym,Robert Abel,Ahmad Y Sheikh

DOI: https://doi.org/10.1021/acs.jmedchem.3c01339

2023-12-14

Abstract:Early assessment of crystalline thermodynamic solubility continues to be elusive for drug discovery and development despite its critical importance, especially for the ever-increasing fraction of poorly soluble drug candidates. Here we present a detailed evaluation of a physics-based free energy perturbation (FEP+) approach for computing the thermodynamic aqueous solubility. The predictive power of this approach is assessed across diverse chemical spaces, spanning pharmaceutically relevant literature compounds and more complex AbbVie compounds. Our approach achieves predictive (RMSE = 0.86) and differentiating power (R2 = 0.69) and therefore provides notably improved correlations to experimental solubility compared to state-of-the-art machine learning approaches that utilize quantum mechanics-based descriptors. The importance of explicit considerations of crystalline packing in predicting solubility by the FEP+ approach is also highlighted in this study. Finally, we show how computed energetics, including hydration and sublimation free energies, can provide further insights into molecule design to feed the medicinal chemistry DMTA cycle.
A Unified Approach to Inferring Chemical Compounds with the Desired Aqueous Solubility

Muniba Batool,Naveed Ahmed Azam,Jianshen Zhu,Kazuya Haraguchi,Liang Zhao,Tatsuya Akutsu

2024-09-06

Abstract:Aqueous solubility (AS) is a key physiochemical property that plays a crucial role in drug discovery and material design. We report a novel unified approach to predict and infer chemical compounds with the desired AS based on simple deterministic graph-theoretic descriptors, multiple linear regression (MLR) and mixed integer linear programming (MILP). Selected descriptors based on a forward stepwise procedure enabled the simplest regression model, MLR, to achieve significantly good prediction accuracy compared to the existing approaches, achieving the accuracy in the range [0.7191, 0.9377] for 29 diverse datasets. By simulating these descriptors and learning models as MILPs, we inferred mathematically exact and optimal compounds with the desired AS, prescribed structures, and up to 50 non-hydrogen atoms in a reasonable time range [6, 1204] seconds. These findings indicate a strong correlation between the simple graph-theoretic descriptors and the AS of compounds, potentially leading to a deeper understanding of their AS without relying on widely used complicated chemical descriptors and complex machine learning models that are computationally expensive, and therefore difficult to use for inference. An implementation of the proposed approach is available at <a class="link-external link-https" href="https://github.com/ku-dml/mol-infer/tree/master/AqSol" rel="external noopener nofollow">this https URL</a>.

Machine Learning,Discrete Mathematics
An Extended Aqueous Solvation Model Based on Atom-Weighted Solvent Accessible Surface Areas: SAWSA V2.0 Model

Tingjun Hou,Wei Zhang,Qin Huang,Xiaojie Xu

DOI: https://doi.org/10.1007/s00894-004-0214-9

IF: 2.172

2004-01-01

Journal of Molecular Modeling

Abstract:A new method is proposed for calculating aqueous solvation free energy based on atom-weighted solvent accessible surface areas. The method, SAWSA v2.0, gives the aqueous solvation free energy by summing the contributions of component atoms and a correction factor. We applied two different sets of atom typing rules and fitting processes for small organic molecules and proteins, respectively. For small organic molecules, the model classified the atoms in organic molecules into 65 basic types and additionally. For small organic molecules we proposed a correction factor of "hydrophobic carbon" to account for the aggregation of hydrocarbons and compounds with long hydrophobic aliphatic chains. The contributions for each atom type and correction factor were derived by multivariate regression analysis of 379 neutral molecules and 39 ions with known experimental aqueous solvation free energies. Based on the new atom typing rules, the correlation coefficient (r) for fitting the whole neutral organic molecules is 0.984, and the absolute mean error is 0.40 kcal mol(-1), which is much better than those of the model proposed by Wang et al. and the SAWSA model previously proposed by us. Furthermore, the SAWSA v2.0 model was compared with the simple atom-additive model based on the number of atom types (NA). The calculated results show that for small organic molecules, the predictions from the SAWSA v2.0 model are slightly better than those from the atom-additive model based on NA. However, for macromolecules such as proteins, due to the connection between their molecular conformation and their molecular surface area, the atom-additive model based on the number of atom types has little predictive power. In order to investigate the predictive power of our model, a systematic comparison was performed on seven solvation models including SAWSA v2.0, GB/SA_1, GB/SA_2, PB/SA_1, PB/SA_2, AM1/SM5.2R and SM5.0R. The results showed that for organic molecules the SAWSA v2.0 model is better than the other six solvation models. For proteins, the model classified the atoms into 20 basic types and the predicted aqueous free energies of solvation by PB/SA were used for fitting. The solvation model based on the new parameters was employed to predict the solvation free energies of 38 proteins. The predicted values from our model were in good agreement with those from the PB/SA model and were much better than those given by the other four models developed for proteins.
Choline chloride and amino acid solutions taste and hydration behavior with experimental thermodynamic properties and COSMO-PC-SAFT calculation

