Energy level alignment of dipolar interface layer in organic and hybrid perovskite solar cells

Kyung-Geun Lim,Soyeong Ahn,Tae-Woo Lee

DOI: https://doi.org/10.1039/c8tc00166a

IF: 6.4

2018-01-01

Journal of Materials Chemistry C

Abstract:The energy-level adjustment of the dipolar interface layer in organic solar cells and hybrid perovskite solar cells is elucidated by interface dipole moments.

materials science, multidisciplinary,physics, applied

What problem does this paper attempt to address?

Organic Solar Cells: A New Interconnecting Layer of Metal Oxide/Dipole Layer/Metal Oxide for Efficient Tandem Organic Solar Cells (adv. Energy Mater. 17/2015)

Shunmian Lu,Xing Guan,Xinchen Li,Wei E. I. Sha,Fengxian Xie,Hongchao Liu,Jiannong Wang,Fei Huang,Wallace C. H. Choy

DOI: https://doi.org/10.1002/aenm.201570096

IF: 27.8

2015-01-01

Advanced Energy Materials

Abstract:In article number 1500631, Fei Huang, Wallace C. H. Choy, and co-workers address one of the main electrical issues of the interconnecting layer (ICL) in tandem organic solar cells by introducing a dipole material to modify the counter-diode barrier between the hole transport layer (HTL) and the electron transport layer (ETL). This strategy contributes towards a general method to combine other HTL and ETL as the effective ICL.
Energy‐Level Alignment at the Organic/Electrode Interface in Organic Optoelectronic Devices

Zhanhao Hu,Zhiming Zhong,Yawen Chen,Chen Sun,Fei Huang,Junbiao Peng,Jian Wang,Yong Cao

DOI: https://doi.org/10.1002/adfm.201503420

IF: 19

2015-01-01

Advanced Functional Materials

Abstract:It is commonly believed that the work‐function reduction effect of the cathode interfacial material in organic electronic devices leads to better energy‐level alignment at the organic/electrode interface, which enhances the device performance. However, there is no agreement on the exact dipole direction in the literature. In this study, a peel‐off method to reveal the buried organic/metal interface to examine the energy‐level alignment is developed. By splitting the device at different interfaces, it is discovered that oppositely oriented dipoles are formed at different surfaces of the interfacial layer. Moreover, the function of the electrode interface differs in different device types. In organic light‐emitting diodes, the vacuum‐level alignment generally occurs at the organic/cathode interface, while in organic photovoltaic devices, the Fermi‐level pinning commonly happens. Both are determined by the integer charge‐transfer levels of the organic materials and the work‐function of the electrode. As a result, the performance enhancement by the cathode interfacial material in organic photovoltaic devices cannot be solely explained by the energy‐level alignment. The clarification of the energy‐level alignment not only helps understand the device operation but also sets up a guideline to design the devices with better performance.
Universal Energy Level Tailoring of Self-Organized Hole Extraction Layers in Organic Solar Cells and Organic–inorganic Hybrid Perovskite Solar Cells

Kyung-Geun Lim,Soyeong Ahn,Young-Hoon Kim,Yabing Qi,Tae-Woo Lee

DOI: https://doi.org/10.1039/c5ee03560k

IF: 32.5

2016-01-01

Energy & Environmental Science

Abstract:Tailoring the interface energetics between a polymeric hole extraction layer (HEL) and a photoactive layer (PAL) in organic photovoltaics (OPVs) and organic–inorganic hybrid perovskite solar cells (PrSCs) is very important to maximize open circuit voltage (Voc), power conversion efficiency (PCE), and device lifetime.
Tuning the Energy Level Offset between Donor and Acceptor with Ferroelectric Dipole Layers for Increased Efficiency in Bilayer Organic Photovoltaic Cells

Bin Yang,Yongbo Yuan,Pankaj Sharma,Shashi Poddar,Rafal Korlacki,Stephen Ducharme,Alexei Gruverman,Ravi Saraf,Jinsong Huang

