Abstract:In the absence of flux measurements, techniques of field orientations depend on motor parameters, particularly on rotor resistances. During operation in flux-oriented mode, online continuous estimation of harmonic and fundamental rotor resistances is important for multiphase IM. To limit the core saturation and to achieve the synchronous and aligned air-gap flux density distribution, the harmonic plane is based on magnetizing flux-oriented control (MFOC) whereas the fundamental plane is taken as rotor flux-oriented control (RFOC). Mismatch harmonic and fundamental resistances trigger deviations in the rotor and magnetizing flux and also cause misalignment in the resultant induced electromotive force (EMF) waveform which could, in turn, be the reason for over-excitation and under-excitation. This article formulates the simultaneous online identification of rotor resistances for particularly MFOC harmonic plane while the fundamental plane is RFOC based on the dot product of rotor flux and stator current for making a model reference adaptive system (MRAS). Mismatched stator resistance and dead time of inverter have a negligible effect on the reference model during steady state. Convergence and steady-state performance can be acquired for a variation of load conditions particularly at heavy loading. The validation of the proposed approach is verified through simulation and experiment results by incorporating a multiphase platform consisting of a seven-phase induction machine.

Comparative study of field-oriented control model in application for induction and synchronous reluctance motors for life-cycle analysis

Comparative Study of Field-Oriented Control in Different Coordinate Systems for DTP-PMSM

Quantitative Characteristic Comparison Between Sensorless Six Step and Field Oriented Control Methods for Permanent Magnet Brushless DC Motors

Comparative Study of PI, Sliding Mode and Fuzzy Logic Controller for Rotor Field Oriented Controlled Induction Motor Drives

Harmonic and Fundamental Rotor Resistance Estimation Scheme for Multiphase Induction Motor Based on Nonsinusoidal Supply Control

A comparative study of luenberger observer, sliding mode observer and extended Kalman filter for sensorless vector control of induction motor drives

Design and analysis on switched reluctance motor system using field-circuit coupled method

A Control Strategy for the Optimal Efficiency of Induction Motor Based on Loss Model and Fuzzy Search

Control Of Induction Motor Drive Based On Adrc And Inertia Estimation

Open-Loop Validation of a decoupled model of an Induction Motor Supplied by a PWM Inverter

Modelling, simulation & analysis of induction motor using artificial intelligent controller

PMSM Field-Oriented Control with Independent Speed and Flux Controllers for Continuous Operation under Open-Circuit Fault at Light Load Conditions

Model-free control-based vector control of synchronous reluctance motor

A field-oriented control (FOC) method using the virtual currents for the induction motor drive

Field oriented control dataset of a 3-phase permanent magnet synchronous motor

A survey on sliding mode control strategies for induction motors

Performance comparison of Rotor Flux based and Back EMF Based Model Reference Adaptive System Speed Estimator for 3 Phase Induction Motor

Energy Efficient Control of Electric Motors

EMF Feedback Control Strategy of Induction Motor for Wide Speed Range

Sliding Mode Solution for Rotor Flux Control and Estimation of Induction Motors Using Energetic Macroscopic Representation

Comparing of switching frequency on vector controlled asynchronous motor