Abstract:Recycling phosphorus from waste streams for fertilization purposes could contribute to a sustainable society. The production in the pulp and paper industry results in several waste streams, among others nutrient-rich sludges in different forms. This study presents a detailed chemical and 3D characterization of ash from co-combustion of bark and two types of sludges from a paper mill; mixed sludge and biosludge. The combustion performance was investigated for these experiments and advanced analysis methods were used to characterise the ashes to correlate chemical and physical properties relevant for nutrient recycling. The elemental composition was determined by energy-dispersive X-ray spectroscopy; dominating crystalline phases by X-ray diffraction; and morphology, porosity, pore size distribution and active surface area of the slag were analysed with synchrotron-based X-ray micro-tomography and image analysis. Slag was formed in all combustion experiments to a large extent with increasing amounts with a higher proportion of sludge. Nutrient amounts indicate that slag particles from co-combustion of both biosludge and mixed sludge can be useful either as a soil improvement directly or for recovery processes. Slag from combustion of 30 wt% biosludge and 70 wt% bark contained the highest amount of phosphorus, 9 at % on a C and O free basis. Evaluation of tomography data showed that discrete and open pores could be distinguished on a micrometre scale. The porosity of the slag varied between the replicates and fuel mixtures, on average between 17 and 23 vol% for the bark and sludge mixtures. Open pore volume displayed large variations, on average 39–56 vol% of the pores were open pores connected to the surrounding volume. For all samples, 90 % of the pores were small, with an equivalent diameter under 30 μm, but the largest pore volume (80–90 %) consists of pores with an equivalent diameter over 75 μm. In soils, pores with a minimum equivalent diameter over 30 μm generally transmit water and the smaller pores store water. The slag particles have relatively thick walls, with few pore openings to the surroundings, indicating that the slag needs to be pre-treated by milling or crushing before application in the soil.

Agglomeration of Ash-Based Fertilizer Mixtures from Biomass Combustion and Digestate

Wood Ash Based Treatment of Anaerobic Digestate: State-of-the-Art and Possibilities

Recent innovations in fertilization with treated digestate from food waste to recover nutrients for arid agricultural fields

Effects of Wood Ash-Based Alkaline Treatment on Nitrogen, Carbon, and Phosphorus Availability in Food Waste and Agro-Industrial Waste Digestates

Phosphorus-Rich Ash from Poultry Manure Combustion in a Fluidized Bed Reactor

Ash Transformation during Fixed-Bed Co-combustion of Sewage Sludge and Agricultural Residues with a Focus on Phosphorus

Sustainable Use of Biochar, Poultry and Cattle Manure for the Production of Organic Granular Fertilizers

Recycling and optimization of poultry manure incineration ash as a source of phosphorus and balanced mineral fertilization

Characterisation of ash particles from co-combustion of bark and sludges from pulp and paper industry

INVESTIGATION OF PHYSICAL-MECHANICAL PROPERTIES AND IMPACT ON SOIL OF GRANULATED MANURE COM-POST FERTILIZERS

Processing of nuisance animal waste into agricultural products

Sugarcane bagasse ash as fertilizer for soybeans: Effects of added residues on ash composition, mineralogy, phosphorus extractability and plant availability

Sewage sludge as a fuel and raw material for phosphorus recovery: Combined process of gasification and P extraction

Evaluation of Agricultural Residues as Organic Green Energy Source Based on Seabuckthorn, Blackberry, and Straw Blends

Enhancement of the Plant‐Accessible Phosphate Fraction in Sewage Sludge Ashes by Na+ or K+ Addition Prior to Combustion

Evaluation of the Properties and Usefulness of Ashes from the Corn Grain Drying Process Biomass

Wood Biomass Ash (WBA) from the Heat Production Process as a Mineral Amendment for Improving Selected Soil Properties

Ash Behaviour during Combustion of Agropellets Produced by an Agro-Industry—Part 2: Chemical Characterization of Sintering and Deposition

Experimental Study on Ash Morphology, Fusibility, and Mineral Transformation During Co-Combustion of Antibiotic Filter Residue and Biomass

Transformation of technogenic waste based on water treatment sludge into granulated fertilizer

Thermochemical equilibrium study of ash transformation during combustion and gasification of sewage sludge mixtures with agricultural residues with focus on the phosphorus speciation