DOI: https://doi.org/10.1002/adma.201104509

IF: 29.4

2012-02-13

Advanced Materials

Abstract:Ultrathin ferroelectric polyvinylidene fluoride (70%)-tetrafluoroethylene (30%) copolymer film is inserted between the poly3(hexylthiophene) (P3HT) donor and [6,6]-phenyl-C61-butyric acid methylester (PCBM) acceptor layers as the dipole layer to tune the relative energy levels, which can potentially maximize the open circuit voltage of bilayer organic solar cells. In this work, the power conversion efficiency of P3HT/PCBM bilayer solar cells is demonstrated to be doubled with the inserted dipoles.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Electronic Level Alignment in Inverted Organometal Perovskite Solar Cells

Philip Schulz,Luisa L. Whittaker-Brooks,Bradley A. MacLeod,Dana C. Olson,Yueh-Lin Loo,Antoine Kahn

DOI: https://doi.org/10.1002/admi.201400532

IF: 5.4

2015-03-25

Advanced Materials Interfaces

Abstract:The measured energy diagram for inverted cell architectures for perovskite photovoltaic devices is presented. Band offsets are determined in direct and inverse photoemission spectroscopy. The perovskite films assume a slightly p‐type characteristic on top of NiO and show good energetic alignment to adjacent organic electron transport layers. The finding explains the function of inverted devices and gives guidelines for optimization.

materials science, multidisciplinary,chemistry
Energy Level Alignment at Interfaces in Metal Halide Perovskite Solar Cells

Shenghao Wang,Takeaki Sakurai,Weijia Wen,Yabing Qi

DOI: https://doi.org/10.1002/admi.201800260

IF: 5.4

2018-01-01

Advanced Materials Interfaces

Abstract:The rapid progress of organic–inorganic metal halide perovskite solar cells (PSCs) has attracted broad interest in photovoltaic community. A typical PSC consists of anode/cathode, a perovskite layer as absorber, and carrier transport layer(s) (electron/hole transport layer(s)), which are stacked together, resulting in multi‐interfaces between these layers. Charge extraction and transport in these solar cell devices are strongly influenced by the interfaces and in particular the energy level alignment (ELA). It is the synergy of multiple interfaces and bulk films embedded in the cell architecture that has led to the extraordinary success of PSCs. Here, the authors review the progress of the studies on energy level alignment in PSCs, including several sections: methods for deriving ELA, semiconductor type of perovskite, bottom layer–dependent energy level shift of perovskite, density of states–governed ELA, ELA for specific interfaces, instability‐induced ELA variation, and defects and ion migration–induced ELA variation. Perspective and outlook for precisely determining ELA, designing the device architecture, and fabricating high performance PSCs are discussed.
Interfacial Dipole in Organic and Perovskite Solar Cells

Qi Chen,Cheng Wang,Yaowen Li,Liwei Chen

DOI: https://doi.org/10.1021/jacs.0c07439

IF: 15

2020-09-22

Journal of the American Chemical Society

Abstract:Incorporating a dipole interlayer has been one of the most crucial interfacial engineering strategies in organic and perovskite solar cells. An interfacial dipole brings steep shifts in electronic band structure across interfaces and thus effectively tunes charge carrier transport. However, the origin of the interfacial dipole and its effects on device performance are not entirely clear; they are even controversial in some cases. We devote this Perspective to identifying the electric dipole of various interlayers and correlating the interfacial dipole with device performance on the basis of classical semiconductor device theory. It is important to further consider the chemical nature of interlayers beyond the simplified model of an interfacial dipole to develop a full understanding of interfacial structure, energy bands, and device operation mechanism. Researchers are encouraged to integrate in situ and in operando characterizations with numerical simulations in future studies.This article has not yet been cited by other publications.

chemistry, multidisciplinary
Organic Semiconductor Interfaces and Their Effects in Organic Solar Cells

