Abstract:This article proposes a novel highly sensitive humidity sensor with temperature compensation, mainly consisting of a special modal interferometer bonded with thick polyimide (PI) solid films. The modal interferometer is constructed by splicing a special dual-mode fiber (DMF) with two sections of regular single mode fiber (SMF), forming an SDS (SMF-DMF-SMF) structure. Due to the particular design of the refractive index of the DMF, only ${\text {LP}}_{{01}}$ and ${\text {LP}}_{{02}}$ modes are transmitted, which causes a unique wavelength (UWL) to appear in the spectrum. The UWL breaks the periodicity of the conventional interferometric spectrum. More importantly, both sides of UWL respond differently to various measurands, which enables the interferometer to measure dual parameters simultaneously. To achieve a higher humidity sensitivity, the thick PI solid films are used for the first time to manufacture the interferometric humidity sensors. Their thickness is at least one order of magnitude greater than that of the PI coating used in the traditional humidity sensors, which enhances the sensor’s response to humidity variation significantly. The performance of the proposed sensor is further improved with the aid of the varied period Vernier effect by paralleling a bare dual modal interferometer based on the SDS structure as a reference. Similar to the sensing modal interferometric spectrum, the output spectrum of the varied period Vernier effect scheme owns the UWL as well, which makes it easy to distinguish the wavelength shifts of the specific peaks to the measurands. The validity of the proposed scheme is verified by an experimental case, where the humidity sensitivity and the temperature sensitivity are achieved as 1044.26 pm/%RH and 1467.99 pm/°C, respectively.

Simultaneous Measurement of Temperature and Relative Humidity Based on FBG and FP Interferometer

Simultaneous Measurement of Temperature and Relative Humidity Using Cascaded C-shaped Fabry-Perot interferometers

Simultaneous Measurement of Displacement and Temperature Based on Two Cascaded Balloon-Like Bent Fibre Structures

Optical Fiber Relative Humidity Sensor Based on FBG Incorporated Thin-Core Fiber Modal Interferometer

Hybrid-cavity Fabry-Perot Interferometer for Multi-Point Relative Humidity and Temperature Sensing

Hybrid-Cavity Fabry-Perot Interferometer for Simultaneous Relative Humidity and Temperature Measurement

Novel Knob-integrated fiber Bragg grating sensor with polyvinyl alcohol coating for simultaneous relative humidity and temperature measurement

An Open-Cavity Fabry-Perot Interferometer with PVA Coating for Simultaneous Measurement of Relative Humidity and Temperature

A Fabry–Perot Sensor with Cascaded Polymer Films Based on Vernier Effect for Simultaneous Measurement of Relative Humidity and Temperature

Air Gap Fiber Bragg Grating for Simultaneous Strain and Temperature Measurement

A fully distributed fiber optic sensor for simultaneous relative humidity and temperature measurement with polyimide-coated polarization maintaining fiber

Optical Fiber Interferometric Humidity Sensor by Using Hollow Core Fiber Interacting with Gelatin Film

Simultaneous Measurement of Seawater Temperature and Depth Using Polarization-Maintaining Fiber Bragg Grating and Extrinsic Fabry-Perot Interferometer

Strain and Temperature Discrimination by Using Temperature-Independent FPI and FBG

Highly sensitive humidity measurement with temperature compensation based on a special dual-modal interferometric sensor and varied period Vernier effect

Simultaneous Measurement of Liquid Level and Temperature Using In-Fiber Grating-Based Mach-Zehnder Interferometer and Faraday Rotator Mirror

High sensitivity relative humidity sensor based on two parallel-connected Fabry–Perot interferometers and Vernier effect

Femtosecond laser-inscribed fiber-optic sensor for simultaneous temperature and relative humidity measurements

A Cheap and Practical FBG Temperature Sensor Utilizing a Long-Period Grating in a Photonic Crystal Fiber

A Polyimide-Coated Fiber Bragg Grating Sensor for Multidepth Soil Humidity Measurement

Simultaneous Strain and Temperature Measurement Using Compact Core-Offset Inter-Modal Interferometer with Embedded Fiber Bragg Grating