Abstract:Conventional grating-inscription technology usually inscribes only one fiber Bragg grating (FBG) in the core of an optical fiber. A novel femtosecond laser point-by-point technology was demonstrated to parallel-inscribe multiple FBGs, i.e., so-called parallel-integrated FBGs (PI-FBGs), with either different or the same reflection wavelengths in the core of a standard single-mode fiber. Single- or multiwavelength PI-FBGs exhibited one or multiple peaks in the reflection spectrum, respectively. The length of PI-FBGs can be shortened to hundreds of micrometers to increase the spatial resolution of the FBG-based sensors. Our ultrashort PI-FBGs with a length of 500 m could be used to realize ultrahigh temperature sensing with a high spatial resolution of less than 1mm, a linear sensitivity of 15.0pmC, and a large measurement range of up to 1100C, which overcomes the shortcomings of conventional FBG-based sensors with a low spatial resolution of more than 1 cm and a small measurement range of up to 300C. Moreover, the grating parameters, such as reflectivity, reflection wavelength, polarization-dependent loss, and full width at half maximum, can be improved to achieve desired PI-FBGs by changing the spatial distribution and grating number of the PI-FBGs. The PI-FBGs are insensitive to bending, which reduces bend-induced measurement errors. Therefore, our PI-FBGs will find potential applications in the fields of optical fiber sensors, communications, and lasers.

Ultra-fast polymer optical fibre Bragg grating inscription for medical devices

Nanoimprinted Polymer Micro/Nanofiber Bragg Gratings for High-Sensitivity Strain Sensing

Single nanosecond-pulse production of polymeric fiber Bragg gratings for biomedical applications

Modulation of the Dual Resonant Peaks of a Long-Period Fiber Grating Towards Highly Sensitive Sensing by Means of Polymeric Nanocoatings for Biosensing Applications

Fast Inscription of Long Period Gratings in Microstructured Polymer Optical Fibers

Fast and stable gratings inscription in POFs made of different materials with pulsed 248 nm KrF laser

Ultra-fast fiber Bragg grating inscription in CYTOP polymer optical fibers using phase mask and 400 nm femtosecond laser

Polymer Optical Fiber Bragg Grating Inscription with a Single Nd:YAG Laser Pulse.

Plane-by-Plane Femtosecond Laser Inscription Method for Single-Peak Bragg Gratings in Multimode CYTOP Polymer Optical Fiber

A Fully-Encircled Polymerized Microfiber Bragg Grating by 3D Femtosecond Laser Nanofabrication

LPG inscription in mPOF for optical sensing

Femtosecond Laser Inscribed POF Bragg Grating for Flexible and Wearable Sensing Applications

Advances on Polymer Optical Fiber Gratings Using a KrF Pulsed Laser System Operating at 248 Nm

Point-by-point fiber Bragg grating inscription in free-standing step-index and photonic crystal fibers using near-IR femtosecond laser

Bragg Grating Inscription with Low Pulse Energy in Doped Microstructured Polymer Optical Fibers

Femtosecond-Pulsed Laser Written and Etched Fiber Bragg Gratings for Fiber-Optical Biosensing

Long-period Grating Inscription on Polymer Functionalized Optical Microfibers and Its Applications in Optical Sensing

Direct infrared femtosecond laser inscription of chirped fiber Bragg gratings

Direct Bragg Grating Inscription in Single Mode Step-Index TOPAS/ZEONEX Polymer Optical Fiber Using 520 nm Femtosecond Pulses

High-sensitivity stress sensor based on Bragg grating in BDK-doped photosensitive polymer optical fiber

Parallel-Integrated Fiber Bragg Gratings Inscribed by Femtosecond Laser Point-by-Point Technology