Chuanfei Wang,Weidong Li,Qi Zeng,Xianjie Liu,Fahlman Mats,Qinye Bao

DOI: https://doi.org/10.1002/cjoc.202300347

IF: 5.56

2023-08-05

Chinese Journal of Chemistry

Abstract:Energy levels and energy level alignment at interfaces play a decisive role in designing efficient and stable organic solar cells (OSCs). In this review two usually used technologies in organic photovoltaic communities for measuring energy levels of organic semiconductors, photoelectron spectroscopy and electrochemical methods, are introduced, and the relationships between the values obtained from the corresponding techniques are compared. The energy level and energy level alignment across the interfaces involved in solution processed organic photovoltaics are described, and the corresponding integer charge transfer model for predicting and explaining energy level alignment are presented. The effects of the interface properties in designing efficient binary and ternary OSCs were discussed. The effects of environmental factors mainly including water vapor, oxygen gas and thermal annealing on energy levels and energy level alignment involved in photoactive layers, and the subsequent effects on the corresponding OSC properties are given. This article is protected by copyright. All rights reserved.

chemistry, multidisciplinary
Thickness‐Dependent Energy‐Level Alignment at the Organic–Organic Interface Induced by Templated Gap States

Jan Hagenlocher,Katharina Broch,Matthias Zwadlo,Daniel Lepple,Jonathan Rawle,Francesco Carla,Satoshi Kera,Frank Schreiber,Alexander Hinderhofer

DOI: https://doi.org/10.1002/admi.202101382

IF: 5.4

2021-12-17

Advanced Materials Interfaces

Abstract:Planar organic heterostructures are widely explored and employed in photovoltaic cells, light‐emitting diodes, and bilayer field‐effect transistors. An important role for device performance plays the energy level alignment at the inorganic–organic and organic–organic interfaces. In this work, incremental ultraviolet photoelectron spectroscopy measurements and real‐time X‐ray scattering experiments are used to thoroughly investigate the thickness‐dependent electronic and structural properties of a perfluoropentacene (PFP)‐on‐[6]phenacene heterostructure. For both materials an incremental increase of the material work function (positive interface dipole) is found. For [6]phenacene, this can be assigned to a thickness‐dependent change of molecular arrangement evident from a change of the unit cell volume and a consequential alteration of the ionization energy. In the case of PFP the interface dipole stems from charge transfer from the substrate into unoccupied molecular orbitals resulting in an electrostatic potential on the surface. The magnitude of this potential can be correlated with an increased gap state density resulting from templated structural defects mediated by the bottom layer. The energy‐level alignment at inorganic/organic and organic/organic interfaces is of fundamental importance for device functionality and efficiency. Combining real‐time X‐ray scattering techniques and incremental ultraviolet photoelectron spectroscopy, structural parameters can be connected to electronic properties in prototypical heterostructures dependent on film thickness. The data suggests that additional electronic states resulting from structural defects are a key factor controlling the energy‐level alignment.

materials science, multidisciplinary,chemistry
Dipolar Interlayers in Perovskite Solar Cells

Guiqiang Wang,Dongsheng Wang,Jiarun Chang,Fanning Meng,Wanchun Xiang

DOI: https://doi.org/10.1002/solr.202300481

IF: 9.1726

2023-01-01

Solar RRL

Abstract:A typical perovskite solar cell (PSC) is composed of a perovskite layer, electron/hole transport layer(s), cathode, and anode, producing several interfaces between these functional layers. These interfaces undoubtedly have great influence on the device performance. Introducing the dipolar interlayer is one of the most significant interface engineering strategies in PSCs, which helps to improve the charge extraction and collection and has made critical contribution to the fast development of PSC technology. Herein, the progress in the use of dipolar interlayers to promote the performance of PSCs is summarized. The dipolar interlayers in PSCs based on the device structure are categorized and the effect of each type of dipolar interlayer on the interface energy-level structure, interface charge transport and recombination, the interface defect passivation, perovskite morphology, and the device performance is discussed. A perspective on how to develop more effective dipolar interlayer materials and further enhancing the device performance from the viewpoint of the interface and dipolar interlayers is given.
Probing the Energy Level Alignment and the Correlation with Open-Circuit Voltage in Solution-Processed Polymeric Bulk Heterojunction Photovoltaic Devices

