Abstract:Recently, photocurable coatings are being used frequently. However, it is worth mentioning that the use of photopolymerization has its drawbacks, especially in the case of curing coatings on three-dimensional surfaces and in places that are difficult to access for UV radiation. However, it is possible to develop a system in which UV technology and thermal methods for curing coatings can be combined. Moreover, the obtained resins are derived from low-viscosity epoxy resins or diglycidyl ethers, making them an ideal building material for photopolymerization-based three-dimensional printing techniques. Due to the need to improve this method, a series of epoxy (meth)acrylates containing both epoxy and (meth)acrylate groups were obtained via the addition of acrylic or methacrylic acid to epoxy resin, diglycydylether of bisphenol A epoxy resin (DGEBA), cyclohexane dimethanol diglycidyl ether (CHDMDE) and neopentyl glycol diglycidyl ether (NPDE). The structures of the synthesized copolymers were confirmed through spectroscopic analysis (FTIR) and studied regarding their nonvolatile matter content (NV) and acid values (PAVs), as well as their epoxy equivalent values (EEs). Due to the presence of both epoxy and double carbon-carbon pendant groups, two distinct mechanisms can be applied: cationic and radical. Hence, the obtained resins can be cured using UV radiation with thermally appropriate conditions and initiators. This type of method can be used as a solution to many problems currently encountered in using UV technology, such as failure to cure coatings in underexposed areas as well as deformation of coatings. Synthesized epoxy (meth)acrylate prepolymers were employed to formulate photocurable coating compositions. Furthermore, the curing process and properties of cured coatings were investigated regarding some structural factors and parameters. Among the synthesized materials, the most promising are those based on epoxy resin, characterized by their high glass transition temperature values and satisfactory functional properties.

State of the Art in Dual-Curing Acrylate Systems

Dual-Curing Epoxy Thermosets: Design, Curing, Properties and Applications

Rheological and Mechanical Characterization of Dual-Curing Thiol-Acrylate-Epoxy Thermosets for Advanced Applications

An Analysis of Photopolymerization Kinetics and Stress Development in Multifunctional Acrylate Coatings

Simultaneous Measurement of Polymerization Kinetics and Stress Development in Radiation-Cured Coatings: A New Experimental Approach and Relationship between the Degree of Conversion and Stress

Synthesis and Study of Novel UV-Curable Powder Coatings

Synthesis and Curing of a Novel Combined Liquid Crystalline Epoxy

Dual-Curing Polymer Systems for Photo-Curing 3D Printing

Insights on Chemical Reactions and Formation Process of Electron Beam-Cured Acrylic Networks

Dual‐wavelength vat photopolymerization 3D printing with hybrid acrylate‐epoxy resins: influence of resin composition on microstructure and mechanical properties

Photocurable Epoxy Acrylate Coatings Preparation by Dual Cationic and Radical Photocrosslinking

Dual-Curable Epoxy-Amine Thermosets: Influence of Stoichiometry and Ratio between Hardeners on Thermal and Thermomechanical Properties

Epoxy (Meth)acrylate-Based Thermally and UV Initiated Curable Coating Systems

A Comparative Study on 3D Printed Silicone-Epoxy/acrylate Hybrid Polymers Via Pure Photopolymerization and Dual-Curing Mechanisms

Progress in the development of acrylic resin-based powder coatings – an overview

Development of Dual-curing Thermoset Materials using a Novel UV-initiated Mechanism Suitable for 3D Printing Applications

UV-Assisted Direct Ink Writing of Dual-Cure Polyurethanes

LED-Cured Reflection Gratings Stored in an Acrylate-Based Photopolymer

Highly stretchable dual‐cure photosensitive resin for digital light processing printing

Accelerated Photocuring of Acrylate Resins with WS 2 Nanoparticles

Acrylic resins with oxetane pendant groups for free radical and cationic dual-curing photoresists