Abstract:Titanium alloys are notoriously difficult to machine. They are used in the manufacture of various types of lightweight components. It is therefore important to improve their machinability and thus achieve sustainability in machining such alloys, by selecting appropriate influential factors: cutting parameters, tool material, geometric form, coolant types, and hybrid machining methods, to deliver efficient output. Nowadays, meta-heuristic algorithms effectively solve multi-objective optimization in machining problems instead of single-objective one. Along with that, the mathematical predictive models used for single-objective optimization are gradually being replaced by machine learning algorithms, which are highly robust and efficient in terms of prediction performance. Therefore, this work addresses the prediction and optimization of average surface roughness (Ra) and tool wear (VB) in Ti 6 Al 4 V alloy turning, using a WC tool coated by chemical vapor deposition (CVD) and physical vapor deposition (PVD), with dry machining. We apply a two-pronged approach combining machine learning (ML) and Non-Dominated Sorting Genetic Algorithm (NSGA-II), to model and optimize Ra and VB. The four ML models – Linear Regression (LIN), Support Vector Machine Regression (SVR), Extreme Gradient Boosting (XGB), and Artificial Neural Network (ANN) – are used to predict Ra and VB. The input variables of the turning process – feed rate, depth of cut, cutting speed, cutting time, and tool materials – are the major factors affecting surface quality and tool wear. By the error metrics such as root mean squared error (RMSE), mean absolute error (MAE), and coefficient of determination (R 2 ), ANN is found to offer the best predictive performance. An ML and NSGA-II-based approach is then employed for multi-objective optimization of cutting parameters in Ti 6 Al 4 V turning. Fifty Pareto solutions are identified in the range of Ra and VB between (1.332 and 1.441 μm) and (0.100 and 0.125 mm), respectively. In this work, the Pareto solutions are selected based on their ranked performances. This aligns with the decision criterion employed to select the most robust cutting parameters. The definitive optimal Ra and VB are obtained by formulating a robust decisive multi-criterion function which integrates performance, preferred decision criterion, and trustworthiness. Finally, this produces the optimal solution for Ra and VB − 1.439 μm and 0.100 mm, respectively. Experimental validation confirms that the final optimum solution is within the acceptable range.

Optimization of interior roller burnishing process for improving surface quality

Optimisation of internal roller burnishing process in CNC machining center using response surface methodology

Multi-objective optimization of the flat burnishing process for energy efficiency and surface characteristics

Application of GRA method for multi-objective optimization of roller burnishing process parameters using a carbide tool on high carbon steel (AISI-1040)

Optimization of CNC turning parameters with different turning tool radii for sphere surface profiles of SUS 304 material based on PVD coating technology applied for industrial arts

Development of a hybrid particle swarm optimization algorithm for multi-pass roller grinding process optimization

Multi-objective optimization based on machine learning and non-dominated sorting genetic algorithm for surface roughness and tool wear in Ti6Al4V turning

Optimization of Machining Parameters in Mild Steel Turning Operation by Response Surface Methodology

Improving surface integrity by optimizing slide diamond burnishing parameters after hard turning of 42CrMo4 steel

Optimization of Surface Quality and Power Consumption in Machining Hardened AISI 4340 Steel

Evaluation of optimized surface characteristics in non-rotational sliding ball burnishing

Multiobjective Optimization of Surface Roughness and Tool Wear in High-Speed Milling of AA6061 by Machine Learning and NSGA-II

The Modelling of Surface Roughness after the Ball Burnishing Process with a High-Stiffness Tool by Using Regression Analysis, Artificial Neural Networks, and Support Vector Regression

Multi-objective optimization of hard milling process of AISI H13 in terms of productivity, quality, and cutting energy under nanofluid minimum quantity lubrication condition

Multi-objective optimization of slide diamond burnishing parameters for enhanced fatigue resistance of AISI 52100 steel

Surface integrity optimization for ball-end hard milling of AISI D2 steel based on response surface methodology

Analysis and Multi-Objective Optimization for Reducing Energy Consumption and Improving Surface Quality during Dry Machining of 304 Stainless Steel

Investigation of influence of grinding wheel and cutting parameters on surface roughness and surface hardening when relieving grinding the gear milling teeth surface based on the Archimedes' spiral

Multi-Objective Process Parameter Optimization of Ultrasonic Rolling Combining Machine Learning and Non-Dominated Sorting Genetic Algorithm-II

Surface work-hardening optimization of cold roll-beating splines based on an improved double-response surface-satisfaction function method

Understanding Machining Process Parameters and Optimization of High-Speed Turning of NiTi SMA Using Response Surface Method (RSM) and Genetic Algorithm (GA)