Qing-Dan Yang,Ho-Wa Li,Yuanhang Cheng,Zhiqiang Guan,Taili Liu,Tsz-Wai Ng,Chun-Sing Lee,Sai-Wing Tsang

DOI: https://doi.org/10.1021/acsami.5b11395

2016-03-23

Abstract:Energy level alignment at the organic donor and acceptor interface is a key to determine the photovoltaic performance in organic solar cells, but direct probing of such energy alignment is still challenging especially for solution-processed bulk heterojunction (BHJ) thin films. Here we report a systematic investigation on probing the energy level alignment with different approaches in five commonly used polymer:[6,6]-phenyl-C71-butyric acid methyl ester (PCBM) BHJ systems. We find that by tuning the weight ratio of polymer to PCBM the electronic features from both polymer and PCBM can be obtained by photoemission spectroscopy. Using this approach, we find that some of the BHJ blends simply follow vacuum level alignment, but others show strong energy level shifting as a result of Fermi level pinning. Independently, by measuring the temperature-dependent open-circuit voltage (VOC), we find that the effective energy gap (Eeff), the energy difference between the highest occupied molecular orbital of the polymer donor (EHOMO-D) and lowest unoccupied molecular orbital of the PCBM acceptor (ELUMO-A), obtained by photoemission spectroscopy in all polymer:PCBM blends has an excellent agreement with the extrapolated VOC at 0 K. Consequently, the photovoltage loss of various organic BHJ photovoltaic devices at room temperature is in a range of 0.3-0.6 V. It is believed that the demonstrated direct measurement approach of the energy level alignment in solution-processed organic BHJ will bring deeper insight into the origin of the VOC and the corresponding photovoltage loss mechanism in organic photovoltaic cells.
Effect of High Dipole Moment Cation on Layered 2D Organic–Inorganic Halide Perovskite Solar Cells

Shunquan Tan,Ning Zhou,Yihua Chen,Liang Li,Guilin Liu,Pengfei Liu,Cheng Zhu,Jiuzhou Lu,Wentao Sun,Qi Chen,Huanping Zhou

DOI: https://doi.org/10.1002/aenm.201803024

IF: 27.8

2019-01-01

Advanced Energy Materials

Abstract:Layered 2D organic-inorganic hybrid perovskite is appearing as a rising star in the photovoltaic field, thanks to its superior moisture resistance by the organic spacer cations. Unfortunately, these cations lead to high exciton binding energy in the 2D perovskites, which suffers from lower efficiency in the devices. It thus requires a clear criterion to select/design appropriate organic spacer cations to improve the device efficiency based on this class of materials. Here, 2,2,2-trifluoroethylamine (F(3)EA(+)) is introduced to combine with butylammonium (BA(+)) cations as mixed spacers. While BA(+) enables self-assembly of 2D perovskite crystals by van der Waals interaction, the introduction of F(3)EA(+) spacers with a high dipole moment suppress nonradiative recombination and promote separation of photogenerated electron-hole pairs by taking the advantage of electronegativity of fluorine. The resultant solar cells based on [(BA)(1-x)(F(3)EA)(x)](2)(MA)(3)Pb4I13 exhibit substantially increased open circuit voltage and fill factor compared with that of (BA)(2)(MA)(3)Pb4I13. The champion [(BA)(0.94)(F(3)EA)(0.06)](2)(MA)(3)Pb4I13 solar cell yields a power conversion efficiency of 12.51%, which is among the best performances so far. These findings suggest an effective strategy to design organic spacer cations in layered perovskite for solar cells and other optoelectronic applications.
Mapping the energy level alignment at donor/acceptor interfaces in non-fullerene organic solar cells