Mohammad Amin Morsali,Behrang Golmohammadi,Hemayat Shekaari

DOI: https://doi.org/10.1038/s41598-024-70275-z

2024-09-02

Abstract:Aqueous amino acid solutions have been introduced as dietary supplements for both animals and humans. This study investigates the physicochemical properties of the solutions containing amino acids (L-glycine, D,L-alanine, L-proline), choline chloride, and water at temperature range of 288.15 to 318.15 K. The results show that increasing concentrations of amino acids and choline chloride lead to higher solution densities. Analysis of apparent molar volume (Vφ) and apparent molar isentropic compressibility (κφ) reveals that Vφ values increase with choline chloride concentration and temperature, indicating enhanced solute-solvent interactions, while κφ values decrease, suggesting increased solution compression. Thermodynamic analysis using the Redlich-Mayer model and COSMO-based modeling provides insights into molecular interactions. However, COSMO-based parameters show high average relative deviation percentage (ARD %) values, indicating poor predictive performance for the density of these systems. In contrast, the ePC-SAFT equation of state effectively predicts the densities, particularly for L-proline-based solutions, which show very low ARD % values, indicating high accuracy. The ePC-SAFT model also performs reasonably well for L-glycine solutions but shows poorer results for D,L-alanine-based solutions. The study also examines the sweetness and saltiness criteria (ASV and ASIC) of these solutions. The ASV values, which serve as a sweetness criterion, are higher than the ideal range of 0.5 < ASV < 0.7, suggesting an overly sweet taste. The ASIC values follow a similar trend, indicating increased saltiness. To achieve an appropriate grade of sweetness and saltiness, dilution to lower concentrations of the solution is recommended. Furthermore, the use of choline chloride is found to increase salt intake and enhance the taste of salt, which can be beneficial in amino acid supplements used in animal food.
Solution Thermodynamics of L-Glutamic Acid Polymorphs from Finite-Sized Molecular Dynamics Simulations

Matteo Salvalaglio,Fabienne Bachtiger,Lunna Li,Aliff Rahimee

DOI: https://doi.org/10.26434/chemrxiv-2024-v335b

2024-07-09

Abstract:Efficiently obtaining atomic-scale thermodynamic parameters characterizing crystallization from solution is key to developing the modeling strategies needed in the quest for digital design strategies of industrial crystallization processes. Based on the thermodynamics of crystal nucleation in confined solutions, we develop a simulation framework to efficiently estimate the solubility and surface tension of organic crystals in solution from a few unbiased molecular dynamics simulations at a reference temperature. We then show that such a result can be extended with minimal computational overhead to capture the whole solubility curve. This enables an efficient and self-consistent estimate of the solubility and limit of solution stability associated with crystal nucleation in molecular systems from equilibrium molecular dynamics without requiring sophisticated free energy calculations. We apply our analysis to investigate the relative thermodynamics stability and aqueous solubility of the α and β polymorphs of L-Glutamic acid. Our analysis enables an efficient appraisal of emergent ensemble properties associated with the thermodynamics of nucleation from solutions against experimental data, demonstrating that while the absolute solubility is still far from being quantitatively captured by an off-the-shelf point charge transferable forcefield, the relative polymorphic stability and solubility obtained from finite temperature simulation are consistent with the experimentally available information on glutamic acid. We foresee the ability to efficiently obtain solubility information from a limited number of computational experiments as a key component of high-throughput computational polymorph screenings.

