Abstract:In this study, one of the commonly used MXene (Ti3C2Tx) and β nucleated isotactic polypropylene (β-iPP)/MXene composites of different compositions were fabricated. The effects of MXene on non-isothermal crystallization and polymorphic behavior of β-iPP/MXene composites were comparatively studied. The non-isothermal crystallization kinetics indicates that for all samples, the lower cooling rates promote composites to crystallize at higher temperatures. When MXene and β-Nucleating agent (β-NA) are added separately, the crystallization temperature of composites shifts towards higher temperatures at all cooling rates. When MXene and β-NA are added simultaneously, the composite shows different cooling rate dependence, and the effects of improving crystallization temperatures is more obvious under rapid cooling. The activation energy of four samples iPP, iPP/MXene, iPP/β-NA, and iPP/MXene/β-NA were −167.5, −185.5, −233.8, and −218.1 kJ/mol respectively, which agree with the variation tendency of crystallization temperatures. The polymorphic behavior analysis obtained from Differential Scanning calorimetry (DSC) is affected by two factors: the ability to form β-crystals and the thermal stability of β-crystals. Because β-crystals tend to recrystallize to α-crystals below a critical temperature, to eliminate the effect of β-α recrystallization, the melting curves at end temperatures Tend = 50 °C and Tend = 100 °C are comparatively studied. The results show that more thermally unstable β-crystals would participate in β-α recrystallization with higher cooling rates. Moreover, thermal stability of β-crystals is improved by adding MXene. To further verify these findings, samples of three different thermal conditions were synthesized and analyzed by DSC, X-Ray Diffraction (XRD), and Polarized Light Optical Microscopy (PLOM), and the results were consistent with the above findings. New understandings of synthesizing β-iPP/MXene composites with adjustable morphologies and polymorphic behavior were proposed.

Effect of a novel compound nucleating agent calcium sulfate whisker/β-nucleating agent dicyclohexyl-terephthalamide on crystallization and melting behavior of isotactic polypropylene

Investigation on the Effects of MXene and Β-Nucleating Agent on the Crystallization Behavior of Isotactic Polypropylene

Exploring the Effects of MXene on Nonisothermal Crystallization and Melting Behavior of Β-Nucleated Isotactic Polypropylene

Influence of compounded α/β-nucleating agents on the crystallization behavior and mechanical properties of isotactic polypropylene

Isothermal Crystallization Behaviors of Isotactic Polypropylene with Ultrasonically‐modified Calcium Sulfate Whisker As Β‐nucleating Agent

Effect Of Beta-Nucleating Agents On Crystallization And Melting Behavior Of Isotactic Polypropylene

Sonochemical Activation Calcium Sulfate Whisker with Enhanced Beta-Nucleating Ability for Isotactic Polypropylene

Crystallization Behavior and Morphological Development of Isotactic Polypropylene with an Aryl Amide Derivative As Β-Form Nucleating Agent Part B Polymer Physics

Crystallization Behavior and Melting Characteristics of Isotactic Polypropylene Nucleated by a Novel Nucleating Agent

Effect of a smectic liquid crystal polymer as new β-nucleating agent on crystallization structure, melting, and rheological behavior of isotactic polypropylene

Effects of melt structure on crystallization behavior of isotactic polypropylene nucleated with α/β compounded nucleating agents

Non-isothermal crystallization behavior of polypropylene with nucleating agents and nano-calcium carbonate

Effects Of Melt Structure On Crystallization Behavior Of Isotactic Polypropylene Nucleated With Alpha/Beta Compounded Nucleating Agents

Morphology Evolution of Aryl Amide Derivative Tmb5 As Beta-Form Nucleating Agent and Its Effect on the Crystallization of Isotactic Polypropylene

Effects of nucleating agent 1,3,5-benzenetricarboxylic acid tris(cyclohexylamide) on properties and crystallization behaviors of isotactic polypropylene

Synthesis and Effect Ofn,n'-Diphenylterephthalamide on Crystallization of Isotactic Polypropylene

Combined Effect of Β-Nucleating Agent and Multi-Walled Carbon Nanotubes on Polymorphic Composition and Morphology of Isotactic Polypropylene

Influence Of A Novel Beta-Nucleating Agent On The Structure, Mechanical Properties, And Crystallization Behavior Of Isotactic Polypropylene

Mechanistic Insights into the Shear Effects on Isotactic Polypropylene Crystallization Containing Β-Nucleating Agent

Effect of Final Heating Temperature on Crystallization of Isotactic Polypropylene Nucleated with an Aryl Amide Derivative As Β -Form Nucleating Agent

Temperature‐dependent Selective Crystallization Behavior of Isotactic Polypropylene with a Β‐nucleating Agent