Abstract:Experiments have shown that the ballistic performance of the steel plate improves significantly after coating polyurea at the impact face. However, the strengthening mechanism of the elastomer coating on the ballistic-resistance is not understood well until now. In this paper, the strengthening mechanism and thickness effect of the coating under fragment simulating projectiles (FSP) impact are studied through numerical and experimental analysis. Firstly, a viscoplastic constitutive model of polyurea is developed based on experimental characterization and thermodynamic equation of state. It can capture strongly nonlinear volumetric behavior and impact-induced shearing stiffening and strengthening considering the coupling of high pressure, high temperature, and high strain rate under ballistic impact. Then, by applying this newly developed viscoplastic model of polyurea, the underlying ballistic-resistant mechanism of the polyurea-coated steel plate is numerically studied. The analysis shows that the dynamic behavior of polyurea under ballistic impact and propagating regulation of impact wave jointly play the key role. One side, the impact-induced stiffening and strengthening of the polyurea change the failure modes of the steel plate and considerably improve the ballistic-resistance of the structure. The other side, increasing coating thickness can only provide the limited benefit for improving the ballistic-resistance of the structure, as obtained in experiments. For the impact-face-coated steel plate, the low-thickness polyurea coating suffering from FSP impact can increase the frequency of the compressive wave reflection-superposition on the high-impedance polyurea/steel interface before the energy transfer from the impacted location. This helps to improve the pressure level and enhance the instantaneous energy storage and dissipation of the polyurea per volume significantly. However, increasing coating thickness can make the pressure level and the specific energy density of polyurea decrease gradually during penetration. It is also found that the energy dissipation of FSP during penetration is reduced after increasing the coating thickness because of the erosion mitigation from the structure. The new insight on the strengthening mechanism of elastomer coating will be helpful for the light armor design.

EFFECTS OF ADDITIVES, PIGMENT AND FILLER ON PHYSICO- MECHANICAL PROPERTIES AND WEATHER RESISTANCE OF POLYUREA COATINGS

The Coating Properties of Waterborne UV-Curable Polyurethane Acrylate and Influencing Factors

Applying a polyurea coating to high-performance organic cementitious materials

Preparation and Properties of Phase‐change Heat‐storage UV Curable Polyurethane Acrylate Coating

EFFECT OF FILLER ON THE ANTISKID PROPERTY AND WEAR RESISTANCE OF POLYUREA ELASTOMER

High Performances Polyurethane-Urea Polyacrylate Hybrid Emulsion Coatings with Multiple Crosslinking Structures

Durability of polyurethane - cement floors

Preparation and Performance of UV Curable Epoxy Acrylate/Polyimide Resin Powder Composite Coating

Wear, Corrosion and Tribocorrosion Behavior of Polyurethane and Polyvinylpyrrolidone Blends as Coating for Corrosion Protection of AISI 316L Stainless Steel

Study on the Synthesis and Properties of Waterborne Polyurea Modified by Epoxy Resin

Preparation and Properties of UV-curable Diamine-Based Polyurethane Acrylate Hard Coatings

Study on UV Curable Aqueous Polyurethane Coatings

Enhancing the adhesion strength of polyurethane coatings by dispersing layered silicates via sonication and high-shear mixing method

Hybrid aliphatic and aromatic diisocyanates forming mixed urea segments for high-performance polyurea

Structural engineering of polyurethane coatings for high performance applications

Effect of Urea-Formaldehyde-Coated Epoxy Microcapsule Modification on Gloss, Toughness and Chromatic Distortion of Acrylic Copolymers Waterborne Coating

Self-Healing Epoxy Coating Modified by Double-Walled Microcapsules Based Polyurea for Metallic Protection

Studying the strengthening mechanism and thickness effect of elastomer coating on the ballistic-resistance of the polyurea-coated steel plate

Influence of Dilution on the Mechanical Properties and Microstructure of Polyurethane-Cement Based Composite Surface Coating

Preparation and Characterization of Ethylenediamine-Polyurea Microcapsule Epoxy Self-Healing Coating

A Novel Route to Emulsifier-free, Waterborne Hydroxyl Functional Polyacrylate with Low VOC Level and its Application in 2K-WPU Coatings