Chemistry
Salt Response and Rheological Behavior of Acrylamide-Sulfobetaine Copolymer

Tao Ye,Yihu Song,Qiang Zheng

DOI: https://doi.org/10.1007/s00396-015-3790-6

2015-01-01

Abstract:Sulfobetaine 3-[N,N-dimethyl-N-(2-methacryloxylethyl)ammonio]-propane sulfonate (DMAPS) was used to copolymerize with acrylamide (AM) to prepare salt-sensitive copolymers. According to salt-in effects at the same chloride anion investigated using turbidimetric titration method, dissolution of the copolymer is related to cations, following the order of Al3+ > Mg2+ > Ca2+ > Na+ ~ K+ > Li+. It was found that the electrostatic shielding effect rather than the acid-base interaction was the major reason for the salt-in effect. The salt expansion effect, monitored by intrinsic viscosity under given ionic strengths (I), exhibited an efficiency sequence of cations differing from the salt-in effect. Both single molecule and intermolecular aggregation were found in even dilute solution. Expansion of single molecules and aggregates and breakdown and reformation of aggregates by hydrophobic interaction can be seen as I increases. These conformation changes were used to explain the rheological behavior of copolymer in dilute, semi-dilute, and concentrated solutions (or suspensions).
Aqueous Solvation Models Based on Accessible Surface Area Calculations

TJ Hou,XJ Xu

DOI: https://doi.org/10.3866/pku.whxb20021119

2002-01-01

Abstract:An empirical solvation model based on atom-weighted accessible surface areas was reported. This solvation model is based on atom-weighted solvent accessible surface area (SAWSA). The parameterization procedure for different kind of atoms was performed as follows: firstly, the atoms in a molecule were defined to different atom types based on SMARTS language; then, solvent accessible surface area for each atom was calculated; finally, a genetic algorithm (GA) was applied to optimize the solvation parameters for different atom types. The SAWSA model was applied to predict the aqueous salvation free energies for 18 proteins. The solvation free energies predicted by the SAWSA model show high linear correlation (r = 0.99) with those predicted by PB/SA. The calculated results indicate that the SAWSA model bears significant predicted ability to small organic molecules and proteins.
Solid-state Packing Dictates the Unexpected Solubility of Aromatic Peptides.

Santu Bera,Xuewei Dong,Bankala Krishnarjuna,Shannon A. Raab,David A. Hales,Wei Ji,Yiming Tang,Linda J. W. Shimon,Ayyalusamy Ramamoorthy,David E. Clemmer,Guanghong Wei,Ehud Gazit

DOI: https://doi.org/10.1016/j.xcrp.2021.100391

IF: 8.9

2021-01-01

Cell Reports Physical Science

Abstract:The understanding and prediction of the solubility of biomolecules, even of the simplest ones, reflect an open question and unmet need. Short aromatic tripeptides are among the most highly aggregative biomolecules. However, in marked contrast, Ala-Phe-Ala (AFA) was surprisingly found to be non-aggregative and could be solubilized at millimolar concentrations. Here, aiming to uncover the underlying molecular basis of its high solubility, we explore in detail the solubility, aggregation propensity, and atomic-level structure of the tripeptide, We demonstrate an unexpectedly high water solubility of AFA reaching 672 mM, two orders of magnitude higher than reported previously. The single crystal structure reveals an anti-parallel beta sheet conformation devoid of any aromatic interactions. This study provides clear mechanistic insight into the structural basis of solubility and suggests a simple and feasible tool for its estimation, bearing implications for design of peptide drugs, peptides materials, and advancement of peptide nanotechnology.
Molecular simulations of the effects of substitutions on the dissolution properties of amorphous cellulose acetate

Ying-Xian Shi,Shen-Hui Li,Zhi-Ping Zhao

DOI: https://doi.org/10.1016/j.carbpol.2022.119610

IF: 10.723

2022-05-12

Carbohydrate Polymers

Abstract:The dissolution behavior of cellulose acetate (CA) is an extremely important property in its extensive applications and preparation of derivatives. In this paper, we proposed a molecular model building strategy to construct amorphous CA with various substituent distributions (different degrees of substitution and substitution positions). A protocol combing molecular dynamics simulation and density functional theory (DFT) was applied to systematically investigate the dissolution behavior of CAs, and the structural properties of CAs. The reduced cohesive energy and polarity of CAs caused by the increase in substituents would enhance its solubility. The interaction of solvent molecules and CAs and the diffusion of solvent molecules in CAs have a synergistic effect on the dissolution of CAs. The diffusion coefficient is the primary factor affecting the solubility. Moreover, substituents at different positions of the anhydroglucose units along the CAs chains would produce different steric hindrance effects, which in turn affect the dissolution behavior.

polymer science,chemistry, organic, applied
Thermodynamic studies for improving the prediction of CO2 equilibrium solubility in aqueous 2-dimethylamino-2-methyl-1-propanol

Rui Zhang,Xinwei He,Tianzi Liu,Min Xiao,Hao Ling,Xiayi Hu,Xiaowen Zhang,Feiying Tang,Chao''en Li,He''an Luo

