Abstract:Energy storage in the form of sensible and latent heat is one of the most prominent method to enhance the performance of any solar thermal system. Solar desalination is a viable method to convert saline water into potable water, but due to its lower yield, it cannot be used as a regular source of water. The current investigation deals with the enhancement in water yield of double slope solar still by embedding eutectic phase change material (PCM) (Myristic acid + Stearic acid), nano-enhanced PCM, and wick material (steel wool fibre). Ag 2 O 3 nanoparticles at concentrations of 1.5 wt% were mixed in eutectic PCM to increase the thermal conductivity of nano-enhanced PCM. The energy, exergy, and economic analyses of four various modified cases, namely CSS (still without PCM), DSS-1 (still with eutectic PCM), DSS-2 (still with eutectic PCM and Steel wool fibre), and DSS-3 (still with nano-enhanced eutectic PCM), was carried out in central India (23.24° N and 77.41° E). The findings reveal that the cumulative yields for CSS, DSS-1, DSS-2, and DSS-3 are around 1.82, 2.44, 3.40, and 4.22 kg/m 2 . Additionally, DSS-3 cumulative freshwater production was around 132, 72.9, and 24.1% greater than that of CSS, DSS-1, and DSS-2, respectively. The maximum value of total heat transfer was achieved for DSS-3, which is higher by 45.9% than CSS, 32.8% than DSS-1, and 6.1% than DSS-2. The average energy efficiency of DSS-3 was 49%, which is greater than CSS (22.21%), DSS-1 (30.42%), and DSS-2 (41%). The findings also depict that the combined impact of PCM and nanoparticles displays an average exergy efficiency of 12.2%, which is greater than CSS, DSS-1, and DSS-2 by 3.18, 5.47, and 11%, respectively. Additionally, the economic analysis reveals that the cost per litre value of CSS, DSS-1, DSS-2, and DSS-3 was 1.06, 1.27, 1.22, and 1.07 (Rs/ l ). The integration of PCM-SWF in conventional still increases the cost of water by 13% with an increase in freshwater yield of 92%, whereas the integration of nano-enhanced PCM increases the cost of water by 1% with a tremendous increase in freshwater yield of 130%.

Thermal Performance Simulation of a Heat Pump Assisted Solar Desalination System for Kazakhstan Climatic Conditions

Simulation Analysis on Dynamic Performance of a Combined Solar/air Dual Source Heat Pump Water Heater

Simulation Study on Thermal Performance of Solar Coupled Air Source Heat Pump System with Phase Change Heat Storage in Cold Regions

Thermal Loss Analysis of a Flat Plate Solar Collector Using Numerical Simulation

Thermoenviroeconomic performance augmentation of solar desalination unit integrated with wick, nanofluid, and different nano-based energy storage materials

Performance Study of Phase Change Charging/discharging Processes of Condensing Heat Storage in Cold Regions Based on a Mathematical Model

Numerical simulation of the performance of passive and active solar still with corrugated absorber surface as heat storage medium for sustainable solar desalination technology

Experimental and Theoretical Investigations of a Ground Source Heat Pump System for Water and Space Heating Applications in Kazakhstan

Parametric study and thermal performance assessment of a new solar desalination unit coupled with heat pump

Comparative thermal model analysis and experimental validation for predicting performance of a pyramidal solar still with integrated pulsating heat pipe

Experimental and Mechanism Analysis of a Tandem Solar Thermal System with Staged Water Level Reduction

A novel energy storage system for latent heat recovery in solar still using phase change material and pulsating heat pipe

Thermodynamic and economic analysis of heat pump-assisted solar still using paraffin wax as phase change material

Performance Assessment of Three Latent Heat Storage Designs for a Solar Hot Water Tank

Design Analysis of a Solar-Powered Water Desalination System Using Humidification Dehumidification for Continuous Water Production

Barriers to implementation of phase change materials within solar desalination units: Exergy, thermal conductivity, economic, and environmental aspects review

Thermal Enhancement of Solar Energy Storage Using Phase Change Materials

Hybrid air conditioning and seawater desalination system assisted by solar energy: thermoeconomic investigation and optimization

Performance of a direct-expansion solar-assisted heat pump for domestic hot water production in Algeria

Modeling and performance analysis of a hybrid conventional solar still–adsorption desalination system

Enhancing the performance of double-slope solar still using nano-enhanced eutectic phase change materials and steel wool fibre as wick material