Abstract:Sintering behaviour of ashes from combustion of coal and biomass blends was experimentally investigated with a focus on the effect of ash preparation method. Blends of a Chinese anthracite, Jincheng coal, and two biomass materials, a wheat straw and a pine sawdust, respectively, were subjected to three different ash preparation procedures, namely, a low temperature oxygen plasma ashing device operating at ca 150 degrees C, combustion in a Muffle furnace at 815 degrees C and in a drop tube furnace at 1500 degrees C. The resulting ash samples were then subjected to the sintering temperature measurement using a pressure-drop sintering device, morphological and mineralogical characterisation using scanning electron microscope (SEM) fitted with X-ray energy dispersive spectroscopy (EDS) and X-ray diffractometry analyser (XRD), respectively. For the same coal and biomass blends but different ash preparation methods, the sintering temperatures were always the lowest for the ash samples from the plasma ashing device and the highest from drop tube furnace. SEM imaging showed that the texture of ash samples from the plasma ashing device was irregular, loose and more fibrous, indicating little interactions among the different mineral and inorganic constituents in the individual fuels. The muffle furnace and drop tube furnace ashes were denser and more uniform in shape as the mineral matter and inorganics became fused together. In addition, the drop tube furnace ashes were mostly in spherical-shape, indicating ash melting had occurred during combustion. The XRD analysis revealed that different minerals were present in the ash samples due to different ash preparation temperatures, with high temperature minerals present in the drop tube furnace ash. Biomass addition in the blends lowered the sintering temperature of corresponding ash; the higher the proportion of biomass in the blend, the lower the ash sintering temperature regardless the ashing method. At the same biomass addition ratio, the ash sintering temperature of the blend with the wheat straw addition was lower than that with the pine sawdust addition, because the wheat straw had a higher K and Cl content but lower Ca than the pine sawdust. The EDS and XRD analyses confirmed that the ashes of coal/wheat straw blends contained more K-bearing minerals, while the ashes of the coal/pine sawdust contained more Ca and K-bearing minerals. Both Ca and K-bearing minerals reacted with other minerals in the ash to form low temperature eutectics, leading to the reduction of sintering temperatures of the coal and biomass blends. However, the melting points of the K-containing minerals are higher than the Ca-containing minerals, therefore, the sintering temperatures of ash with the wheat straw addition were lower than those with the pine sawdust addition. (C) 2016 Elsevier Ltd. All rights reserved.

Effect of minerals and binders on particulate matter emission from biomass pellets combustion

Role of Minerals in the Evolution of Fine Particulate Matter During Pulverized Coal Combustion

Ultrafine Particle Formation in Pulverized Coal, Biomass, and Waste Combustion: Understanding the Relationship with Flame Synthesis Process

Control of Pollutants in the Combustion of Biomass Pellets Prepared with Coal Tar Residue As a Binder

Ultrafine particulate matter formation in the early stage of pulverized coal combustion of high-sodium lignite

Experiment research on utilization of particle biomass fuel in sintering process

Effect of Ash Preparation Method on the Sintering Characteristics of Ashes from Combustion of Coal and Biomass Blends

Reductions in Emissions of Carbonaceous Particulate Matter and Polycyclic Aromatic Hydrocarbons from Combustion of Biomass Pellets in Comparison with Raw Fuel Burning.

Effects of torrefaction on ash-related issues during biomass combustion and co-combustion with coal. Part 1: Elemental partitioning and particulate matter emission

Experimental Study on Combustion Behaviors and Carbon Monoxide Emission Characteristics of Single Coal Pellets

Impact of Dilution Ratio and Burning Conditions on the Number Size Distribution and Size-Dependent Mixing State of Primary Particles from Domestic Solid Fuel Burning

Emission of metals from pelletized and uncompressed biomass fuels combustion in rural household stoves in China.

Characterization of Fine and Carbonaceous Particles Emissions from Pelletized Biomass-Coal Blends Combustion: Implications on Residential Crop Residue Utilization in China

Pollutant Emissions and Oxidative Potentials of Particles from the Indoor Burning of Biomass Pellets

Experimental Investigation on Fine Particle Formation in Ammonia/Biomass Co-combustion

Reduced Pollutant Emissions and Slagging Rate of Biomass Pellet Combustion by Optimizing the Multilayer Distribution of Secondary Air

Mitigation of particulate matter emissions from co-combustion of rice husk with cotton stalk or cornstalk

Experimental study on PM10 formation characteristics of co-combustion with pulverized coal and sludge

Reducing the central mode particulate matter in coal combustion by additives: Impacts of nano Al2O3 and TiO2 addition

Experimental Study on PM_(10),PM_(2.5),PM_1 Emission Features Influenced by Different Conditions in Pulverized Coal Combustion

Performance Evaluation of Biomass Pretreated by Demineralization and Torrefaction for Ash Deposition and PM Emissions in the Combustion Experiments