DOI: https://doi.org/10.1016/j.seppur.2022.121292

IF: 8.6

2022-08-15

Separation and Purification Technology

Abstract:In this work, CO2 equilibrium solubility in aqueous 2-(dimethylamino)-2-methyl-1-propanol (2DMA2M1P) solution was investigated by varying temperature, CO2 partial pressure and amine concentration. Dissociation constant (pKa) and CO2 absorption heat of 2DMA2M1P were calculated. Results show that the CO2 equilibrium solubility increases with the CO2 partial pressure but decreases with the increase of temperature. It was also revealed that the CO2 equilibrium solubility declines when the concentration of 2DMA2M1P increases from 1 to 2 mol/L. In addition, a new extended Cf model was proposed for predicting the CO2 equilibrium solubility, and the predicted results show a good agreement with the experimental measured data with an average absolute deviation (AAD) of 2.08%. Furthermore, the proposed model was validated with the published data of tertiary amines, and the results indicate that the developed model has a good universality in predicting the CO2 equilibrium solubility. Finally, a comparison with other reported amines was also made in terms of the CO2 equilibrium solubility and the CO2 absorption heat. All of them proved that the 2DMA2M1P could be a competitive amine solvents for CO2 capture.

engineering, chemical
A streamlined molecular-dynamics workflow for computing solubilities of molecular and ionic crystals

Aleks Reinhardt,Pin Yu Chew,Bingqing Cheng

DOI: https://doi.org/10.1063/5.0173341

2023-08-22

Abstract:Computing the solubility of crystals in a solvent using atomistic simulations is notoriously challenging due to the complexities and convergence issues associated with free-energy methods, as well as the slow equilibration in direct-coexistence simulations. This paper introduces a molecular-dynamics workflow that simplifies and robustly computes the solubility of molecular or ionic crystals. This method is considerably more straightforward than the state-of-the-art, as we have streamlined and optimised each step of the process. Specifically, we calculate the chemical potential of the crystal using the gas-phase molecule as a reference state, and employ the S0 method to determine the concentration dependence of the chemical potential of the solute. We use this workflow to predict the solubilities of sodium chloride in water, urea polymorphs in water, and paracetamol polymorphs in both water and ethanol. Our findings indicate that the predicted solubility is sensitive to the chosen potential energy surface. Furthermore, we note that the harmonic approximation often fails for both molecular crystals and gas molecules at or above room temperature, and that the assumption of an ideal solution becomes less valid for highly soluble substances.

Statistical Mechanics,Materials Science,Chemical Physics,Computational Physics

New experimental melting properties as access for predicting amino-acid solubility

Melting properties of amino acids and their solubility in water

Modeling the Solvent-Induced Shape-Memory Behavior of Glassy Polymers

A Thermodynamic-Consistent Model for the Thermo-Chemo-Mechanical Couplings in Amorphous Shape-Memory Polymers

Thermo-responsive Gels Based on Supramolecular Assembly of an Amidoamine and Citric Acid.

Sequence-based prediction of the intrinsic solubility of peptides containing non-natural amino acids

Empirical Aqueous Solvation Models Based on Accessible Surface Areas with Implicit Electrostatics

Sequence-based prediction of the solubility of peptides containing non-natural amino acids

Probing pharmaceutically important amino acids L-isoleucine and L-tyrosine Solubilities: Unraveling the solvation thermodynamics in diverse mixed solvent systems

Recent advances on aqueous solubility prediction.

Free Energy Perturbation Approach for Accurate Crystalline Aqueous Solubility Predictions

A Unified Approach to Inferring Chemical Compounds with the Desired Aqueous Solubility

An Extended Aqueous Solvation Model Based on Atom-Weighted Solvent Accessible Surface Areas: SAWSA V2.0 Model

Choline chloride and amino acid solutions taste and hydration behavior with experimental thermodynamic properties and COSMO-PC-SAFT calculation

Solution Thermodynamics of L-Glutamic Acid Polymorphs from Finite-Sized Molecular Dynamics Simulations

Salt Response and Rheological Behavior of Acrylamide-Sulfobetaine Copolymer

Aqueous Solvation Models Based on Accessible Surface Area Calculations

Solid-state Packing Dictates the Unexpected Solubility of Aromatic Peptides.

Molecular simulations of the effects of substitutions on the dissolution properties of amorphous cellulose acetate

Thermodynamic studies for improving the prediction of CO2 equilibrium solubility in aqueous 2-dimethylamino-2-methyl-1-propanol

A streamlined molecular-dynamics workflow for computing solubilities of molecular and ionic crystals