Abstract:The space manipulator docking hardware-in-the-loop (HIL) simulation system is an important means to simulate the real space docking on the ground. In this paper, a space manipulator docking HIL system is designed, the space manipulator docking dynamics model is established and the motion process of space docking is simulated by a six degree-of-freedom (DOF) parallel robot. Delays exist in the force sensor and the parallel robot of the HIL system and are unavoidable; which not only affect the accuracy of the HIL system simulation, but also lead to instability of the system, resulting in docking failure and damage to the docking mechanism (DM). In view of the contact characteristics of DM, a force and moment compensation method based on three DOF stiffness-damping identification is proposed in this paper. Considering the time-varying characteristics of multi-DOF contact parameters, on-line identification is applied to identify the stiffness and damping in three perpendicular directions. Then a six DOF compensation model is established to compensate the deviation of contact force and moment caused by the delays, so as to improve the stability and reproduction accuracy of the system. Compared with the existing single DOF compensation researches, the considering of contact parameters and the model of compensation in this paper are all applicable to multi-DOF system. Moreover, the compensation model doesn't need the model and delay characteristics of the parallel robot, so it is a model-free compensation. The effectiveness of the proposed compensation method is verified by simulation and experiment.

Simulation study on dynamics model of two kinds of on-orbit soft-contact mechanism

Design and Simulation of Dual-mode Transmission Joint for Spatial Soft Capture

Study on Impact Energy Absorption and Adhesion of Biomimetic Buffer System for Space Robots

Modeling of an On-Orbit Maintenance Robotic Arm Test-Bed

Haptic Simulation of Multibody Contact Dynamics for Fixture Loading Planning

Dynamics Modeling and Simulation of Deployable Mechanism with Double Clearance

Analysis and experimental validation of dynamics simulation system containing position loop

Capture Dynamics Modeling and Simulation of the Space Flexible Manipulator.

Force and Moment Compensation Method Based on Three Degree-of-Freedom Stiffness-Damping Identification for Manipulator Docking Hardware-In-The-Loop Simulation System.

Modeling and Analysis of the Multiple Dynamic Coupling Effects of a Dual-arm Space Robotic System

An enhanced continuous contact force model for deployable structures with clearance joints: Validation, simulation, and dynamic characteristics

Dynamic simulation of articulated soft robots

Mechanism and Application of Attitude and Orbit Coupling Dynamics for Spacecraft Proximity Relative Motion

Advances in Researches of Dynamics Problems for Free-floating Manipulator

Dynamic investigation of a spatial multi-body mechanism considering joint clearance and friction based on coordinate partitioning method

Capturing dynamics of a space manipulator end-effector with snare capture and retract operations

An Efficient Dynamic Modeling and Simulation Method of a Cable-Constrained Synchronous Rotating Mechanism for Continuum Space Manipulator

A continuous contact force model for the impact analysis of hard and soft materials

Contact-impact Model and Its Discrete Schemes for Revolute Pairs with Small Clearances

Efficient and accurate flexible multibody dynamics modeling for complex spacecraft with integrated control applications

Development and Experiment of Semi-Physical Simulation Platform for Space Manipulator