Abstract:This paper reports a grain regrowth and bifacial passivation strategy to reduce recombination losses for wide‐bandgap perovskite solar cells. As a result, PCEs of 21.9% and 19.9% are achieved for the opaque and semitransparent perovskite solar cells, respectively. Furthermore, a perovskite/silicon 4‐terminal (4‐T) tandem cell with an attractive PCE of 29.8% is realized. The wide‐bandgap perovskite solar cell is a crucial part of perovskite/silicon tandem solar cells, which offer an avenue for surpassing the power conversion efficiency (PCE) limit of single‐junction silicon solar cells. However, the actual efficiency of such tandem solar cells today is diminished by the nonradiative recombination losses in the wide‐bandgap perovskite subcells. Here, this work reports a grain regrowth and bifacial passivation (GRBP) strategy to reduce recombination losses at the grain boundaries and perovskite/charge transport layer interfaces simultaneously. This is achieved by a posttreatment of perovskite films with a mixture of methylammonium thiocyanate (MASCN) and phenethylammonium iodide (PEAI). The MASCN induces the regrowth of perovskite grains and simultaneously facilitates the penetration of PEAI into the hole‐transport‐layer (HTL)/perovskite bottom interface. Thereby, the bulk and interface nonradiative recombination losses are reduced and the open‐circuit voltage in solar cells is considerably increased. PCEs of 21.9% and 19.9% for the 1.65‐eV bandgap opaque and semitransparent perovskite solar cells, respectively, are obtained. The encapsulated semitransparent perovskite solar cells retain their initial efficiency following 500 h of operation under one‐sun illumination in ambient conditions. The perovskite/silicon 4‐terminal (4‐T) tandem cells are fabricated with impressive PCEs 29.8% and 28.5% for 0.049 cm2 and 1 cm2 devices, respectively.

Hybrid perovskite films approaching the radiative limit with over 90% photoluminescence quantum efficiency

High Quality Hybrid Perovskite Semiconductor Thin Films with Remarkably Enhanced Luminescence and Defect Suppression via Quaternary Alkyl Ammonium Salt Based Treatment

Efficient Light-Emitting Diodes Based on Nanocrystalline Perovskite in A Dielectric Polymer Matrix

Pseudohalide-Induced Recrystallization Engineering for CH3NH3PbI3 Film and Its Application in Highly Efficient Inverted Planar Heterojunction Perovskite Solar Cells

The Efficiency Limit of CH3NH3PbI3 Perovskite Solar Cells

Reduced recombination via tunable surface fields in perovskite thin films

Perovskite light-emitting diodes with external quantum efficiency exceeding 20 per cent

Tailoring the Energy Landscape in Quasi-2D Halide Perovskites Enables Efficient Green-Light Emission.

Hybrid PbS Quantum-Dot-in-Perovskite for High-Efficiency Perovskite Solar Cell.

Revealing the internal luminescence quantum efficiency of perovskite films via accurate quantification of photon recycling

Flexible and efficient perovskite quantum dot solar cells via hybrid interfacial architecture

High-efficiency perovskite–polymer bulk heterostructure light-emitting diodes

Hybrid Perovskite Quantum Dot/Non‐Fullerene Molecule Solar Cells with Efficiency Over 15%

Surface Analytical Investigation on Organometal Triiodide Perovskite

Grain Regrowth and Bifacial Passivation for High‐Efficiency Wide‐Bandgap Perovskite Solar Cells

Controllable Self-Induced Passivation of Hybrid Lead Iodide Perovskites Toward High Performance Solar Cells.

Efficient Perovskite Solar Modules with Minimized Nonradiative Recombination and Local Carrier Transport Losses

Constructing an Interfacial Gradient Heterostructure Enables Efficient CsPbI3 Perovskite Solar Cells and Printed Minimodules

Photon Management for Efficient Hybrid Perovskite Solar Cells Via Synergetic Localized Grating and Enhanced Fluorescence Effect

Pathways towards 30% efficient single-junction perovskite solar cells and the role of mobile ions

Heterojunction Modification for Highly Efficient Organic - Inorganic Perovskite Solar Cells