Abstract:Precast Segment Bridge Columns (PSBCs), which attract more attention owing to the merits of faster construction rate and higher construction quality compared with monolithic columns, are prone to serious damage under a severe earthquake. Seismic performance improvement and rehabilitation of earthquake-damaged PSBCs are significant to promote applications in seismic-prone areas. Ultra-high performance concrete (UHPC) jackets, which are promising in the field of rapid retrofit of civil structures, were used to retrofit damaged PSBCs in this study. To investigate the seismic design method and performance of repaired PSBCs using UHPC jackets, a 1/10-scale earthquake-induced damaged PSBC was retrofitted based on a proposed reinforcement design method, and tested under vertical loading and incremental lateral cyclic loading. The failure mode, hysteresis curve, residual displacement, and energy dissipation capacity of the repaired column were compared with those of the original column. In addition, based on a verified 3D finite element model by the test, a parameter analysis was conducted to explore the effect of the height and wall thickness of the UHPC jacket on the seismic behavior of the repaired PSBCs. The results indicated that the earthquake-damaged PSBC repaired with the UHPC jacket had an equivalent initial stiffness, 18.9% higher energy dissipating ability at 4.0% drift ratio and 16.2% larger strength compared with the undamaged column. The numerical simulation showed that the height and thickness of the UHPC jacket had an influence on the failure location and strength of the repaired PSBCs. Besides, the design method for the damaged precast column reinforced with the UHPC was confirmed by the test and finite element model, and it could be applied to the retrofit design of the damaged precast segment column.

Contribution of C-PC to Resilience of Concrete Structures in Seismic Country Japan

Improved Seismic Design Using Bolted End Plate Connections For Steel Reinforced Concrete Composite Structures

Resilience-incorporated seismic risk assessment of precast concrete frames with "dry" connections

STATE OF THE ART IN REPAIR AND STRENGTHENING METHODS OF DETERIORATED CONCRETE BRIDGE STRUCTURES

Fatigue Degradation Properties of Pcm-Concrete Interface

Effect of ICCP on Bond Performance and Piezoresistive Effect of Carbon Fiber Bundles in Cementitious Matrix

Field and Laboratory Investigation of a 60-Year-Old Precast Prestressed Concrete Building in Japan

Rapid rehabilitation of damaged UHPC-NSC composite pier after earthquake

Effect of ICCP on Tensile Performance and Piezoresistive Effect of CFRCM Plates

Underwater fatigue behavior of cementitious mortar and a countermeasure using a water-dispersible polyurethane ether–Portland cement composite

Seismic Risk Assessment and Rehabilitation Method of Existing RCC Structures Using Micro Concrete

Experimental Study of a Novel Multi-Hazard Resistant Prefabricated Concrete Frame Structure

Hybrid Reinforced Concrete Frames with Engineering Cementitious Composites: Experimental and Numerical Investigations

Experimental Study on Cyclic Response of Concrete Frames Reinforced by Steel-CFRP Hybrid Reinforcement

Passive Control Reinforced Concrete Frame Mechanism with High Strength Reinforcements and Its Potential Benefits Against Earthquakes

Development and application of a highly durable precast prestressed concrete slab deck using fly ash concrete

Seismic vulnerability assessment of a RC structure before and after FRP retrofitting

Seismic Resilience of Concrete Moment Frames with Fibrous Rubberized Beam-Column Joints

Preparation of polyurethane concrete and its novel application in bridge expansion joint anchorage zone

Experimental and theoretical study of seismic and progressive collapse resilient composite frames

Design and seismic performance of precast segmental bridge columns repaired with UHPC jacket after earthquake-induced damage