Abstract:Aiming at the problems of increasing external dimensions and deteriorating key performance indicators in the design process of magnetorheological (MR) valve by using structural optimization method, a geometric optimization design methodology for the optimal design of a MR valve structure under specific volume constraints is proposed in this article. The optimization methodology couples the finite element model (FEM) constructed in COMSOL software with the Taguchi orthogonal experiment and response surface technology to build an approximate response surface function for the identified independent variables. Suitable optimization algorithms are then utilized to determine the optimal geometry of the MR valve, thereby maximizing the valve performance. Firstly, a radial MR valve with a single excitation coil was presented, and its structure and working principle were also elaborated. A mathematical model of the pressure drop was derived on the basis of the Bingham-Papanastasiou non-Newtonian constitutive model of MR fluid and the magnetic circuit had been analyzed with the FE analysis methodology. Then, a second-order response surface model (RSM) had been fitted for the magnetic flux density in the radial flow channel and spool region of the radial MR valve based on the Taguchi orthogonal experimental design. The fitted model was a function of the four independent variables of the radial MR valve, and the accuracy of the developed response surface function over the entire design space had also been estimated. Meanwhile, predictions made by the RSM and FE models were evaluated by analysis of variance and it was exhibited that the RSM model's results agree with FE result fairly. Subsequently, the geometric optimization problem had been formulated for the constructed RSM exploiting the genetic algorithm to find the global optimum geometrical parameters of the radial MR valve. Furthermore, the experimental test rig was setup to explore the pressure drop and the response time characteristics of the initial and optimal radial MR valve as well as the dynamic performance of the MR valve controlled cylinder system under different excitation conditions. The experimental results show that under the applied current of 2 A, the pressure drop and adjustable coefficient of the optimal radial MR valve observably increased with values of 3.15 MPa and 5.40, respectively, when compared to 2.11 MPa and 4.22 of their respective initial values. Also, at the applied current of 1.25 A, the damping force of the MR valve controlled cylinder system enlarged by 46 %, with its optimal value being 3.65 kN and initial value as 2.50 kN, which was an excellent verification of the correctness of the RSM and the effectiveness of the optimal design.

Optimization of Magnetic-Grating-Like Stroke-Sensing Cylinder Based on Response Quality Evaluation Algorithm

Precision Servo Control of GMA Based on Compounding Feedforward Compensation

Mechanical Design Optimization of A Single-Axis Moems Accelerometer Based on A Grating Interferometry Cavity for Ultrahigh Sensitivity

Optimal Design of Magnetic System for the Magnetorheological Intelligent Damper

Research on Multi-Parametric Coupling Design Method of Deformable Boring Bar in Embedded Giant Magnetostrictive Actuator

An Improved Two-Point Real-Time Measuring Method for Radial Micro-Displacement Measurement on High-Speed Smart Boring Bar

Waveforms Analysis and Optimization of New Electro-Hydraulic Excitation Technology

Modeling and optimization design of embedded time-grating sensor based on magnetic equivalent circuit

Deformation Pre-Compensated Optimization Design of Cam Ring for Low Pulsation Hydraulic Motors

Quantitative Fault Diagnostics of Hydraulic Cylinder Using Particle Filter

Study on Magnetic Resistance Displacement Sensor for Electro-hydraulic Servo Cylinder

Design and Optimization of A Novel Linear Reluctance Resolver

Research on Giant Magnetostrictive Micro-Displacement Actuator with Self-Adaptive Control Algorithm

Design of High Precision Magnetic Grid Displacement Sensor

Design, optimization, and characterization of an XY nanopositioning stage with multi-level spatial flexure hinges for high-precision large-stroke motion guidance

Geometric optimization and performance analysis of radial MR valve using Taguchi orthogonal experiment method

Design of A Long Stroke Nanopositioning Stage with Self-damping Actuator and Flexure Guide

Error Analysis and Modeling for an Absolute Capacitive Displacement Measuring System with High Accuracy and Long Range.

Optimization and Modeling of a Spatial CAM Mechanism for a Two-Dimensional Plunger Electro-Hydraulic Pump

Study on Giant Magnetostrictive Microdisplacement Actuator Having the Function of Sensing Its Displacement

Error analysis and Modeling for High Accuracy