Abstract:There are intrinsic phase errors in swept source optical coherence tomography (SS-OCT), which severely influences the functional imaging. To overcome this difficulty, a numerical correction method is presented in this paper to correct the phase artifacts due to wavenumber shift among the spectral interferograms, resulting from the random delay variance between the sampling trigger and the clock of the swept source laser. This correction method is based on the linear relationship of phase difference to the depth of the sample and the wavenumber shift. The detailed procedure to eliminate the phase artifacts is as follows. Firstly, we figure out the complex OCT signals through inverse Fourier transform of the initial interferograms. Then we fit the upper surface of the sample with the intensity information of the B-scan by setting a floating threshold. After that the wavenumber shifts of each A-line are determined by two steps with the phase information of the sample surface: the relative wavenumber shifts between adjacent A-lines are first obtained according to the phase difference between the adjacent A-lines, the signal depth, and the linear relationship mentioned above; then we figure out the absolute wavenumber shifts between each A-line and the first A-line of the B-scan by an iteration algorithm. With the information about the wavenumber shift, we align the initial interferograms, and obtain the corrected complex signal through re-inverse Fourier transform of the aligned interferograms. This method introduces no extra noise, realizing phase measurement limited by the signal-to-noise ratio. It is noted that we take the average phase information of several axial pixels near the sample surface to diminish the noise influence when calculating the wavenumber shifts. Besides, this corrected algorithm acquires oversampling along the scanning direction to ensure the signal correlation between adjacent A-lines. The SS-OCT system in the paper is set up with a vertical cavity surface emitting laser with a center wavelength of 1297 nm. The system measurement range is 12 mm in lateral direction, the axial resolution is 17 mu m, and the lateral resolution is 24 mu m. And the feasibility of this method is verified by Doppler imaging of a mirror, an infra-red detection card and the cerebral cortex of a mouse.

Balanced detection for spectral-domain optical coherence tomography with fiber-based phase shifter

An Absolute Wavenumber Calibration Method Based on Characteristic Spectral Line and Constrained Fitting Phase

Phase Detection from Two Phase-Shifting Interferograms

Full-field optical coherence tomography in a balanced detection mode.

Ultralong-range phase imaging with orthogonal dispersive spectral-domain optical coherence tomography.

Spectral-domain optical coherence tomography with dual-balanced detection for auto-correlation artifacts reduction.

Sensitivity enhancement in swept-source optical coherence tomography by parametric balanced detector and amplifier.

Phase correction method based on interfacial signal in swept source optical coherence tomography

Evaluation of Signal Degradation Due to Birefringence in a Multiple Reference Optical Coherence Tomography System With Polarization-Based Balanced Detection

A Method of Fast Locating Discrete Interface Based on Phase Information of Complex Master-Slave Optical Coherence Tomography

Full-depth Spectral Domain Optical Coherence Tomography Technology Insensitive to Phase Disturbance.

Phase Demodulation Based on DCM Algorithm in Φ-OTDR with Self-Interference Balance Detection

Phase stable swept-source optical coherence tomography with active mode-locking laser for contrast enhancements of retinal angiography

Achromatic Phase Shifter Implemented in Full-Field Optical Coherence Tomography

Transmissive RSOD for Balance Detection Based OCT

Systematic dispersion compensation for spectral domain optical coherence tomography using time-frequency analysis and iterative optimization for iridocorneal angle imaging

Bidirectional Coupler Study for Chip-Based Spectral-Domain Optical Coherence Tomography

Dual-Channel Spectral Domain Optical Coherence Tomography Based on a Single Spectrometer Using Compressive Sensing.

Phase Alignment of an Array Optical Telescope System Using Balanced Detection

Versatile Full-Field Optical Coherence Tomography with Adjustable Transmission-to-Reflection Ratio and Enhanced Signal-to-Noise Ratio

Development of a Non-Uniform Discrete Fourier Transform Based High Speed Spectral Domain Optical Coherence Tomography System.