Abstract:The lamellae deformation and cavitation behavior of annealed isotactic polypropylene during uniaxial stretching are comprehensively investigated by in situ synchrotron small-angle X-ray scattering and wide-angle X-ray scattering. We reveal how lamellae deformation occurs in the time scales of elastic deformation, intralamellar slip, and melting-recrystallization, separated by three critical strains which are only rarely influenced by annealing. Strain I (0.1) marks the end of elastic deformation and the onset of intralamellar slip, beyond which the crystallinity decreases gradually. Strain II (0.45) signifies the start of the recrystallization process, from where the long period in the stretching direction begins to decrease from its maximum and the polymer chains in the crystal start to orient along the stretching direction. The energy required for melting arises from the friction between the fragmented lamellae produced by intralamellar slip. Strain III (0.95) denotes the end of the recrystallization process. Beyond the strain of 0.95, the long period and the crystal size remain nearly unchanged. During further stretching, the newly formed lamellae serve as the anchoring points for polymer chains in the amorphous phase. The extension of the polymer chains in between lamellae triggers the strain hardening behavior. On the other hand, annealing significantly decreases the critical strain for voids formation and increases the voids number but restricts the void size. For those samples annealed at a temperature lower than 90 degrees C, voids are formed between strain II and strain III, and voids are oriented in the stretching direction once they are formed. However, for those samples annealed at a temperature higher than 105 degrees C, voids are formed between strain I and strain II. In this case, voids are initially oriented with their longitudinal axis perpendicular to the stretching direction and then transferred along stretching direction via void coalescence. Additionally, the formation of voids influences neither the critical strains for lamellae deformation nor the final long period, the orientation of polymer chains, or the crystal size. The final long period, the orientation of polymer chains in the crystal, and the crystal size are determined only by the stretching temperature through melting-recrystallization.

Initiation, Development and Stabilization of Cavities during Tensile Deformation of Semicrystalline Polymers

Lamellar thickness and stretching temperature dependency of cavitation in semicrystalline polymers

The breakage of original crystallites determined small strain cavitation in syndiotactic polypropylene during step-cycle tensile deformation

Deformation Mechanisms of Polymer Thin Films by Simultaneous Kinetic Measurement of Microscopic Infrared Dichroism and Macroscopic Stress. Part Iii: Influence of Morphology on Molecular Orientation of Isotactic Polypropylene Films Subjected to Uniaxial Stretching

Stretch-Induced Intermediate Structures and Crystallization of Poly(dimethylsiloxane): the Effect of Filler Content

Tensile deformation mechanism of propylene-1-butene random copolymer: The role of initial crystalline morphology

Studying deformation behavior of a single spherulite with in-situ infrared microspectroscopic imaging

Transcrystalline Mechanism of Banded Spherulites Development in Melt-Crystallized Semicrystalline Polymers

Deformation mechanism of polyethylene spherulites estimated by crystal orientation distribution function and small angle light scattering under Hv polarization condition

Critical Strains for Lamellae Deformation and Cavitation During Uniaxial Stretching of Annealed Isotactic Polypropylene

Deformation-induced crystal–crystal transition of polybutene-1: an in situ FTIR imaging study

Structure Development During Stretching and Heating of Isotactic Propylene-1-Butylene Random Copolymer: from Unit Cells to Lamellae

Stretch-Induced Crystallization and Phase Transitions of Poly(dimethylsiloxane) at Low Temperatures: an in Situ Synchrotron Radiation Wide-Angle X-ray Scattering Study

Relationship Between Molecular Configuration and Stress-Induced Phase Transitions

Stretch-Induced Crystal-Crystal Transition Of Polybutene-1: An In Situ Synchrotron Radiation Wide-Angle X-Ray Scattering Study

Real‐time AFM Study of Lamellar Growth of Semi‐crystalline Polymers

Initiation of Cavitation Upon Drawing of Pre-Oriented Polypropylene Film: in Situ Saxs and Waxd Studies

Control of nano-cavitation in semi-crystalline polymer nanocomposites during uniaxial tension: In situ synchrotron X-ray study

Structural Characteristics of Fibrillar Crystals in Uniaxially Stretched Isotactic Polypropylene Dominated by Temperature and Strain

Stretch-induced crystalline structural evolution and cavitation of poly(butylene adipate-ran-butylene terephthalate)/poly(lactic acid) immiscible blends

Reversible–Irreversible Transition of Strain-Induced Crystallization in Segmented Copolymers: the Critical Strain and Chain Conformation