Xian’e Li,Qilun Zhang,Jianwei Yu,Ye Xu,Rui Zhang,Chuanfei Wang,Huotian Zhang,Simone Fabiano,Xianjie Liu,Jianhui Hou,Feng Gao,Mats Fahlman,Xian’e Li,Qilun Zhang,Jianwei Yu,Ye Xu,Rui Zhang,Chuanfei Wang,Huotian Zhang,Simone Fabiano,Xianjie Liu,Jianhui Hou,Feng Gao,Mats Fahlman

DOI: https://doi.org/10.1038/s41467-022-29702-w

IF: 16.6

2022-04-19

Nature Communications

Abstract:Abstract Energy level alignment (ELA) at donor (D) -acceptor (A) heterojunctions is essential for understanding the charge generation and recombination process in organic photovoltaic devices. However, the ELA at the D-A interfaces is largely underdetermined, resulting in debates on the fundamental operating mechanisms of high-efficiency non-fullerene organic solar cells. Here, we systematically investigate ELA and its depth-dependent variation of a range of donor/non-fullerene-acceptor interfaces by fabricating and characterizing D-A quasi bilayers and planar bilayers. In contrast to previous assumptions, we observe significant vacuum level (VL) shifts existing at the D-A interfaces, which are demonstrated to be abrupt, extending over only 1–2 layers at the heterojunctions, and are attributed to interface dipoles induced by D-A electrostatic potential differences. The VL shifts result in reduced interfacial energetic offsets and increased charge transfer (CT) state energies which reconcile the conflicting observations of large energy level offsets inferred from neat films and large CT energies of donor - non-fullerene-acceptor systems.

multidisciplinary sciences
Intrinsic Dipole Arrangement to Coordinate Energy Levels for Efficient and Stable Perovskite Solar Cells

Yutong Wu,Bohong Chang,Lian Wang,Hui Li,Lu Pan,Zhen Liu,Longwei Yin

DOI: https://doi.org/10.1002/adma.202300174

IF: 29.4

2023-03-08

Advanced Materials

Abstract:Despite great progress in perovskite photovoltaics, it should be noted that the intrinsic disorder dipolar cations in organic‐inorganic hybrid perovskites exert negative effects on the energy band structure as well as the carrier separation and transfer dynamics. However, oriented polarization achieved by applying an external electric field may cause irreversible damage to perovskites. Herein, a unique and efficient strategy is developed to modulate the intrinsic dipole arrangement in perovskite films for high‐performance and stable perovskite solar cells (PSCs). The spontaneous reorientation of dipolar cation MA+ is triggered by a polar molecule, constructing a vertical polarization during crystallization regulation. The oriented dipole determines a gradient energy‐level arrangement in PSCs and more favorable energetics at interfaces, effectively enhancing the built‐in electric field and suppressing the nonradiative recombination. Besides, the dipole reorientation induces a local dielectric environment to remarkably reduce exciton binding energy, leading to an ultralong carrier diffusion length of up to 1708 nm. Accordingly, the n‐i‐p PSCs achieve a significant increase in power conversion efficiency, reaching 24.63% with negligible hysteresis and exhibiting outstanding stabilities. This strategy also provides a facile route to eliminate the mismatched energetics and enhance carrier dynamics for other novel photovoltaic devices. This article is protected by copyright. All rights reserved

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Energy Band Alignment in Operando Inverted Structure P3HT:PCBM Organic Solar Cells

Qi Chen,Fengye Ye,Junqi Lai,Pan Dai,Shulong Lu,Changqi Ma,Yanfei Zhao,Yi Xie,Liwei Chen

