Abstract:In this paper, a novel nonlinear control design method for the wind turbine (WT) with doubly fed induction generator (DFIG) using differential geometry theory is proposed. The WT with DFIG is represented by a third-order model where electromagnetic transients of the stator are neglected. Then the model is exactly linearized using the coordinate transformation in differential geometry theory. Since the relative degree of the model of the WT with DFIG is equal to the order of the original system model, the linearized model can be transformed into the Bronovsky norm form. The linear quadratic regulator (LQR) design method is introduced to design the optimal control for the linearized system, and the nonlinear control for the WT with DFIG obtained by the inverse coordinate transformation only depends on the parameters of the WT with DFIG. Hence, the nonlinear control can be considered as a decentralized control, which is a desirable feature for a WT with DFIG. To illustrate the effectiveness of the nonlinear controller proposed, simulations on a single machine infinite bus (SMIB) system and a four-machine system are performed. Compared to the conventional PI control, the proposed nonlinear control can improve the transient stability of the power systems and enhance the system damping.

Maximum Power Extraction Method for a Doubly-fed Induction Generator Wind Turbine

Modeling and Control of Wind Turbine with Doubly Fed Induction Generator

Phase–amplitude Model for Doubly Fed Induction Generators

Decentralized Nonlinear Control of Wind Turbine with Doubly Fed Induction Generator

Limit Cycle Based Simple Mppt Control Scheme for A Small Sized Wind Turbine Generator System - Principle and Experimental Verification

Simulation of a Site-Specific Doubly-Fed Induction Generator (DFIG) for Wind Turbine Applications

The wind turbine's direct power control of the doubly-fed induction generator

Novel DC Grid Connection Topology and Control Strategy for DFIG-based Wind Power Generation System

Optimization of doubly-fed induction generator (DFIG)based wind turbine to achieve maximum power generation with imperialist competitive algorithm (ICA)

A New Three-mode Maximum Power Point Tracking Algorithm for Doubly Fed Induction Generator Based Wind Energy Conversion System

A Control Strategy for Doubly-fed Induction Generator Wind Turbines under Asymmetrical Grid Voltage Conditions Caused by Faults

Control of A Stand-Alone Wind Energy Conversion System Via A Third-Harmonic Injection Indirect Matrix Converter

Maximum Wind Energy Tracking Wind Turbine System and Simulation

A novel control strategy of wind turbine MPPT implementation for direct-drive PMSG wind generation imitation platform

Improved Direct Power Control of a Wind Turbine Driven Doubly Fed Induction Generator During Transient Grid Voltage Unbalance

A Fuzzy Logical MPPT Control Strategy for PMSG Wind Generation Systems

Doubly Fed Induction Wind Generator Model and Its Operation Investigation

A Modeling Method for the Control Circuit of a Double-Fed Induction Generator in a Wind Power System Based on Multimodel Fusion

Maximum power estimation and droop control of DFIG-based wind turbines in multi-mode microgrids

Multiple Target Implementation for A Doubly Fed Induction Generator Based on Direct Power Control under Unbalanced and Distorted Grid Voltage

Flexible Grid-connection Technique and Novel Maximum Wind Power Tracking Algorithm for Doubly-Fed Wind Power Generator