Abstract:Vinylidene fluoride-containing fluoroether rubber has better low temperature performance, expansion resistance and heat resistance. After curing by peroxide, it can be applied to a variety of fuel mixtures and is expected to be widely used in aerospace as a sealing material or other fields. In this work, the thermal degradation and thermo-oxidative aging behavior of Vinylidene fluoride-containing fluoroether rubber cured by 2,5-dimethyl-2,5-di-(tert-butylperoxy) hexane/Triallyl isocyanurate (DBPH/TAIC) were investigated. For comparison, raw rubber without any crosslinking has been taken. The results indicated that the thermal degradation of vinylidene fluoride-containing fluoride rubber started with the degradation of TAIC in addition to the removal of HF on the backbone and the breakage of the side chain of ether monomers. During thermo-oxidative aging, the main chain formed C=C structure under the mechanism of dehydrofluorination. Meanwhile, the molecular chain broke under the action of thermal oxygen and was accompanied by the formation of carbonyl groups. The destruction of the polymer cross-linked structure occured at the TAIC cross-linking point and mainly occurred in the early stage of aging. However, the crosslinking was not completely disrupted, as the crosslinking density increased with aging time. The destruction and recombination of the crosslinked structure occurred simultaneously during the whole aging process and were dominated by recombination. Over-crosslinking after aging reduced the tensile properties of composites. This work contributes to a better comprehending of the stability of fluoroether rubber seals in a thermal-oxygen environment.

Thermal aging resistance of natural rubber compounded with conjugated Schiff base

Mechanical properties and quantum mechanical simulations of natural rubber composites with cerium complexes under aging conditions

Effect of non-rubber components on the crosslinking structure and thermo-oxidative degradation of natural rubber

Enhanced Ozone Aging Resistance of Natural Rubber with 2-Mercaptobenzothiazole as the Constant-Viscosity Agent

Tribological behaviour of acrylonitrile-butadiene rubber under thermal oxidation ageing

Research on low temperature rheological behavior of aging resistant bitumen and mixture

Influence of different antioxidants on cure kinetics and aging behaviours of ethylene propylene diene rubber/low density polyethylene blends

Aging behaviors of trans-1, 4-poly (isoprene-co-butadiene) copolymer rubber

Study on the aging of three typical rubber materials under high- and low-temperature cyclic environment

Thermo‐oxidative aging behavior and lifetime prediction of rubber latex foam with various natural‐to‐synthetic ratios

Functionalized graphene as an effective antioxidant in natural rubber

Surface‐modified mesoporous silica nanorods for the highly aging resistance rubber through controlled release of antioxidant

Improving Thermal-oxidative Aging Resistance of Styrene-butadiene Rubber by Antioxidant Loaded Silica Aerogel

Thermal Aging of Hydrogenated Nitrile Rubber – Loss of Additives and Its Influence on Elasticity Maintenance

Thermooxidative aging of rubber composites based on NR and NBR with incorporated strontium ferrite

Recent progress in the rubber antioxidants: a review

Investigation of Crosslinking in the Thermooxidative Aging of Nitrile–butadiene Rubber

Improved Dual Network Model for Aging of Rubber Composites under Set Strains

Preparation of chitosan‐based macromolecular synergistic antioxidants containing hindered phenolic and secondary amine structures and its effects on thermo‐oxidative aging of styrene‐butadiene rubber/silica composites

Thermal Degradation and Thermo-oxidative Aging Behavior of Vinylidene Fluoride-Containing Fluoroether Rubber

Thermal Oxidative Aging and Service Life Prediction of Commercial Ethylene–Propylene–Diene Monomer Spacer Damping Composites for High–Voltage Transmission Lines