Abstract:This experiment had adopted the titanium (Ti) doping technique to enhance the cyclic stability and rate capability of the LiNi0.8Co0.1Mn0.1O2 cathode material by 2.7 and 4.3 V vs. Li/Li+, respectively. The XRD, EDS, and XPS analysis results clearly stated that the titanium ions were successfully combined into the ternary oxide lattice through inhabiting the transitional metal locations. In addition, the electrochemical characteristics indicated that the cathode materials prepared through Ti doping had more optimized activation energy for Li-ion migration; meanwhile, it effectively restrained the phase changeover among H2 and H3. Moreover, Ti doping efficiently inhibited the cation mixing. As found based on the investigated doped materials, the 1% Ti-doped LiNi0.8Co0.1Mn0.1O2 possessed excellent comprehensive characteristics. Typically, the Li(Ni0.8Co0.1Mn0.1)0.99Ti0.01O2 displayed excellent rate capability (182.73 mAh g−1 at 0.1 C and 137.07 mAh g−1 at 10 C) and high capacity retention (89.84% after 100 cycles at 1 C), while the bare sample remained 65.41% of the initial discharge capacity. Therefore, for the LiNi0.8Co0.1Mn0.1O2 cathode material, Ti doping at an appropriate amount was notably advantageous to enhancing its electrochemical characteristics.

A facile method to enhance electrochemical performance of high-nickel cathode material Li(Ni0.8Co0.1Mn0.1)O2 via Ti doping

Enhanced Electrochemical Performance of LiNi0.8Co0.15Al0.05O2 Cathode Material via Li2TiO3 Nanoparticles Coating

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

Optimization of the electrochemical properties of LiNi0.8Co0.1Mn0.1O2 cathode material by titanium doping

Investigation on performance of Li(Ni 0.5 Co 0.2 Mn 0.3 ) 1−x Ti x O 2 cathode materials for lithium-ion battery

Mitigation of Cation Mixing of LiNiO2-based Cathode Materials by Li-doping for High-Performing Lithium-Ion Battery

Ti modification to improve the cyclic stability of Ni-rich LiNi0.83Co0.11Mn0.06O2 cathode materials by suppressing mechanical fracture

Effect of Ti ion doping on electrochemical performance of Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode material

Enhancing the Structural Stability and Electrochemical Performance of High-Nickel Cathode Materials through Ti Doping with an Exothermic Non-oxide Precursor

Enhanced Electrochemical Performance of Ti-doped Li1.2Mn0.54Co0.13Ni0.13O2 for Lithium-Ion Batteries

Influence of Ti doping on microstructure and electrochemical performance of LiNi0.5Mn1.5O4 cathode material for lithium-ion batteries

Enhanced Electrochemical Performance of Ti-Doping Li1.15Ni0.47Sb0.38O2 As Lithium-excess Cathode for Lithium-ion Batteries

Gospel for Improving the Lithium Storage Performance of High-Voltage High-Nickel Low-Cobalt Layered Oxide Cathode Materials.

One-Step Synthesis of a Single-Crystal LiNi 0.83 Co 0.11 Mn 0.06 O 2 Cathode with Excellent Electrochemical Properties by Ti 4+ Doping and LiTi 2 O 4 In Situ Chemical Coating Using a Novel Variable Temperature Sintering Process

Stable Electrochemical Properties of Titanium Doped LayeredP2-Type Na0.67Ni0.15 Mn0.85O2 Cathode Material for Sodium IonBatteriesH

Comprehensive study of Ti and Ta co‐doping in Ni‐rich cathode material LiNi0.8Mn0.1Co0.1O2 towards improving the electrochemical performance

Enhanced Electrochemical Performance of a Ti–Cr-Doped LiMn1.5Ni0.5O4 Cathode Material for Lithium-Ion Batteries

Integrated co-modification of PO43− polyanion doping and Li2TiO3 coating for Ni-rich layered LiNi0.6Co0.2Mn0.2O2 cathode material of Lithium-Ion batteries

Enhancement of Electrochemical Performance of Li[Li0.2Mn0.54Ni0.13Co0.13]O2 by Surface Modification with Li4Ti5O12

Stabilizing effects of atomic Ti doping on high-voltage high-nickel layered oxide cathode for lithium-ion rechargeable batteries

Surface Coating with Li-Ti-O to Improve the Electrochemical Performance of Ni-rich Cathode Material