Abstract:In the field of civil aviation, the nose landing gear is a critical component that is prone to damage during taxiing. With the advent of new technologies such as towing taxi-out and hub motors, the nose landing gear faces increasingly complex operational environments, thereby imposing higher performance demands. Ensuring the structural safety of the nose landing gear is fundamental for the successful application of these technologies. However, current research on aircraft nose landing gear under these new conditions is somewhat lacking, particularly in terms of reliable analysis models for real-world scenarios. This study focuses on a typical Class C aircraft, specifically the B-727 model, for which a finite element model of the nose landing gear is developed. Modal testing of the aircraft's nose landing gear is conducted using the impact hammer method, and the results are compared with those from the simulations. The experimental data indicate that the error range for the first seven natural frequencies is between 0.23% and 9.27%, confirming the high accuracy of the developed landing gear model. Furthermore, with towing taxi-out as the primary scenario, a dynamic model of the aircraft towing system is established, and an analysis on the structural strength and topological optimization of the nose landing gear under various conditions, including high speeds and heavy loads, is performed. The results show that the developed model can effectively support the analysis and prediction of the mechanical behavior of the nose landing gear. Under high-speed, heavy-load conditions, the nose landing gear experiences significantly increased loads, with the maximum deformation primarily occurring at the lower section of the shock strut's outer cylinder. However, no damage occurred. Additionally, under these conditions, an optimized structural design for the landing gear was identified, which, while ensuring structural strength, achieves a 22.32% reduction in the mass of the outer cylinder, also ensuring safety in towing taxi-out conditions.

Optimization of an Oleo-Pneumatic Shock Absorber for Main Landing Gear of a Commercial Aircraft

Optimization of landing gear under consideration of vibration comfort for civil aircraft

Calculation of the Passenger Aircraft Landing Gear Shock Absorption System Exposed to Impact Loading

Shock Absorber Leakage Impact on Aircraft Lateral Stability During Ground Handling Maneuvers

Synthesis of landing dynamics on land-base high performance aircraft considering multi-variate landing conditions

Design, structure analysis and shock control of aircraft landing gear system with MR damper

Multi-Objective Optimization Design of an Origami-Inspired Combined Cushion Airbag

Crashworthiness Design Optimization for an Evtol Aircraft.

Design and Analysis of Medium Utility Aircraft Landing Gear

Design and dynamic analysis of landing gear system in vertical takeoff and vertical landing reusable launch vehicle

Landing Impact Load Analysis and Validation of a Civil Aircraft Nose Landing Gear

Stress Analysis of Landing Gear of Boeing 747-400 Aircraft

Optimization of the gas-liquid damper pin in the aircraft landing gear

Optimization of the resource characteristics of the main landing gear support of An-type aircraft

Stress analysis of Landing gear of light Unmanned Aerial Vehicle

SIMULATION OF LARGE CIVIL AIRCRAFT LANDING RESPONSE UNDER CONSIDERATIONS OF FLEXIBLE AIRFRAME

Improved Multi-Body Dynamic Simulation of Landing Gear Drop Test Incorporating Structural Flexibility and Bearing Contact

Structural Strength Analysis and Optimization of Commercial Aircraft Nose Landing Gear under Towing Taxi-Out Conditions Using Finite Element Simulation and Modal Testing

Stress Distribution Analysis using ANSYS of the Nose Landing Gear of STOL Aircrafts Considering Runway Gradient: A Simulation Study

A step towards safety: Material failure analysis of landing gear

Optimization of Landing Gear Mechanism using Generative Design