Abstract:An orthotropic steel deck (OSD) has a complicated structure, and its fatigue life is mainly determined by various welding details. Fatigue assessment of deck-to-rib welded joints under long-term train loads is an important concern for engineers. Using the stress range–number of cycles (S-N) curves that are recommended by existing specifications, it is difficult to consider welding residual stress. As a type of initial stress, welding residual stress reduces structural fatigue life by influencing the mean stress of the external cyclic load. However, the effect of mean stress is often overlooked by traditional welding fatigue theory. In this paper, a full-range S-N curve model of steel fatigue resistance integrating welding residual stress is proposed by adopting the Soderberg formula to equivalently transform the stress amplitude and mean stress. The Nanjing Dashengguan Bridge, a six-line railway steel arch bridge and the longest steel arch bridge in the world, is used as an example to demonstrate the fatigue life evaluation procedure of the proposed model in detail. First, the distribution of the welding residual stress of deck-to-rib welded details is obtained based on a refined finite-element model (FEM), and its accuracy is verified experimentally. Second, the partial welded joint model is embedded into the whole multiscale FEM of the steel deck. The structural/real stress spectrum of the welded details under a passenger/freight train is obtained by integrating the coupling effect of the train load stress and residual stress. Finally, fatigue life evaluation of the deck-to-rib welded details of the Dashengguan Bridge is carried out based on the proposed S-N curve model, integrating the residual stress and annual train volume. The results show that (1) the longitudinal residual stress (σZ) on the top and bottom surfaces of the deck vary with its welding direction respectively (perpendicular or parallel); (2) the maximum value of the real stress under the coupling effect of train load stress and residual stress is less than the yield strength (fy), so the influence of mean stress on the fatigue life of welded joints should still be considered; and (3) the fatigue life calculated by the proposed model is more accurate and conservative than a common standard. In summary, the proposed model provides a basis for determining whether the Dashengguan Bridge can allow freight trains to pass.

Fatigue life evaluation of continuous welded rails on concrete slab track in Korea high-speed railway

The Fatigue Life Evaluation of Rail on the Concrete Track of High Speed Railway by Analysis of the Vehicle/Track Interaction

On stress and deformation accumulation of continuously welded rails under cyclic thermal loading in high-speed railways

A numerical study on the fatigue life design of concrete slabs for railway tracks

Investigating the fatigue performance of conventional reinforced concrete CRTS III ballastless track structures using a fatigue damage constitutive model

Displacement Range Based Fatigue Strength Verification of KR-Type Rail Clip

Fatigue Characteristics of Long-Span Bridge-Double Block Ballastless Track System

Fatigue life assessment of high-speed train’s bogie frame due to dynamic loads under the influence of wheel flat

Fatigue damage and reliability assessment of subway train bogie frames under operating conditions

Investigation of the Fatigue Behaviour of a Ballastless Slab Track–Bridge Structural System under Train Load

A dynamic analysis of a continuous welded rail track under a longitudinal stress caused by temperature changes

Combining welding-induced residual stress with thermal and mechanical stress in continuous welded rail

Force Analysis of CRTS II Slab Track on Long Span Bridge under Damage Conditions

Comparative Study of Wheel–Rail Contact Impact Force for Jointed Rail and Continuous Welded Rail on Light-Rail Transit

Fatigue Life Evaluation of Welded Joints in OSD for Railway Bridges Considering Welding Residual Stress

Fatigue life analysis of subway e‐clips under multiwavelength rail corrugation excitation

Longitudinal resistance characteristic of rail fastener considering the vertical load 박상준

A Novel Fatigue Cohesive Model for Interface Between Ballastless Track Slab and Self-Compacting Concrete

Experimental study on CRTS II ballastless track-bridge structural system mechanical fatigue performance

Analysis of fatigue crack propagation in rails under combined action of wheel load and residual stress

Fatigue life prediction of a railway hollow axle with a tapered bore surface