Abstract:To address the impact of load disturbances on the full-speed-range control of an interior permanent magnet synchronous motor (PMSM), an active disturbance rejection control (ADRC) method is proposed. The speed loop employs phased field-weakening control (FW) based on ADRC, while the current loop utilizes proportional-integral-derivative (PID) control. Starting from the motor parameters, the Lagrange multiplier method was used to derive the critical speeds for the maximum torque per ampere (MTPA) and maximum torque per voltage (MTPV) ratios, and the timing for the field-weakening control was analyzed. A full-speed-range control model of the motor was established, and an ADRC-based speed loop controller was designed to achieve smooth transitions between high speeds and anti-disturbance solid capabilities. Based on the proposed control strategy, a 21 kW PMSM was used as the research object, and a full-speed-range control simulation model was developed in MATLAB/SIMULINK to verify the strategy. Compared to the traditional PID control, the simulation results demonstrate that the proposed strategy effectively observes and compensates for load disturbances, significantly reducing initial torque oscillations under three different operating conditions. After a sudden load increase, torque oscillations were reduced by 16%, with the stator current reaching steady state 0.03 s faster, response speed improving by 0.02 s, smooth transitions between speed ranges, and enhanced anti-disturbance performance.

Improved Linear Active Disturbance Rejection Control for IPMSM Drives Considering Load Inertia Mismatch

An Enhanced Sensorless Control Scheme for PMSM Drives Considering Self-inductance Asymmetry

FEA-Based Mathematical Modeling and Simulation for IPMSM Drive with Consideration of Saturation and Cross-Coupling Influence

An Active Damping Method for IPMSM Drive with Small Film DC-Link Capacitor Based on Rectifier Side Current Reconstruction

Enhanced Linear ADRC Strategy for HF Pulse Voltage Signal Injection-Based Sensorless IPMSM Drives

A Robust Deadbeat Predictive Current Control Method for IPMSM

Adaptive Sensorless Control of High Speed Surface-Mounted PMSM Drives with Inductance Estimator Based on Current Error

Linear active disturbance rejection speed control with variable gain load torque sliding mode observer for IPMSMs

Speed Control of Load Torque Feedforward Compensation Based on Linear Active Disturbance Rejection for Five-Phase PMSM.

Control Of Induction Motor Drive Based On Adrc And Inertia Estimation

Nonlinear Active Disturbance Rejection Control Strategy for Permanent Magnet Synchronous Motor Drives

Maximum Torque Per Ampere Control of IPMSM Based on Online Parameter Identification Considering Cross-coupling and Saturation Effects

Active Disturbance Rejection Control for Flux Weakening in Interior Permanent Magnet Synchronous Motor Based on Full Speed Range

A Modified Deadbeat Predictive Current Control for Improving Dynamic Performance of PMSM

A Loss Minimization Control Method for IPMSM Drive System Based on Improved Gradient Descent Algorithm.

Improved current control for PMSM via an active disturbance rejection controller

Current Control Method of Vehicle Permanent Magnet Synchronous Motor Based on Active Disturbance Rejection Control

Improved Active Disturbance Rejection Control for Permanent Magnet Synchronous Motor

Improved Adaptive Linear Active Disturbance Rejection Control for Precise Position Control in Permanent Magnet Linear Synchronous Motor

An Enhanced Linear Active Disturbance Rejection Controller for High Performance PMBLDCM Drive Considering Iron Loss

MTPA Control and Flux-Weakening Control for IPMSM Drives Based on High-frequency Signal Injection