Abstract:Electrochemical energy storage devices, like supercapacitors and batteries, are needed to meet the constantly increasing demands of portable energy devices. Many types of supercapacitor electrodes were synthesized and reported which include carbon-based materials, polymers, oxides and perovskites. In this work, we report on the fabrication of Cu doped bismuth ferrite (Cu-BiFeO 3 , Cu-BFO) nanoparticles via sol-gel procedure. In most of the doping cases the costly rare earth elements like La, Nd, Sm, Ce and Yb are used to replace Bi. Electrodes of Bi 1-x Cu x FeO 3 where x have the values 0.0, 0.025, 0.05, 0.075, 0.1 and 0.15 were deposited on graphitic sheets. Optimum Cu doping value was found to be at x = 0.05. Cu 2+ ions doping in place of Bi 3+ ions will reveal the roles of oxygen vacancies, as determined from XPS. The estimated values of specific capacitance was found to be 732 F/g at 0.5 A/g for the electrode at x = 0.05 in three electrode system. 5%Cu-BFO//Carbon black asymmetric supercapacitor (ASC) device can be charged and discharged reversibly at cell voltage of 0.0 up to 1.5 V when using a 0.5 M Na 2 SO 4 aqueous electrolyte. This configuration allows the ASC device to deliver a great energy density of 37.25 Wh/kg at a power density of 752 W/kg. The ASC device demonstrates excellent cycling stability, retaining 88.64 % of its initial specific capacitance after 5000 cycles. Increasing the Cu content up to 15 % causes instability in the crystal structure of BFO resulting on phase segregation into Bi 2 Fe 4 O 9 along with BFO and deterioration in the electrode overall performance. XPS showed that replacement of Cu 2+ in place of Bi 3+ disturbs the neutrality and the chemical environment of the compound. Hence to achieve neutrality and ionic balance, oxygen vacancies increase and the Fe 2+ /Fe 3+ ratio increases as well. Both oxygen vacancies and the change in the Fe ions ratio reduce electrochemical impedance and give rise to charge density. The homogenous distribution of the pores at x = 0.05 contributed greatly to its fast electrolyte ion diffusion that improved the observed capacitive properties. One has to mention here, that despite doping that contains ions with different ionic size and/or different oxidation state is unfavorable, to some extent, due to the changes they produce in the electronic structure and the chemical environment, nevertheless it is sometimes beneficial in creating new parameters in the structure that promote specific application like in the case of the current work, oxygen vacancies, increase in surface area and the mixed state valency.

Preparation of Nano-sized Bismuth-Doped Fe3O4 as an Excellent Magnetic Material for Supercapacitor Electrodes

Mixed-phase bismuth ferrite oxide (BiFeO3) nanocomposites by green approach as an efficient electrode material for supercapacitor application

Micro-Spatial Hydrothermal Preparation of Nitrogen-doped Carbon/NiCo2S4 Electrode Material for Supercapacitors

Magnesium Bismuth Ferrite Nitrogen-Doped Carbon Nanomagnetic Perovskite: Synthesis and Characterization as a High-Performance Electrode in a Supercapacitor for Energy Storage

Manganese Doped Co3O4 Mesoporous Nanoneedle Array for Long Cycle-Stable Supercapacitors

Fabrication of Mn doped BiFeO3 as an electrode material for supercapacitor applications

Facile fabrication of BiFeO3/g-C3N4 nanohybrid as efficient electrode materials for supercapacitor application

Formation of Nano-Ag/Bifeo3 Composite Thin Film with Extraordinary High Dielectric and Effective Ferromagnetic Properties

Bi2O3 nanosheet-coated NiCo2O4 nanoneedle arrays for high-performance supercapacitor electrodes

Enhanced Supercapacitor Performance of Bi2O3 by Mn Doping

Chemical synthesis of mesoporous CoFe2O4 nanoparticles as promising bifunctional electrode materials for supercapacitors

Facile synthesis of nanostructured bismuth oxide on nickel foam with outstanding electrochemical behavior for supercapacitor application

Superior performance of asymmetric supercapacitor based on Cu doped bismuth ferrite electrode

Engineering of Co3O4 electrode via Ni and Cu-doping for supercapacitor application

Conductive Fe@Fe<sub>2</sub>O<sub>3</sub>/FeOOH necklace-like nanowires of high electrochemical performances for a supercapacitor application

Design of iron (Fe)-doped NiCo2O4@ rGO urchin-shaped microspheres with outstanding electrochemical performances for asymmetric supercapacitor

Preparation of three-dimensional Co3O4@NiMoO4 nanorods as electrode materials for supercapacitors

Conductive Fe@Fe2O3/FeOOH necklace-like nanowires of high electrochemical performances for a supercapacitor application

High-performance strontium and bismuth bimetallic oxides electrode:combine first-principles calculations with electrochemical tests

NiO/MnO2coated on carbon felt as an electrode material for supercapacitor applications

Mixed metallic NiFe/Mn‐MOF, and derived spinel Ni0.5Fe0.5Mn2O4 as high‐performance electrochemical electrodes