DOI: https://doi.org/10.1016/j.nanoen.2017.08.050

IF: 17.6

2017-01-01

Nano Energy

Abstract:Inverted structure thin-film organic solar cells (OSCs) are becoming increasingly important as they deliver higher power conversion efficiency and demonstrate better long-term stability than conventional devices. However, the energy band alignment and the built-in field across the device, which are crucial in understanding the device operation, is yet to be directly characterized. Here we present a direct visualization of the energy level alignment in operando inverted structure poly(3-hexylthiophene) (P3HT): [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) OSCs using cross-sectional scanning Kelvin probe microscopy. The raw data of measured energy level alignment appear to be inconsistent with each other, and sometimes can even be contradictory to the device polarity observed in current density-voltage measurements. It is identified to be caused by the tip/cantilever induced convolution effect, which may severely mask abrupt energy level offsets at the thin electrode interlayers. A numerical deconvolution method is devised to quantitatively recover the energy level alignment across the device, and reveals the non-uniform electric field distribution in photoactive layer.
Photophysical pathways in efficient bilayer organic solar cells: The importance of interlayer energy transfer

Song Yi Park,Sreelakshmi Chandrabose,Michael B. Price,Hwa Sook Ryu,Tack Ho Lee,Yun Seop Shin,Ziang Wu,Woojin Lee,Kai Chen,Shuixing Dai,Jingshuai Zhu,Peiyao Xue,Xiaowei Zhan,Han Young Woo,Jin Young Kim,Justin M. Hodgkiss

DOI: https://doi.org/10.1016/j.nanoen.2021.105924

IF: 17.6

2021-06-01

Nano Energy

Abstract:The development of organic photovoltaic (OPV) cells has long been guided by the idea that excitons – bound electron-hole pairs created by light absorption – diffuse only 5–10 nm. True for many materials, this constraint led to an inherently complex device architecture – the bulk heterojunction – that has obscured our understanding of device physics, and handicapped rational material design. Here, we investigate the photophysics of a series of planar bilayer heterojunction devices incorporating fused-ring electron acceptors with power conversion efficiencies up to 11%. Using ultrafast optical spectroscopy, we demonstrate the importance of long-range layer-to-layer energy transfer in planar structures, isolating this effect by including an insulating layer between the donor and acceptor layers to eliminate charge transfer effects. We show that the slab geometry facilitates substantially longer-range energy transfer than between isolated molecules or small domains. Along with high molecular packing densities, high absorption coefficients, and long exciton diffusion lengths, we show that these effects amount to exciton harvesting length scales that match the light absorption lengths and thereby enable efficient bilayer devices. Our quantitative analysis of bilayer structures also accounts for large domain sizes in bulk-heterojunction devices including fused-ring electron acceptors, and it quantifies the importance of strong resonant spectral overlap is for material selection and design for highly efficient OPVs.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Recent Advances in Interface Engineering for Planar Heterojunction Perovskite Solar Cells

Wei Yin,Lijia Pan,Tingbin Yang,Yongye Liang

DOI: https://doi.org/10.3390/molecules21070837

IF: 4.6

2016-01-01

Molecules

Abstract:Organic-inorganic hybrid perovskite solar cells are considered as one of the most promising next-generation solar cells due to their advantages of low-cost precursors, high power conversion efficiency (PCE) and easy of processing. In the past few years, the PCEs have climbed from a few to over 20% for perovskite solar cells. Recent developments demonstrate that perovskite exhibits ambipolar semiconducting characteristics, which allows for the construction of planar heterojunction (PHJ) perovskite solar cells. PHJ perovskite solar cells can avoid the use of high-temperature sintered mesoporous metal oxides, enabling simple processing and the fabrication of flexible and tandem perovskite solar cells. In planar heterojunction materials, hole/electron transport layers are introduced between a perovskite film and the anode/cathode. The hole and electron transporting layers are expected to enhance exciton separation, charge transportation and collection. Further, the supporting layer for the perovskite film not only plays an important role in energy-level alignment, but also affects perovskite film morphology, which have a great effect on device performance. In addition, interfacial layers also affect device stability. In this review, recent progress in interfacial engineering for PHJ perovskite solar cells will be reviewed, especially with the molecular interfacial materials. The supporting interfacial layers for the optimization of perovskite films will be systematically reviewed. Finally, the challenges remaining in perovskite solar cells research will be discussed.
Interfacial Charge Transfer Anisotropy in Polycrystalline Lead Iodide Perovskite Films

Jun Yin,Daniele Cortecchia,Anurag Krishna,Shi Chen,Nripan Mathews,Andrew C Grimsdale,Cesare Soci

DOI: https://doi.org/10.1021/acs.jpclett.5b00431

2015-04-16

Abstract:Solar cells based on organic-inorganic lead iodide perovskite (CH3NH3PbI3) exhibit remarkably high power conversion efficiency (PCE). One of the key issues in solution-processed films is that often the polycrystalline domain orientation is not well-defined, which makes it difficult to predict energy alignment and charge transfer efficiency. Here we combine ab initio calculations and photoelectron spectroscopy to unravel the electronic structure and charge redistribution at the interface between different surfaces of CH3NH3PbI3 and typical organic hole acceptor Spiro-OMeTAD and electron acceptor PCBM. We find that both hole and electron interfacial transfer depend strongly on the CH3NH3PbI3 surface orientation: while the (001) and (110) surfaces tend to favor hole injection to Spiro-OMeTAD, the (100) surface facilitates electron transfer to PCBM due to surface delocalized charges and hole/electron accumulation at the CH3NH3PbI3/organic interfaces. Molecular dynamic simulations indicate that this is due to strong orbital interactions under thermal fluctuations at room temperature, suggesting the possibility to further improve charge separation and extraction in perovskite-based solar cells by controlling perovskite film crystallization and surface orientation.
High-Mobility p-Type Organic Semiconducting Interlayer Enhancing Efficiency and Stability of Perovskite Solar Cells.

Mingyu Zhang,Jiayu Wang,Liang Li,Guanhaojie Zheng,Kuan Liu,Meng Qin,Huanping Zhou,Xiaowei Zhan

DOI: https://doi.org/10.1002/advs.201700025

IF: 15.1

2017-01-01

Advanced Science

Abstract:A high-mobility p-type organic semiconductor based on benzodithiophene and diketopyrrolopyrrole with linear alkylthio substituents (BDTS-2DPP) is used as a dual function interfacial layer to modify the interface of perovskite/2,2',7,7'-tetrakis(N,N'-di-p-methoxyphenylamine)-9,9'-spirobifluorene in planar perovskite solar cells. The BDTS-2DPP layer can remarkably passivate the surface defects of perovskite through the formation of Lewis adduct between the under-coordinated Pb atoms in perovskite and S atoms in BDTS-2DPP, and also shows efficient hole extraction and transfer properties. The devices with BDTS-2DPP interlayer show a peak power conversion efficiency of 18.2%, which is higher than that of reference devices without the BDTS-2DPP interlayer (16.9%). Moreover, the hydrophobic BDTS-2DPP interlayer effectively protects the perovskite against moisture, leading to enhanced device stability.
Suppressing Hole Accumulation Through Sub‐Nanometer Dipole Interfaces in Hybrid Perovskite/Organic Solar Cells for Boosting Near‐Infrared Photon Harvesting

Min‐Ho Lee,Min Seok Kim,Yu Jin Lee,Byeongsu Kim,Ju‐Hyeon Kim,Chungryeol Lee,Jihyung Lee,Dong‐Jun Kim,Hyunseok Ko,Masoud Darvish Ganji,Kwanghee Lee,Woojae Kim,Jung‐Yong Lee

DOI: https://doi.org/10.1002/adma.202411015

IF: 29.4

2024-10-01

Advanced Materials

Abstract:In hybrid perovskite/organic solar cells (HSCs), the interface between the perovskite and organic bulk‐heterojunction (BHJ) is carefully engineered with dipole interfacial layers (DILs). These DILs form strong interfacial dipoles, effectively reducing energy barriers and suppressing hole accumulation. Additionally, DILs enhance near‐infrared photon harvesting and charge transport, boosting efficiency to 24.0% and achieving stability of 1200 h under extreme moisture conditions. The potential of hybrid perovskite/organic solar cells (HSCs) is increasingly recognized owing to their advantageous characteristics, including straightforward fabrication, broad‐spectrum photon absorption, and minimal open‐circuit voltage (VOC) loss. Nonetheless, a key bottleneck for efficiency improvement is the energy level mismatch at the perovskite/bulk‐heterojunction (BHJ) interface, leading to charge accumulation. In this study, it is demonstrated that introducing a uniform sub‐nanometer dipole layer formed of B3PyMPM onto the perovskite surface effectively reduces the 0.24 eV energy band offset between the perovskite and the donor of BHJ. This strategic modification suppresses the charge recombination loss, resulting in a noticeable 30 mV increase in the VOC and a balanced carrier transport, accompanied by a 5.0% increase in the fill factor. Consequently, HSCs that achieve power conversion efficiency of 24.0% is developed, a new record for Pb‐based HSCs with a remarkable increase in the short‐circuit current of 4.9 mA cm−2, attributed to enhanced near‐infrared photon harvesting.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology

Energy level alignment of dipolar interface layer in organic and hybrid perovskite solar cells

Organic Solar Cells: A New Interconnecting Layer of Metal Oxide/Dipole Layer/Metal Oxide for Efficient Tandem Organic Solar Cells (adv. Energy Mater. 17/2015)

Energy‐Level Alignment at the Organic/Electrode Interface in Organic Optoelectronic Devices

Universal Energy Level Tailoring of Self-Organized Hole Extraction Layers in Organic Solar Cells and Organic–inorganic Hybrid Perovskite Solar Cells

Tuning the Energy Level Offset between Donor and Acceptor with Ferroelectric Dipole Layers for Increased Efficiency in Bilayer Organic Photovoltaic Cells

Electronic Level Alignment in Inverted Organometal Perovskite Solar Cells

Energy Level Alignment at Interfaces in Metal Halide Perovskite Solar Cells

Interfacial Dipole in Organic and Perovskite Solar Cells

Organic Semiconductor Interfaces and Their Effects in Organic Solar Cells

Thickness‐Dependent Energy‐Level Alignment at the Organic–Organic Interface Induced by Templated Gap States

Dipolar Interlayers in Perovskite Solar Cells

Probing the Energy Level Alignment and the Correlation with Open-Circuit Voltage in Solution-Processed Polymeric Bulk Heterojunction Photovoltaic Devices

Effect of High Dipole Moment Cation on Layered 2D Organic–Inorganic Halide Perovskite Solar Cells

Mapping the energy level alignment at donor/acceptor interfaces in non-fullerene organic solar cells

Intrinsic Dipole Arrangement to Coordinate Energy Levels for Efficient and Stable Perovskite Solar Cells

Energy Band Alignment in Operando Inverted Structure P3HT:PCBM Organic Solar Cells

Photophysical pathways in efficient bilayer organic solar cells: The importance of interlayer energy transfer

Recent Advances in Interface Engineering for Planar Heterojunction Perovskite Solar Cells

Interfacial Charge Transfer Anisotropy in Polycrystalline Lead Iodide Perovskite Films

High-Mobility p-Type Organic Semiconducting Interlayer Enhancing Efficiency and Stability of Perovskite Solar Cells.

Suppressing Hole Accumulation Through Sub‐Nanometer Dipole Interfaces in Hybrid Perovskite/Organic Solar Cells for Boosting Near‐Infrared Photon Harvesting